- 10.00 pH Calibration Fluid - Neptune Systems
Keep your pH probe calibrated!
Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.
Over the course of a couple months, it is common for pH probes to not read exactly correct and that can be fixed by calibrating your probe. Almost all monitoring devices will allow you to calibrate your pH probe, and a majority of them will let you calibrate your probe to a high and a low point. For saltwater aquariums, it is best to use a calibration solution with a pH of 7.0 for the low point and 10.0 pH for the high.
We recommend calibrating standard pH probes every 3 months or as needed, where double junction pH probes can go up to 6 months before calibration is required.
1x 10.00 pH Single Use Calibration Packet
Quality 10 By Rock1 on 9/18/2018Rock1 would recommend this product to a friendI spent hours trying to figure out why Apex couldn't calibrate my probe with the 10 solution I bought at my lfs. This solution did the trick in under 30 seconds and didn't require me to do 1,000 rituals that I read about on the forums.
There are no videos related to this product.