- Ultimate ATO - 4 Sensor Auto Top Off System - Xp Aqua
Xp Aqua's Ultimate ATO - The most complete ATO on the market
With 2x dual-optical sensors, the Ultimate ATO is the first ATO to include 4 sensors. The 4 sensors allow a dual-stage overfill alarm that is less intrusive as well as a run-dry protection feature that prevents your sump from running dry, which is also a first.
With so many accessories in the box, the Ultimate ATO is the most complete and versatile ATO system we've seen. An efficient DC pump is included for a standard installation. If you require a larger ATO pump for a remote sump installation, a Socket Switch is included that allows you to run a pump up to 10A (1,200W). They even include a solenoid valve for aquariums that are topped off directly with an RO/DI system.
World' First 4-Sensor ATO
Low water level optical sensor
Two sensor dual-stage overfill alarm w/QST programming
One sensor for run-dry protection
Versatile & easy plug-and-play installation
Super precise water level control
No programming or adjustments required
Works in complete darkness
Power Input: 120V AC, 60Hz
DC Pump Max Head - 6.5 feet
Flow Rate - 74GPH
Max Mounting/Tank Thickness - 0.50"
Controller Dimensions - 2.2" H x .88" W x 1.9" L
Sensor Cable Length - 10 feet
Pump Cable Length - 69 inches
Solenoid Valve Power Consumption: 6 W @ 12V DC
Solenoid Cable Length: 4ft
AC Switch Max Load:10 A / 1,200 W @ 120V AC
AC Switch Cable Length: 115 inches
Power Supply Cable Length: 67 inches
Ultimate ATO Controller Module+ Mounting Bracket
2x Dual-Optical Sensors w/magnetic housing
AC Socket Switch
RO Solenoid Valve
7 ft Water Tubing
Great product. Highly recommend! By Mike on 3/11/2019Mike would recommend this product to a friendTried the Tunze and had problems with the sensor. Ended up purchasing the Ultimate ATO system, and am impressed with the accuracy and dependability of it. Would highly recommend it. There are a number of wires, which are attached to the control unit on the top AND bottom, which makes the controller a bit bulky and not as neat looking as I would have liked, if mounting it to the outside of the tank stand. Would have been nice for all the wires to come out of the bottom, so you could tuck the wires neatly from the control unit. Also, the holder that the control unit sits in, could be a bit more secure at holding the controller in place, but still does it's job as long as you don't bump the wires attached to the control unit. All in all, though, a great ATO system! Would highly recommend it!