Use the Water Valve from Tunze to connect to the Tunze Osmolator - the water valve replaces the pump with an electrically operated solenoid. Use it to control the flow of water from a tube rather than pumping it from a container like gravity-fed auto top off system.
Max Water Pressure - 145 PSI (10 bar)
Item #: 8555.200
| UPC | 4025167907067 |
|---|
Write Your Own Review
Product Questions
Can I order an Osmolator with this solenoid, or do I have to order the Osmolator with the pump and then pay separately for this solenoid?
Question by: Doug on Jan 18, 2017, 12:49 PM
Great question! Unfortunately, they are not sold as a combo unit and you would have to purchase both products. Thanks!
Answer by: Randy on Jan 20, 2017, 7:58 AM
Is it possible to run two of these off the same Osmolator? My thought here is that my sump is going to cost me around $900 and I'm quite worried about drilling a hole in it for a float valve as a secondary shutoff. But if I could run two of these... even if one failed in the on position the second should run properly and stop flow.
Is this a sound plan?
Thanks,
Brian
Is this a sound plan?
Thanks,
Brian
Question by: Brian Serafini on Apr 5, 2016, 8:51 AM
Great question!
These will not be able to run 2 on 1 osmolator. the voltage would vary for each causing them to not function. individual controller will be required for each water valve. Feel free to let us know if you have any further questions!
These will not be able to run 2 on 1 osmolator. the voltage would vary for each causing them to not function. individual controller will be required for each water valve. Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 8, 2016, 2:47 PM
Does this solenoid just use 110v power? Can I use it with a timer plugged into a wall outlet or would I need to buy the tunze controller also? Thanks
Question by: Chad on Jan 21, 2016, 1:19 PM
Great question,
This solenoid is connected directly to the Tunze Osmolator controller and does not have a rating on what voltage would work. Feel free to let us know if you have any further questions!
This solenoid is connected directly to the Tunze Osmolator controller and does not have a rating on what voltage would work. Feel free to let us know if you have any further questions!
Answer by: Connor on Jan 27, 2016, 7:34 PM
Will the Tunze water valve work with the Tunze Osmolator Nano 3152?
Question by: Caleb on Jun 8, 2014, 1:43 PM
Hi Caleb,
Unfortunately the Osmolator accessories (switch socket, water valve, etc) are only made to work with the Osmolator 3155.
Unfortunately the Osmolator accessories (switch socket, water valve, etc) are only made to work with the Osmolator 3155.
Answer by: Bulk Reef Supply on Jun 8, 2014, 1:43 PM
When the power fails, does this valve close?
Question by: Mike on Jan 20, 2014, 8:07 AM
Hi Mike,
This is a normally closed valve, so unless it is being powered then the valve is closed.
This is a normally closed valve, so unless it is being powered then the valve is closed.
Answer by: Bulk Reef Supply on Jan 20, 2014, 8:07 AM
Login and Registration Form