- Smart Level Security - AutoAqua
Prevent overflows or equipment from running dry!
Using a tiny optical sensor, AutoAqua's Smart Level Sensor will cut power to the outlet when the sensor detects a change in water level. The plug & play design requires no difficult programming and the magnetic attachment makes placement and adjustments of the level sensor quick and easy. The Smart Level can be used as either a high-level sensor or a low-level sensor. Storing the state of the sensor when the unit is initially energized when the state changes the outlet will turn off preventing catastrophe.
- Use as High or Low Level
- Peace of mind
- No Moving Parts
- Plug & Play
- Magnetic Attachment
- Easy to Clean Sensor
- Auto Time Delay
- 10-Foot Cable
Max Power Output - 1100W @ 110VAC
Max Mounting Thickness - 1/2"
Power On Delay - 10 Seconds
Detection Delay - 5 Minutes
1x Smart Level Security Sensor & Outlet
Ok but emits high frequency sound By Karl on 5/4/2020Karl wouldn't recommend this product to a friendIt works pefect for what i needed it for. I tested it and it turned off the pump when it was supposed to. However my tank is in my bedroom and for some reason it gives off a very high pitch sound that gives me headaches. In a living room or with a loud tank you may not even hear it but it drives me crazy since my tank is very quiet. I will be looking for another brand to replace it.
Wasted Money By Wilfredo on 2/14/2020Wilfredo wouldn't recommend this product to a friendNever worked right for my skimmer. Took it off the system
BEST FOR COLLECTION CONTAINER By Andrew on 8/10/2019Andrew would recommend this product to a friendI am ordering mine today, but based off the reviews and how it works, this is most definetly a "RIGHT TOOL FOR THE RIGHT JOB" situation. This is ideal for adding to a skimmer/skimmate drainline collection container, Especially if you plug it in to a on/off switch board. Alerts you on the less frequent occasion when the container is full and shuts off your skimmer, then simply switch off the power to stop the alarm, empty it and switch your power back on to reset.
Works as it should! By Ryan on 8/8/2019Ryan would recommend this product to a friendI use this as a high level shut for my AWC setup. If for some reason the AWC doesnt shut off as it should this will kill power to the whole setup so I dont end up with a mess of the floor.
Pretty much pointless By RICHARD on 3/14/2019RICHARD wouldn't recommend this product to a friendYes, it gives an audible alarm, but does not turn back on once the level issue has been resolved. If using for a skimmer during feed mode, it will shut off when the water level rises in the sump, but does not turn back on once the level goes back down. You have to unplug it and plug it back in to get it working again. To me, this is pointless.
False reads By Angrytang on 8/29/2018Angrytang wouldn't recommend this product to a friendEven a tiny bit of foam will cause it to shut off. A sparkling clean cup with its first bit of foam and it’s rendered worthless.
Good, but has annoying beep By John on 6/26/2018John would recommend this product to a friendSuper simple and easy to install. I have it in my sump. That said, it beeps when activated (water level raises above sensor) which is very annoying because it does stop.
Smart and Easy By Scott on 6/12/2018Scott would recommend this product to a friendIt is so nice just to plug something in and it works, simplicity! Well made with great quality. Anything is worth it to protect from an overflow or running your return pump dry. I just ordered one for my skimmer. I love tech especially when you just pug and play. Great product!
Does it auto reset? What if I’m not home?
In the event or either a high or low water level triggering this unit it will need to be power cycled to reset it. While this is not ideal does make the unit that much safer in regards to the purpose it is meant to serve which is avoiding flooding or failure of a pump from running dry.
Since the water level at the time the unit is plugged in will dictate whether or not it triggers at a low water or high water state you will want some way of determining whether or not the issue has corrected before power cycling the unit.
I hope this helps! Please feel free to reach out with any other questions.
Based on Autoaqua site the smart level security will disconnect power immediately but you said below it will shut power off after 5min? Which is it?
Why Choose Smart Level Security ?
Smart Level Security comes with a super tiny penny-sized optical sensor. Featured with Plug and Play smart design, Smart Level Security automatically detects the water level status when mounted. Magnetically-coupled sensor makes it easy to adjust to the desired level to secure your aquarium. Maintenance is also as simple as you can imagine. It is able to prevent your aquarium from overflowing or equipment running dry. When the level status changes, Smart Level Security will shut down the equipment immediately. Auto time delay function prevents false alarm due to power outages.
There will be a 5 min delay until the unit loses power.
5 Minute Detection Delay - does this mean it will continue to power the outlet (and whatever is plugged into it) for 5 minutes after it detects a change in level. So, if it used as a high level detector and detects high water level it will let the pump run for 5 minutes instead of shutting the power of upon detection?
It means that once the sensor trips power will still run for 5 minutes. We like to use them in skimmer collection cups.