We carry a wide variety of reverse osmosis canisters, and depending on your system or reactor we most likely have the canister to fit your needs. The most common RODI systems along with the BRS systems use the 10" Canister with 1/4" ports. The standard and dual BRS Reactors use the same 10" canister but with 1/2" ports, and deluxe reactors use the 10" canister with 1/2" ports.
Sizes Available:
- 5" x 2.5" Reverse Osmosis Canister with 1/2” Ports (BRS mini reactor canister)
- 10" x 2.5" Reverse Osmosis Canister with 1/4" NPT Ports (typical replacement RO canister)
- 10" x 2.5" Reverse Osmosis Canister with 1/2” NPT Ports (BRS carbon & GFO canister)
- 10" x 2.5" Reverse Osmosis Deluxe Canister with 1/2” Push Connect Ports (BRS deluxe carbon & GFO canister)
- 20“ x 2.5" Reverse Osmosis Canister with 3/8” NPT Ports
- 20" x 2.5" Reverse Osmosis Canister with 1" Ports
Note: Fittings are not included. Canisters with pressure relief ports may have a red or green button and may vary from canister to canister.
| Product Name | Reverse Osmosis and Reactor Canisters - Bulk Reef Supply |
|---|---|
| SKU | Reverse Osmosis Canisters |
| Filter Dimensions | 10 in. x 2.5 in. (Standard), 10 in. x 4 in., 20 in. x 2.5 in., 20 in. x 4 in. |
Write Your Own Review
Product Questions
For the 5" x 2.5" Reverse Osmosis Canister 1/2" Ports - SKU: 208444 the name says it has 1/2" ports, but under the 'Details' below it says this canister has 1/4" ports. Which does it come with?
Question by: Ben on May 25, 2022, 10:46 AM
Hey there,
Thank you for reaching out to us. It has 1/2" ports.
Please let me know if you need anything further and take care!
Thank you for reaching out to us. It has 1/2" ports.
Please let me know if you need anything further and take care!
Answer by: Matt Lucero (BRS Staff) on May 26, 2022, 10:55 AM
Hi I have a brs carbon/gfo reactor and I want to run a 5 micron filter in it. Will the filter fit properly, or does it need to be modified? Also what's the max flow the can be used on it?
Question by: Curtis on May 16, 2022, 9:52 PM
Hey there,
Thank you for reaching out to us. Yes, it will fit without modification and its max flow is .5 GPM.
Please let me know if you need anything further and take care!
Thank you for reaching out to us. Yes, it will fit without modification and its max flow is .5 GPM.
Please let me know if you need anything further and take care!
Answer by: Matt Lucero (BRS Staff) on May 17, 2022, 7:57 AM
Hi, I want buy the 20” canister to add in my 5 stages ro/di system, my question is: Need i buy any adapter ? Because my tubing line is 1/4” and this 20” canister have 3/4” port line. How can i fit my 1/4” line in this port ?
Question by: Iury Zardo on Sep 9, 2020, 1:27 AM
Hey there,
Thank you for reaching out to us! YOu will want a 3/4 x1/4" reducing bushing and then a 1/4" NPT fitting.
https://www.bulkreefsupply.com/bres-schedule-80-reducing-bushing-thread.html
https://www.bulkreefsupply.com/mur-lok-male-npt-x-push-connect.html
Please let me know if you need anything further and take care!
Thank you for reaching out to us! YOu will want a 3/4 x1/4" reducing bushing and then a 1/4" NPT fitting.
https://www.bulkreefsupply.com/bres-schedule-80-reducing-bushing-thread.html
https://www.bulkreefsupply.com/mur-lok-male-npt-x-push-connect.html
Please let me know if you need anything further and take care!
Answer by: Matt Lucero on Sep 9, 2020, 2:12 PM
Will the 20 inch canister with 3/4 ports be clear? Also if I use for di resin how much will it hold with appropriate canister installed?
Question by: Shaun garfinkel on Mar 14, 2018, 3:50 PM
Hi there,
Thank you for reaching out.
The 20 inch Canister with 3/4" ports would be a clear canister with a black top. The volume of the cartridge that fits the canister is 109 cubic inches or about 7.55 cups.
It is the 2.5" x 20" canister found here:
https://www.bulkreefsupply.com/clear-refillable-cartridge-for-di-resin.html
Please let us know if you have any other questions.
Have a great day!
Thank you for reaching out.
The 20 inch Canister with 3/4" ports would be a clear canister with a black top. The volume of the cartridge that fits the canister is 109 cubic inches or about 7.55 cups.
It is the 2.5" x 20" canister found here:
https://www.bulkreefsupply.com/clear-refillable-cartridge-for-di-resin.html
Please let us know if you have any other questions.
Have a great day!
Answer by: William Glenn on Mar 16, 2018, 3:21 PM
I am buying two 10 inch 1/4 inch canisters and am going to mount them to a one of your brackets. Do I need screws or bolts to mount to the bracket, and what sort of fitting do I need to hook 1/4 inch line to the canisters?
Question by: DARIN HIGGINBOTHAM on Nov 5, 2017, 12:13 AM
You will need four screws per canister and I have a link below to the proper screws. When it comes to the fittings, you have two options, a staright connection or an elbow. You will just want to make sure that you 1/4" NPT threads on one side and then 1/4" push connect fitting on the other side.
Screws https://www.bulkreefsupply.com/reverse-osmosis-screws-bolt.html
Elbow Fittings https://www.bulkreefsupply.com/mur-lok-ro-elbow-male-npt-x-push-connect.html
Straight Fittings https://www.bulkreefsupply.com/mur-lok-male-npt-x-push-connect.html
Screws https://www.bulkreefsupply.com/reverse-osmosis-screws-bolt.html
Elbow Fittings https://www.bulkreefsupply.com/mur-lok-ro-elbow-male-npt-x-push-connect.html
Straight Fittings https://www.bulkreefsupply.com/mur-lok-male-npt-x-push-connect.html
Answer by: Charlie on Nov 26, 2017, 8:43 AM
Which of the clear refillable media cartridges would fit the 20" Reverse Osmosis Canister 3?4" Ports
SKU: 200100?
SKU: 200100?
Question by: Alan on Sep 6, 2017, 6:06 PM
Hey there,
Thanks for getting in touch with us in regards to this canister replacement. The SKU:200100 that you gave me would be the correct one. Please let me know if there is anything else that we can assist with. Thanks!
Thanks for getting in touch with us in regards to this canister replacement. The SKU:200100 that you gave me would be the correct one. Please let me know if there is anything else that we can assist with. Thanks!
Answer by: Tyler Schafer on Sep 24, 2017, 1:32 PM
I have some leaks I'm attempting to fix. When I purchase the ports I am in fact purchasing the lid of the canister, correct?
Question by: Jeremy Luke on Jun 9, 2017, 12:44 PM
The canisters for sale include the lid and lower clear canister assembly.
Have a great day!
Have a great day!
Answer by: Zack on Jun 13, 2017, 11:39 PM
What are these rated at for pressure?
Question by: Chris Hall on May 16, 2017, 11:43 AM
The clear canister portion is made of Styrene Acrylonitrile and these housings are normally rated for safe operation up to 90psi.
Have a great day!
Have a great day!
Answer by: Zack Wilson on May 17, 2017, 4:50 PM
Hi! I have a BRS 5 STAGE PLUS RO/DI SYSTEM - 75GPD. I need to replace 2 of the canisters. Which one of the above do I need?
Question by: Kristin Courtney on Apr 12, 2016, 6:22 PM
Great question!
I have included the correct unit below. Feel free to let us know if you have any further questions!
10" Reverse Osmosis Canister 1?4" Ports
SKU: 200001
I have included the correct unit below. Feel free to let us know if you have any further questions!
10" Reverse Osmosis Canister 1?4" Ports
SKU: 200001
Answer by: Connor on Apr 18, 2016, 6:21 PM
Hello, my question is about the 10" Reverse Osmosis Canister, what color is it, I'm looking for a clear housing to replace an old one that is cracked.
Question by: Adrian on Mar 6, 2016, 10:26 AM
Great question!
The 1/4" port canister will be a slightly blue tint to which matches our RO systems. The 1/2" port will come in a clear plaster version designed for our reactors. Feel free to let us know if you have any further questions!
The 1/4" port canister will be a slightly blue tint to which matches our RO systems. The 1/2" port will come in a clear plaster version designed for our reactors. Feel free to let us know if you have any further questions!
Answer by: Connor on Mar 9, 2016, 4:44 PM
I have a Coralife Pure-Flo II RO Unit and the canister just broke, will these 10 in canisters fit that unit? I have a extra canisters but they don't fit, the threads don't line up so i am curious about these
Question by: michael on Aug 26, 2014, 4:02 AM
Hi Micheal,
I would have to assume that these canisters will not directly replace the canisters on your current RO unit. You should be able to unscrew the entire canister assembly from the bracket and install the new canister with lid. You should be able to reuse the fittings as long at they are 1/4" NPT threads.
This is the canister you will need to replace your broken one.
10" Reverse Osmosis Canister 1?4" Ports SKU: 200001
I hope this helps!
Have a great day :)
I would have to assume that these canisters will not directly replace the canisters on your current RO unit. You should be able to unscrew the entire canister assembly from the bracket and install the new canister with lid. You should be able to reuse the fittings as long at they are 1/4" NPT threads.
This is the canister you will need to replace your broken one.
10" Reverse Osmosis Canister 1?4" Ports SKU: 200001
I hope this helps!
Have a great day :)
Answer by: Bulk Reef Supply on Aug 26, 2014, 4:02 AM
do you guys sell the wrench for the big blue10" filter?
Question by: chris on Jul 28, 2014, 9:22 AM
Hey Chris,
We sure do. You can find them right here:
https://www.bulkreefsupply.com/wrench-for-reverse-osmosis-canister.html
We sure do. You can find them right here:
https://www.bulkreefsupply.com/wrench-for-reverse-osmosis-canister.html
Answer by: Bulk Reef Supply on Jul 28, 2014, 9:22 AM
I have a 4 stage BRS RODI system and I would like to add another carbon filter, what parts do I need for me to do this?
Question by: JohnM on May 7, 2014, 6:01 AM
Hi John,
The simplest thing to do would be to convert your 4 stage RO/DI system into a 4 stage only system by rerouting the existing tubes (and removing the DI cartridge and replacing it with the second carbon) so that water travels through all 3 cartridges and then to the RO membrane. Then simply add on the "single DI" to add the DI stage back in. This way it comes out cheaper then purchasing all the parts individually and its a lot less work.
https://www.bulkreefsupply.com/single-deionization-canister.html
The simplest thing to do would be to convert your 4 stage RO/DI system into a 4 stage only system by rerouting the existing tubes (and removing the DI cartridge and replacing it with the second carbon) so that water travels through all 3 cartridges and then to the RO membrane. Then simply add on the "single DI" to add the DI stage back in. This way it comes out cheaper then purchasing all the parts individually and its a lot less work.
https://www.bulkreefsupply.com/single-deionization-canister.html
Answer by: Bulk Reef Supply on May 7, 2014, 6:01 AM
I have a BRS 5 stage (now converted into 6 stages) RO/DI, can the 20" canisters be screwed onto the 10" tops, and will it operate correctly with the 1/4 plumbing as I see the 20" canister tops have 3/4" in/out?
Question by: Gil on Mar 19, 2014, 7:01 AM
Hi Gil,
Unfortunately its not that easy :-) The entire canister (top and bottom) will need to be swapped out as the the bottoms won't thread onto the tops for the smaller sizes.
Unfortunately its not that easy :-) The entire canister (top and bottom) will need to be swapped out as the the bottoms won't thread onto the tops for the smaller sizes.
Answer by: Bulk Reef Supply on Mar 19, 2014, 7:01 AM
BRS 5 Stage PLUS RO/DI System - 75GPD
I need the canister size for this unit please they cracked.
I need the canister size for this unit please they cracked.
Question by: Amber on Jan 15, 2014, 12:43 PM
Hi Amber,
The 10" canister with 1/4" ports is the one we use with our RO/DI units.
The 10" canister with 1/4" ports is the one we use with our RO/DI units.
Answer by: Bulk Reef Supply on Jan 15, 2014, 12:43 PM
I'm looking for a replacement canister for a Pure Flo II RODI unit that cracked. Which canister would fit the unit?
Question by: Scott on Dec 31, 2013, 6:41 AM
HI Scott,
Most likely the canister you are trying to replace is a 10" canister with 1/4" ports. That said though, different canister manufacturers have different thickness brackets, canister tops, etc so while it will hold the cartridge and the plumbing should connect just fine, it may not work to put it on the same bracket.
Most likely the canister you are trying to replace is a 10" canister with 1/4" ports. That said though, different canister manufacturers have different thickness brackets, canister tops, etc so while it will hold the cartridge and the plumbing should connect just fine, it may not work to put it on the same bracket.
Answer by: Bulk Reef Supply on Dec 31, 2013, 6:41 AM
Does it come with the screws to mount to the brackets?
I ordered the bracket, does it come with bracket?
If not, please advise?
I ordered the bracket, does it come with bracket?
If not, please advise?
Question by: justin on Oct 21, 2013, 7:42 AM
Hi Justin,
It does not come with screws or brackets. Those can be purchased either at the hardware store or here at the link below:
https://www.bulkreefsupply.com/reverse-osmosis-screws-bolt.html
It does not come with screws or brackets. Those can be purchased either at the hardware store or here at the link below:
https://www.bulkreefsupply.com/reverse-osmosis-screws-bolt.html
Answer by: Bulk Reef Supply on Oct 21, 2013, 7:42 AM
I have a kent Maxxima system with three canisters and want to add a fourth (sediment-5micron-1 or 0.6 micron-RO-resin). I am ordering a 1/4"/10inch cartridge; what else do I need?
Question by: Brian on Sep 7, 2013, 5:38 AM
Hey Brian,
Assuming that you are just putting this separate canister on its own bracket separate from the rest of the unit, your going to want a pair of fittings of 1/4" NPT x 1/4" push connect fittings (straight, elbow, whatever your preference). Assuming you want to mount it to the wall or something you would also want to pick up a bracket as well. Don't forget the filter you plan to put in it as well!
Bracket
https://www.bulkreefsupply.com/single-deluxe-bracket-for-standard-10-and-20-canisters.html
Straight NPT x Push Connect:
https://www.bulkreefsupply.com/mur-lok-male-npt-x-push-connect.html
Assuming that you are just putting this separate canister on its own bracket separate from the rest of the unit, your going to want a pair of fittings of 1/4" NPT x 1/4" push connect fittings (straight, elbow, whatever your preference). Assuming you want to mount it to the wall or something you would also want to pick up a bracket as well. Don't forget the filter you plan to put in it as well!
Bracket
https://www.bulkreefsupply.com/single-deluxe-bracket-for-standard-10-and-20-canisters.html
Straight NPT x Push Connect:
https://www.bulkreefsupply.com/mur-lok-male-npt-x-push-connect.html
Answer by: Bulk Reef Supply on Sep 7, 2013, 5:38 AM