Keep salinity and your aquariums water level consistent with Reef Breeders low profile Prism-ATO. Water level changes are registered in fractions of a second using infrared level sensors and with all internal components built into the sensor, there are no additional controllers to mount. Reef Breeders Prism is designed to work with aquariums of all sizes, from pico desktops and All-in-One aquariums with limited space to large reef tanks with full sumps. Its small platform allows it to be installed unobtrusively almost anywhere!
Three built-in infrared sensors
- Low Level: If water drops below this point, the pump will be activated until the water hits the next sensor.
- Fill Level: 1" above the low-level sensor, this sensor turns the fill pump off when it detects water.
- High Level: 1" above the fill level, and 2" above the low-level sensor, this sensor deactivates the pump when it senses water.
Specifications:
- Power Input - 120V AC, 60Hz
- DC Pump Max Head - 8 feet
- Max Mounting/Tank Thickness - 0.50"
- Internal Dimensions - 3"L x 1"W x 1.25"H
- External Dimensions - 1.25"L" x 1"W
- Warranty - 12 Months
- Water Level Detection - Infrared
- Tubing Diameter: 5/8" OD | 1/4" ID
- Tubing Length: 5 ft
What's Included?
1x Sensor
60" Tubing
1x Power Supply
1x Pump
1x Tubing Holder
| UPC | 641926077174 |
|---|---|
| Dimensions | (Sensor) 3"L x 1" Diameter, (Pump) 1.25"L" x 1"W |
| Max Tank Thickness | 1/2 in. |
| Included Mounting | Magnetic, Hang On/Bracket |
| Control Type | Preset Plug & Play (No Controls) |
| Pump Included | Yes |
| Tubing Inside Diameter | 1/4 in. (0.25" / 6.35mm) |
| Warranty | 1 Year |
| Water Level Detection | Infrared Sensor |
| Max Head Height | 5 -10 Feet |
Write Your Own Review
Product Questions
Hello, I was wondering what size tubing is used with the pump?
Question by: Wesley Forbes II on Mar 23, 2023, 5:50 PM
Hi there,
60" tubing is used with this pump.
Happy Reefing!
60" tubing is used with this pump.
Happy Reefing!
Answer by: Grace Knowles (BRS Staff) on Apr 7, 2023, 10:11 AM
what is the fill lvl from tank rim 1" or 2"?
Question by: robert on Feb 7, 2023, 5:12 PM
Three built-in infrared sensors
Low Level: If water drops below this point, the pump will be activated until the water hits the next sensor.
Fill Level: 1" above the low-level sensor, this sensor turns the fill pump off when it detects water.
High Level: 1" above the fill level, and 2" above the low-level sensor, this sensor deactivates the pump when it senses water.
Low Level: If water drops below this point, the pump will be activated until the water hits the next sensor.
Fill Level: 1" above the low-level sensor, this sensor turns the fill pump off when it detects water.
High Level: 1" above the fill level, and 2" above the low-level sensor, this sensor deactivates the pump when it senses water.
Answer by: James Johnson (BRS Staff) on Feb 27, 2023, 4:58 PM
Would you recommend this for the DeskMate 4.8 gal tank?
Question by: Aaron Motsinger on Dec 4, 2022, 5:42 PM
Hey there,
Yes that ato would be perfect for that tank. Thanks!
Yes that ato would be perfect for that tank. Thanks!
Answer by: Codey on Dec 15, 2022, 11:30 AM
What are the dimensions of the pump?
Question by: Rob pate on Nov 22, 2022, 7:03 PM
Thanks for the question! External Dimensions - 1.25"L" x 1"W
Answer by: James Johnson (BRS Staff) on Nov 26, 2022, 11:56 AM
I see a controller. Is the pump included?
Question by: Larry Williams on Jan 31, 2022, 2:56 PM
This ATO does include a pump
Answer by: Matt Lucero (BRS Staff) on Feb 2, 2022, 1:18 PM
Login and Registration Form