- Prime LED Tank Mount - Black - Aqua Illumination
The AquaIllumination Prime Tank Mount is an elegant mounting solution on both rimmed and rimless tanks for your AI Prime. The innovative ball joint makes it simple to tilt, turn, and adjust your light to your corals preference. The AI Prime Tank Mount is made from high quality brushed aluminum available in black or silver and looks great over any setup.
- Elegant - Simple, yet highly effective modern design
- Adjustability - Integrated ball joint enables custom aiming and positioning of your AI Prime
- Max Tank Thickness - 1.25"
- Vertical Arm Height - 11.25" (adjustable)
- Horizontal Arm Length - 9.5" (adjustable)
What's in the Box?
- Two Piece Mounting Arm
- Aquarium clamp/hardware
- Light mount/ball joint assembly
- Allen key
Note: Light not included
Awesome By B_dawk on 3/29/2017B_dawk would recommend this product to a friendSimple to put together and looks great over my rimless 32 Biocube
Really sturdy By MaK on 2/7/2017MaK would recommend this product to a friendOverall the product was made very well, but I did have a few problems with it. I found that it was a little too long for my tank and I couldn't back it up because it hit the wall. I didn't have enough space to put the light directly over the water, it came out about and inch and a half too far. Good thing is, I have a welder in my family and he was able to cut it. Took off the inch and a half and voila. Perfect fit. Another minor detail, is that I find they didn't have enough detailed instructions with it but I just googled it and had no problems after that. Like I said, the product is made very well, just that problem with the length, for some it would be a major problem but thankfully I had a backup plan.
Excellent product By bemi29 on 7/11/2016bemi29 would recommend this product to a friendEasy to setup and works perfectly.
It Successfully Holds the Light By Kyle on 1/29/2016Kyle would recommend this product to a friendPeople it's a Light stand. Granted there were issues with earlier models which were fixed. I have the latest revision. It was simple to put together, even without instructions. I have one major issue with the design however that I definitely feel AI should address. The Power cable is not detachable; so when you are situating the light or if you have to rotate the light, there is a high possibility and probability that you will in fact slice through the black insulation on the power cable. This is a pretty poor situation given how much you pay for these things and how you either hang them or use these mounts... One would figure it wouldn't effectively cut up the only wire coming out of the unit....
Mount works as intended on my tank. By KGro on 1/4/2016KGro would recommend this product to a friendI am not sure why everyone else is experiencing headaches with this mount. I installed it on my tank and have had zero issues. I set the light in the position I wanted, tightened down the screw on each side of the ball joint where the mount connects to the light fixture and it has been solid. I would not recommend trying to adjust the lights position with out loosening the ball joint screws or the plastic friction ring might get compromised. In all the reviews I read that seems to be the problem. I am happy with the mount. I would give five stars if it were a bit more refined.
Worked great for mee By Michelle on 11/12/2015Michelle would recommend this product to a friendThis bracket worked just fine for me, no dropping of the light, just tighten the screws around the ball joint and the light stays in any postion you like.
works perfect By jstanny on 9/13/2015jstanny would recommend this product to a friendthis mount works flawlessly there are two bolts on the ball joint tighten them down with included allen wrench and it wont tilt down on you. hides wire well. for the money you cant beat it.
Good By Fish13 on 8/11/2015Fish13 would recommend this product to a friendThe light mount is good could be better though.
AI service is great By Soe Min on 6/28/2015Soe Min would recommend this product to a friendNice mount. I also has the tilting issue. Contact AI customer service and they ask me for my address and shipped the new mount piece right away.
Could be better By Edward on 6/24/2015Edward would recommend this product to a friendFor of having a nice light Aqua illumination could of made a better light holder, it tilts made myself a rubber washer to have a better grip so it won't tilt, working so far.
AI Has Great Customer Service By Jdkrockstar on 5/17/2015Jdkrockstar would recommend this product to a friendAlthough what everyone else has said is true, no one has talked about the AI customer service. I bought this product and experienced the drooping light. This was due to a manufacturing issue with the plastic piece that fits in the hole the metal ball sits in that they have since fixed. I contacted AI support via the website and explained my issue. In addition, when I tried tightening the screws, I stripped one of them.
AI sent me a brand new mount to replace mine but it still had the drooping issue so I contacted them and they sent out the part right away and I had it within a few days. Now it works flawlessly.
Poor Design By Zarn on 5/14/2015Zarn wouldn't recommend this product to a friendDo not buy this mounting arm. When you place any pressure on the screw to hold the light puck in place the swivel ball will push through the arm. Save your money and look elsewhere
Will these tank mounts support getting the AI Prime LED to the middle (front to back) of an IM 30l?
This mounting arm has a max horizontal length of 9", so it should work just fine for your tank. Have a great day!