- 50/50 Lumi Lite Strip LED - Reef Brite
Lumi Lite 50/50 LED Strips are ideal for a single light tank, or adding a full-spectrum light to other lights that may be lacking in certain spectrums.
High powered LEDs have been carefully selected to create a multi-spectrum actinic along with high-growth daylight to help bring out the fluorescence in corals, fish, and invertebrates while adding a little extra shimmer.
- 12 Inch
- 24 Inch
- 36 Inch
- 48 Inch
- 72 Inch
Actinic Blue - These have a deep blue spectrum around 420-440nm and produce brilliant fluorescence in corals. This light can be paired with any other Lumi Lites to bring out the pop in corals.
White - A neutral white that produces great growth and shimmer. These on their own do not produce the best overall color for reef aquariums but when paired with a 50/50 or Actinic Blue Lumi Lites the color is sharp and approximately 20,000K.
50/50 - An even blend of alternating Actinic Blue and White LEDs. We recommend pairing these with either 1 Actinic Blue or 1 Daylight White Lumi Lites LED.
Lumi Lites can add that extra shimmer, and pop that you are looking for in your tank. Each Lumi Lite comes with mounting legs that will let you mount them directly to your tanks rim Add one to your current lighting system, or create your own custom lighting array. We do suggest using a small amount of velcro or double sided tape to secure the mounting legs.
24 LEDs per foot
Dimensions - 1.25" W x 1.1" H
Power Cord - >8'
Approximate Power Consumption - 1W per inch (example - 24" Lumi Lite uses about 24 watts)
1x Lumi Lite LED Strip Fixture
1x Power Supply
2x Tank Mounting Legs
No more shadows!! By Kyle on 9/10/2019Kyle would recommend this product to a friend100% satisfied with these lights. These lights are great for eliminating the shadows caused by my primary led light fitxure. Like most, my main led lights are mounted centered in the tank, leaving me with shadows when the fish swim on the top corners of the tank and shadows along the sides of some of my aquascape. Being so slim, the lumi lights can be mounted right along the edge of the aquarium, eliminating all these annoying shadows!!! All without any additional light spill over. If you can’t go coast to coast led lighting, adding these are the next best thing. Another plus, is unlike t5’s these won’t decrease shimmer. I like a lot of blue in my tank and was originally worried the 50/50 may end up being too white but this was simply not the case. The color on these are great and really illuminate the tank. I probably wouldn’t recommend these lights if you are looking to add some additional power to your lighting system for say coral health or looking to get shimmer from a t5 fixture. Let’s be fair, these lights are only 72 watts and very tiny. Reef brite makes other models for that purpose. But if you’re like me and just want to get some more light spread in your tank these are great!!! Couldn’t be happier. I have a 210g room divider tank and ended up buying one of these for each side of the tank. Seeing the light spread these add I think they will probably allow me to lower my primary lighting hood a few inches which is another plus. Highly recommended
Low profile and great light output By Eric on 10/12/2017Eric would recommend this product to a friendThis light has great color and a really low profile. The color in the tank has been great and the spread is good.
Superior led strip light By FLSharkvictim on 6/23/2017FLSharkvictim would recommend this product to a friendI have my mounted above my sump, and it lights up my entire sump area big time!
What's the difference between the lumi lite and tech lights? Does both come with brackets to attach to a T5 ATI fixture?
The Lumi-Lite strips utilize somewhat less powerful 1 watt LED's driven at approximately 1/2 watt each. These provide great gentle coverage over a wide area and are perfect for accenting the tank with some extra LED pop. They include legs for mounting to the tank rim. The Tech LED's utilize 3 watt LEDs driven about about 1.5 watts each, giving a little more power and shimmer. They are designed to provide a similar amount of light as a T5 or VHO bulb, and are great for adding to a T5 fixture where you want that LED pop or shimmer. The Tech LED fixtures include the mounting brackets to attach to a T5 fixture such as the ATI sunpower. Other fixtures may not have the mounting holes and may require modification to work with these brackets.
Hey there BRS, any idea what the PAR reading are like for these? I'm looking for a light to go in my 3 gallon SPS dominated pico.
We are unable to say what the PAR will be, that is dependent on factors like clarity of water and surface agitation and how high the lights are above the water. I would not consider this to be the only light over SPS coral.