Loading...
Coralvue

Hydros WaveEngine 0-10V Quad Cable

In stock
Out of stock
SKU
250187
$12.99

$12.99
- +

Some pumps do not lend themselves to direct drive control with the WaveEngine due to cabling or other restrictions, but many of these pumps do offer 0-10V controllability. This 0-10V HYDROS WaveEngine Quad Cable supplies four independent 0-10V outputs to control these pumps.

 

Broad Compatibility

Make pumps from different manufacturers work together to provide a single, integrated flow management system. You can now use a VorTech™ MP40WQD at one end of your tank and a Reef Octopus Octo Pulse 4 at the other end of the tank and have them work together simultaneously, opposite each other or completely different. Best of all, it isn’t limited to two pumps! Add a Maxspect Gyre into the pattern if you want too.

 

Do you have a controllable return pump or skimmer? Bring them to the party because the HYDROS WaveEngine will control them too!

 

Clutter Reduction

The clutter of power bricks, cables and controllers is becoming an increasing problem for reef keepers. The four pump driver outputs on the HYDROS WaveEngine replace the pump controller, power supplies and any necessary external wireless control modules. Best of all, the HYDROS WaveEngine can run four pumps off a single power supply!

Needless to say, it is easy to install. Simply toss out your existing power supplies and controllers, connect the HYDROS WaveEngine and you’re ready to start moving water.

 

0-10V INPUT Control

Control any pump via variable speed INPUT. Unlike other controllers that require intricate programming on pumps connected via 0-10V, the HYDROS WaveEngine allows 0-10V INPUT connected Pumps to take full advantage of all native flow modes and presets without complicated coding.

 

Reverse Pump Drive

Some pumps can provide additional pattern options by running in reverse. For example, the Reef Octopus Octo Pulse 4 changes from a highly directed flow to a gentle broad push if you run it in reverse. The HYDROS WaveEngine allows you to take advantage of Reverse Drive to further increase the available flow patterns.

 

Cross Engine Synchronization

Multiple HYDROS WaveEngines can be used to control even larger number of pumps and the patterns will remain perfectly synchronized. A pump connected to HYDROS WaveEngine “A” will run in perfect synchronization with a pump connected to HYDROS WaveEngine “B”.

 

Remote Access

A FREE and easy to use iOS and Android compatible app allows you to control everything including flow modes, schedules, pump configuration, as well as monitor performance. You will have no problem with connection because the app can run in cloud mode or local mode.

Cloud mode allows you to communicate with your HYDROS WaveEngine when an internet connection is available. The HYDROS WaveEngine system is part of the Amazon Web Services (AWS) and Internet of Things (IoT) platform, guaranteeing high security and reliability.

Local control gives you the option of direct access to your control settings in the event your internet connection is unavailable. No matter your situation, the HYDROS WaveEngine will work to keep your tank alive!

 

Battery Backup

An optional battery backup system (sold seperately) is available so that the HYDROS WaveEngine will move into more energy-efficient patterns (defined by you) to allow circulation to continue through the power failure automatically.

 

Real-Time Monitoring and Notifications

You can set up text message alerts and/or emails to be notified if a pump is blocked or disconnected. If total power failure takes place at your home, bringing down your entire tank and internet connection, you will still be notified via email or text.

 

Do your pumps ever get dirty and drop in performance?

The HYDROS WaveEngine will monitor the power being consumed by each pump along with its shaft RPM and will notify you if the pump’s performance is suffering and may require maintenance.

 

Third Party Integration

The HYDROS WaveEngine is compatible with 3rd party controllers such as the Neptune Systems APEX, the Reef Angel, GHL Profilux and others via the 0-10V control port.

  • Control Pump Speeds
  • Trigger Flow Mode Changes

 

Splash Proof Enclosure

The HYDROS WaveEngine is sealed in a watertight case with industrial splash proof connectors for safe and long-lasting operation. Why would it not be if intended for aquarium use?

 

Hydros Compatible Pumps

Make and Model

Direct Connect


Connect directly to the pump
removing the clutter of the
power brick and the controller

0-10V Pump Input


The Hydros WaveEngine supplies
four independent 0-10V outputs
to control these pumps

Wireless RF Controlled


EcoTech Marine Vortech pumps
can be controlled using their
wireless "slave" mode
Maxspect Gyre
XF130 / XF230
- -
Maxspect Gyre
XF150 / XF250
- -
Maxspect Gyre
XF330 / XF350
- -
Maxspect Gyre
XF280
- -
IceCap
Gyre 1K & 3K
- -
IceCap
Gyre 2K & 4K
-
Reef Octopus
VarioS-2 & VarioS-4
-
Reef Octopus
VarioS-6 & VarioS-8
- -
Reef Octopus
Octo Pulse 2 & Pulse 4
-
Abyzz
A100, A200, A400, A1200
- -
Abyzz
AFC 400
- -
Aqua Illumination
Nero 5
- - -
CoralBox
QP-9+ & 16+
- -
Current USA
eFlux
- - -
EcoTech Marine
Vortech MP10WQD, MP40WQD, MP60WQD
- -
Jebao
WP, RP, PP, FS and SW Series
- -
Skimz - - -
Tunze Turbelle
Nanostreams
- -
Waveline
DC 6000 & 10000II
- -
More Information
UPC 850009641069
Write Your Own Review
You're reviewing:Hydros WaveEngine 0-10V Quad Cable
Your Rating
Only registered users can write reviews. Please or

Product Questions

My Gyre 330 is connected to 2 ice cap back up batteries. If I were to use the Hydros engine to control and power it, will I be able to use my back up batteries? If so how would i do so?
Question by: Sean Brown on Feb 1, 2023, 4:44 PM
Thanks for the question! I would suggest looking at the following:

https://www.coralvue.com/hydros-icecap-battery-backup-cable-kit

Answer by: James Johnson (BRS Staff) on Feb 16, 2023, 3:26 PM