Loading...
EcoTech Marine

VorTech MP10QD QuietDrive Propeller Pump - EcoTech Marine (RETIRED)

In stock
SKU
300283
$212.49

Earn 212 Reward Points Earn 3,180 Reward Points

$249.99
- +

In a reef aquarium, having the perfect amount of flow and water movement is crucial to the health of your animals, as well as the overall success of the tank.  With the VorTech Quiet Drive, choosing the proper water circulation equipment has never been more simple.  VorTech pumps are designed by aquarists to be the standard in wave-making technology:

  • Create massive water movement
  • No hotspots
  • Three dimensional flow
  • Comprehensive flow modes
  • Ultra low-profile design
  • Safe

 

EcoTech VorTech QuietDrive Features:

In a reef aquarium, having the perfect amount of flow and water movement is crucial to the health of your animals, as well as the overall success of the tank.  With the VorTech Quiet Drive, choosing the proper water circulation equipment has never been more simple.  VorTech pumps are designed by aquarists to be the standard in wave-making technology:

  • Create massive water movement - Adjustable flow rates with included controller allow you to dial in a setting that is tailored to your aquarium
  • No hot spots - With its broad flow pattern, the VorTech QuietDrive eliminates "flow hot spots"
  • Three-dimensional flow - A unique patented design is unrivaled in creating three-dimensional flow conditions and gyres
  • Comprehensive flow modes - 12 different flow modes allow you to choose the best setting for happy corals and fish
  • Ultra low-profile design - With its patented design, the VorTech QuietDrive is the least visually obtrusive pump on the market
  • Safe - No electrical components in the aquarium greatly reduces the risk of electrical shock to you or your animals.  

 

Multiple Flow Modes

Lagoon Mode

Lagoon Mode

Simulating a low-energy lagoon. The QuietDrive motor slowly changes, recreating the gentle currents of a lagoon environment.

Reef Crest Mode

Reef Crest Mode

Simulating currents found around high energy reefs. The pump changes speed frequently emulating crashing waves and tidal surges.This is a great mode for SPS corals.

Gyre mode

Gyre Mode

Uniform circular flow creates motions that help transports water from one side of the tank to the other. With two pumps paired in Gyre Mode, you can oscillate between a clockwise and counterclockwise gyre that lasts from 2 seconds to 2 hours.

Short Pulse Mode

Short Pulse Mode

Strong short pulses that can be set at intervals of 0.2 seconds up to 2 seconds. This mode can create a standing wave in your tank with the correct frequency.

Tidal Swell Mode

Tidal Swell Mode

A harmonic balance of the ever changing conditions found in the ocean. TSM will vary from calm flow all the way up to chaotic high flow and it even has a pre-programmed detritus cleaning surge that will help suspend particles to be swept into the filtration system.

Nutrient Transport

Nutrient Transport Mode

NTM is programmed to create a two-phase circulation flow mode. Phase one consists of wave motions to help stir up and suspend detritus while the second phase incorporates surging motions to help push particles towards the overflow and down into the filter system. This is our favorite mode and is especially great for sensitive corals like LPS and SPS.

 

Function Modes

Feed Mode

Feed Mode

Pause all of your wireless Ecotech Pumps at the push of a button. Pumps will turn down to an idle speed allowing you to feed your tank without the food being pushing into rocks or into the filtration system.

Night Mode

Night Mode

Simulate a calmer environment for night time hours. Night Mode can be enabled or disabled with custom hours programmed to automatically turn on and off.

Wave Auto Tune

Wave Auto Tune Mode

Create a standing wave in your aquarium to help sweep detritus and other foreign particles from the sandbed. It is amazing what will magically float out of the rocks when a standing wave is created. We highly suggest pairing two wireless pumps for this mode to get the full effect!

 

What’s Included?

1x VorTech QuietDrive Pump

1x QuietDrive driver/controller

1x Spacer

1x Foam Guard

1x Mounting hardware kit

1x Power supply

 

VorTech QuietDrive Quick Compare
Pump Wireless? Max Flow Rate Tank Size Maxiumum Tank Thickness Power Consumption
MP10QD No 1,500+ GPH 2.5 to 50+ gallons 0.375 inches (9.5mm) 8 to 18 watts
MP10wQD Yes 1,500+ GPH 2.5 to 50+ gallons 0.375 inches (9.5mm) 8 to 18 watts
MP40wQD Yes 4,500+ GPH 50 to 500+ gallons 0.75 inches (19mm) 9 to 38 watts
MP60wQD Yes 7,500+ GPH 120 to 1,000+ gallons 0.375 to 1.00 inches (9.5 to 26mm) 10 to 60 watts
More Information
Product Name VorTech MP10QD QuietDrive Propeller Pump - EcoTech Marine (RETIRED)
SKU 300283
Out of stock message RETIRED
UPC 748252303615
Write Your Own Review
You're reviewing:VorTech MP10QD QuietDrive Propeller Pump - EcoTech Marine (RETIRED)
Your Rating
Only registered users can write reviews. Please or

Product Questions

Can you link up master/slave 2 mp10qd. Or is it only the mp10wqd that will link together?
Question by: Rossel on Aug 30, 2018, 11:26 PM
Great question! These drivers will have to be wirelessly compatible to run the Master/Slave functions between the two pumps.
Answer by: Nick Gansen on Aug 31, 2018, 11:39 AM
is this reeflink compatable?
Question by: Matthew Thompson on Mar 10, 2018, 2:06 PM
The MP10QD is not compatible. You will need the MP10WQD, which has wireless control.
Answer by: Chad on Mar 14, 2018, 3:52 PM
Will these units work and/or communicate with an Apex controller? Especially with using two of the water movement features I want to use at different times of the day.
Question by: Kale on Dec 24, 2017, 4:06 PM
Thanks for contacting BRS!

Ecotech Marine Vortech pumps are Apex friendly, but you will need to purchase the WXM module for them to controlled by the Apex.

Have a great day!
Answer by: Josh Cuta on Dec 26, 2017, 4:38 PM
Hi! I have one mp40 for my 120 gl tank. I was thinking in add one mp10 but my glass is 10 mm of thickness.

It doesn't work with with 10 mm or is just a best practice to follow?
Question by: Sergio Miller on Jun 5, 2017, 3:11 PM
The glass thickness recommendation should definitely be adhered to. At greater thicknesses, there can be issues with the dry side and wet side getting good connection and the dry side can fall off the glass easily. For tanks of this size, unfortunately even though the flow may be fine in some setups, the MP10 just can't work reliably, and we recommend moving up to the MP40.

Have a great day!
Answer by: Zack on Jun 12, 2017, 1:57 PM
Hi,

I'm interested in purchasing an mp for my 72 gallon 1/2 circle oceanic, soft corals only, will 2 mp10qd suffice or do I need to upgrade to two mp40's? Glass thickness seems to be ok for both models.
Question by: AP on Dec 26, 2016, 5:05 AM
Great question! For that size of tank, I would recommend two MP40s for proper flow. The great thing about getting the larger pumps is that you can dial them down and they grow with you for future builds. :-)
Answer by: Randy on Dec 26, 2016, 10:47 AM
I have a 75 gallon and I was wondering if 2 MP10s would be enough or if one MP40 would be enough for the tank
Question by: Duncan on Nov 19, 2016, 12:25 PM
Great question! Two MP10s will not be enough for your 75gal tank. I would recommend one or two MP40s. :-)
Answer by: Randy on Nov 22, 2016, 9:42 AM
I have two hydor 425 powerhead controlled by a smartwave controller in a fusion nano 20. I was wondering if one of these would have enough flow to be able to replace the 2 hydor powerhead I'm my tank
Question by: kyle reimer on Jul 16, 2016, 11:05 PM
Hi Kyle,
The Mp10QD pumps can push out quite a bit of flow. Having two pumps does have its benefits of needing less overall flow to keep dead spots to a minimum and the ability to change the direction of the flow. However for a smaller tank, you can easily get away with a single pump that is controllable. The biggest concern with a single pump is allowing water to flow back and forth instead of just a constant stream.
Answer by: Charlie on Jul 18, 2016, 11:11 AM
Hi guys I have a 3x2x2 what pumps would you recommend for a sps tank thanks
Question by: Marcus on Jul 11, 2016, 7:59 PM
Hi Marcus,
For an SPS dominant tank of that size we would suggest a minimum of two Mp10QD pumps to get it going. Then once the SPS starts to grow and branch out, you could easily find yourself needing one or two more to get flow everywhere throughout the tank depending on how much coral is in the tank, and the aquascape.
Answer by: Charlie on Jul 12, 2016, 7:28 AM
Can I use two of these on my 36" W x 16" H x 15" D acrylic tank? I don't have wifi, but will they sync to make
a good wave pattern, or do I need a MP1W0QD, as well as a MP10QD?
Question by: jesse james on Jun 29, 2016, 4:08 PM
Certainly will work well! These do not use Wifi and can communicate with 2 by purchasing the W model. With the non wireless module they will not communicate. Feel free to let us know if you have any further questions!
Answer by: Connor on Jun 29, 2016, 5:33 PM
Can I use a mp10 for a 60 cube 24x24x24 or should I go with mp40?
Question by: Ervin on Apr 19, 2016, 7:46 PM
Great question!
You can use a single mp10 on a 60 cube just fine! For ideal flow patterns you may add an extra pump to keep dead zones at bay. Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 25, 2016, 6:52 PM
I have a fluval spec V 5 gallon tank. I'm looking for a controllable wavemaker that it is not overkilling. Do you think I can use this one on it?
Question by: Daniel Vazquez Guevara on Apr 18, 2016, 2:13 PM
While this may work on its lowest setting. We recommend much smaller power heads such as Nano Korallia or other nano pumps. Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 25, 2016, 6:47 PM
Would two of these be adequate for a 48" 75 gallon?
Question by: Michael Harmon on Apr 14, 2016, 11:35 PM
Great question!
The flow rates would work well however you will need to ensure the glass thickness is under 3/8" or the Vortechs will not mount. In many cases we are forced to use the MP40 due to the glass thickness being 1/2". Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 19, 2016, 3:43 PM
Will this provide enough flow for a 50 long? Non sps tank that is.
Question by: Greg on Mar 31, 2016, 8:29 PM
Great question!
This certainly can work well! Keep in mind this work on glass up to .375" thick. Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 1, 2016, 3:32 PM
Sign Up Now