- Replacement LED Cover for Refractometers - Bulk Reef Supply
If you are constantly searching for the right light source to read a refractometer, you may want to upgrade your current refractometer to utilize a LED illuminated prism cover. The cover has a built-in LED light that will give you consistent readings and never leave you without proper light to take a reading. Installing the LED Cover only takes a minute, just loosen the set screw on your current cover, slide it off the refractometer and slide on the new one. Once the new cover is on, just press it down against the prism and tighten the set screw.
Suggested Refractometer Body Diameter - 0.965" (24.6mm)
- Works with BRS Refractometers
- Compatible with other brands
- Can be replaced in minutes
- Included onboard battery lasts for years
1x LED Refractometer Prism Cover
Too much light By Stephen on 7/5/2020Stephen wouldn't recommend this product to a friendI purchased this to help me read the refractometer without having to hold it up to a window or ceiling light. In a normally lit to dark room it completely washes out the refractometer and turns the whole scale blue. If I open the door or hold the refractometer up to a sunny window I can read it again without turning on the led. When I do however it reverses the colors on the scale. Too much light I think, at least for the refractometer it's pictured on here. Great idea but a little too powerful. Kind of a bummer considering I had to cut the clamp off my old cover when I replaced it with this one due to stripped screw so now I'm stuck with it.
Works at first, dead now By Glenn on 8/6/2019Glenn wouldn't recommend this product to a friendI don’t know how this little dude works electronically, but apparently whatever it is, it cannot be around water. My stopped working after maybe 50 or so uses over the course of a few months. And I stripped the screw trying to get it in place, so now I may be looking at a whole new refractometer. This is the second product I have bought from BRS that disappointed me. The first was the actual refractometer itself which has always had a busted focus adjuster. I may need to look toward Hanna at the point.
Work Grate By John on 6/5/2019John would recommend this product to a friendAdd This To My Old Refractometers To Replace The One That Has No Led Works Grate No More Need For A Over Head Light Just Push The Led On The Led Is Bright And Easy To See