- BRS Bulk Calcium Chloride Aquarium Supplement
Maintaining proper calcium levels helps achieve the essential balance of calcium and alkalinity in your tank. BRS Bulk Calcium Chloride is crystalline dihydrate and dissolves crystal clear and doesn't produce a lot of heat unlike the anhydrous pellets which are often mix cloudy and produce a significant amount of heat.
Bulk Reef Supply constantly strives to provide the best additives possible at the best price. BRS Bulk Calcium Chloride is produced using only the best pharmaceutical grade material available and meets strict BRS purity standards. For best results, use as part of the popular 2 Part Calcium and Alkalinity solution as well as a stand-alone calcium supplement.
Bromide, Ammonia and Phosphate Free
See Mixing Instructions in Full Details
Four Sizes Available:
Replacement Pouch - Makes 1 gallon of solution when mixed
1/2 Gallon - Makes 3.2 gallons of solution when mixed
1 Gallon - Makes 6.4 gallons of solution when mixed
5 Gallon - Makes 32 gallons of solution when mixed.
TO RAISE CALCIUM LEVELS
- Test current calcium level
- Use our Reef Calculator
- Input required information and select Recipe 1 Calcium Solution
- Follow calculator’s guidelines when adding to tank
WHAT YOU WILL NEED
- 1 Standard 8 oz. dry measuring cup
- 1 Empty 1 gallon jug
- 1 Funnel
- 1 RO/DI or distilled water
Add 2½ dry measuring cups of calcium chloride to a gallon jug and mix with RO/DI or distilled water to create a full gallon of solution.
Recommended Starting Points for Daily Dosing
|Predominantly LPS and soft corals||.1 mL per gallon|
|A few hard SPS corals and clams||.2 mL per gallon|
|Numerous full sizes SPS colonies and clams||.3 mL per gallon|
BulkReefSupply.com recommends maintaining calcium levels at 420ppm.
Excellent product By ReefAce on 11/27/2017ReefAce would recommend this product to a friendDosing with an auto-doser imho is by far the easiest and most accurate way to keep balanced Ca/Alk/Mg levels. The BRS product is inexpensive when purchased in the 5 gallon bucket size and is clean and easy to mix. The online calculator is helpful too if your numbers get out of whack for some reason.
Love this stuff By Tom on 11/25/2017Tom would recommend this product to a friendI only use BRS supplements in my aquarium. This stuff lasts a long time and is extremely easy to use. Couple this with the calculator they provide on the website and dosing is made fool proof.
Works for me By David on 10/31/2017David would recommend this product to a friendI use with BRS Soda Ash and BRS dosers.
Works great By Anthony on 10/25/2017Anthony would recommend this product to a friendNo issues mixes easily, great product as with everything else from brs.
Very good product. By Gary P on 7/18/2017Gary P would recommend this product to a friendAlways mixes up good and keeps my calcium level good in my tank.
Good Stuff By G on 4/7/2017G would recommend this product to a friendBeen using it for about a year, Works great the cost difference between red sea and 2 part is a lot.
Calcium Boost By Shannon on 3/20/2017Shannon would recommend this product to a friendGreat value for quality products as usual from BRS. Got my calcium up in no time.
Excellent Product and Value! By PDCCO on 2/11/2017PDCCO would recommend this product to a friendDoes exactly what it is meant to do. I use the Calcium with BRS Soda Ash & Magnesium supplements all dosed with pumps on interval timers. Maintains water chemistry nicely between water changes.
I have been using the BRS supplements for many years, best products and best value you can find anywhere!
good product By Tony on 1/24/2017Tony would recommend this product to a friendWorks great no problem maintaining CA level, only problem is getting it all to dissolve
Great product By Steven on 12/13/2016Steven would recommend this product to a friendExcellent source of calcium. Clean and pharmaceutical grade is always a plus.
Great product By Lloyd on 12/11/2016Lloyd would recommend this product to a friendGreat product and service! Shipped faster than expected . . . free too! I would definitely recommend BRS!
BRS bulk calcium chloride By Chuck on 10/7/2016Chuck would recommend this product to a friendI have always had good luck with BRS 2 part dosing.
This video is a demonstration of a few aquarium su ...
Maintaining calcium and alkalinity in your saltwat ...
Starting at: $35.99
Special Price: $50.99
Special Price: $69.99
There is no shelf life as long as they are stored with lids and the water does not evaporate. Feel free to let us know if you have any further questions!
On the Reef Calculator for calcium, I only see 2 part solution, dry calcium, and alternative 2 part. I don't see an option for basic calcium chloride solution. Should I use the 2-part solution and use half for just calcium?
On the reef calculator you will use the 2 part calcium solution option. Feel free to let us know if you have any further questions!
Ideally the measurement will be in dry cup opposed to weight, often humidity will effect the weight of the crystal and cause a difference. Feel free to let us know if you have any further questions!
Have a great day!
Bottles lids have 1/4 bulkheads and a pin hole.
If you are experiencing discoloration or cloudiness in your solutions, this may indicate a minor amount of impurities present in your water you are using to mix the solutions. I would ensure that there is no way for the solution lines to contact your tank water and that the tank water cannot travel back through the lines to the dosing vessels. The discoloration you are seeing could also indicate that you should look into the filter maintenance for your RODI, but usually there is nothing to be concerned about as the high pH and concentration of soda ash will typically cause most impurities to precipitate out of solution, and the solutions themselves don't really go bad so long as they aren't contaminated.
Great question, and if you were to use sodium bicarbonate, and mixed your calcium to what we suggest when using sodium bicarbonate instead of soda ash, you will want to use the Alternative Calcium Solution. All in all, both are calcium chloride, and the only different is the alternative is about ½ the concentration and almost twice as much will need to be dosed to raise your calcium the same amount as the standard mixture. If you play with the numbers in the calculator, you should see that the alternative requires just about twice as much solution for the same PPM to be dosed.
Have you mixed the calcium up into a solution per the instructions on the bottle? If so, you would use the "recipe 1 calcium solution" option. If you have not mixed the calcium into a solution then you would select the option for dry calcium chloride crystals.
The resulting solution comes out at about 37,000ppm.