How To Install The Value to Universal RODI Upgrade - BRStv

June 5th, 2015
0 Views
The BRS 4 Stage Value System provides the best blend of features and performance to cost, and is one of our most popular units. But what if you purchase this unit and realize you have a high level of chloramines in your source water? Luckily there is an affordable upgrade path to convert your 4 Stage Value System to a 6 Stage Universal System for just this purpose.

In a normal 4 Stage Value System setup the single Universal Carbon Block filter will do most of the work to remove a majority of the chloramines, however the longer the system runs the more chloramines will be able to work through the filter. This is known as chloramine breakthrough. In most cases a majority of the chloramines are capable of passing straight through the membrane which depletes the more expensive DI resin prematurely. Once the DI resin is depleted, you could then be adding a mixture of chlorine and ammonia to your aquarium.

Our Value to Universal Upgrade Kit will add a second Universal Carbon Block to your Value RO/DI to polish the water and ensure that if any chloramines were to breakthrough, the second filter will catch them. For example if your carbon block was allowing ten percent of the chloramines through, the second carbon block would remove that 10%.

This kit also includes an additional DI cartridge which allows you to remove trickier elements that require longer contact time like phosphate for example. Ideally with the dual DI setup you would be able to keep the second canister full of fresh DI continuously by swapping the second stage to the first stage and adding a brand new fill to the second stage.

Installation is super easy! The kit includes two RO canisters, a couple brackets, eight screws, four quarter inch Murlok push-connect fittings, some tubing, and a 6 Stage Universal Filter Kit. Everything is preassembled so there are no tools required.
Simply mount a canister on each side of the unit with a few inches to spare for tubing connections.

Once the canisters are mounted, shut off your RO/DI system, disconnect the water feed line from your system, and connect it to the first canister. You now have a new sediment filter housing! Then connect your new sediment canister to your RO/DI system with a short length of tubing.

On the opposite side clip the already attached tubing so you can insert it into the intake of your second DI canister, and place the other end of the purified product water line into the out of the second DI.

Lastly put the sediment filter in the first canister, your two carbon blocks in the housings on the body, and the DI in the final canister. That’s really all there is to it!

Have questions? Let us know in the comments below! Be sure to hit subscribe so you don't miss our new video coming out next Friday.

Connect with us on Facebook: http://www.facebook.com/BulkReefSupply

Check out our pics on Instagram: http://instagram.com/bulkreefsupply

*Legal Stuff*
The purpose and content of this video is to provide general information regarding the products and their applications as presented in the video. Aquatic sales solutions, inc. And its officers, directors, employees and agents disclaim all express or implied warranties, in any way, related to the products and their application as presented in this video, make no representation or warranty regarding the products and the application as presented in this video and shall not be liable for any direct or indirect losses or damages of any type, including but not limited to punitive damages, or from personal injury or death resulting from or in any manner related to the video, and the products in and contents of the video. The viewer expressly agrees that aquatic sales solutions, inc. and its officers, directors, employees and agents shall not be liable for any damages or losses related to the products in and content of the video and hereby agrees to hold the foregoing harmless from any such losses or damages.
Show All Videos