Core7 Base Elements 1000mL Set - Triton Method
Earn 52 Reward Points$52.00
Ultra-Pure Balanced Solutions for the Triton Method
Reformulated and super-concentrate version of the Base Elements Additives.
1000mL Kits Include:
Core7 Base Elements 1
Core7 Base Elements 2
Core7 Base Elements 3A
Core7 Base Elements 3B
Triton Core7 Base Elements is an ionically balanced, super concentrated dosing system for reef aquariums of all kinds and have been specifically developed for the Triton Method of reefing. The Triton Method utilizes accurate ICP-OES testing to analyze what elements are in your tank and their concentrations along with specific filtration requirements like sumps and large refugium. With ICP-OES testing Triton has been able to monitor what elements are consumed during coral growth and metabolic functions. Taking that data they have developed their ultra-pure line of Core7 Base Elements, that include all major and minor trace elements that your corals are going to need.
Core7 Base Elements comes in two different sizes, 1000mL cartons, which is the perfect size for nano tanks, or if you are just starting the Triton Method. Then they also have the 10L kit and is ideal for larger systems and comes in 10L jugs.
Mixing Core7 Base Elements:
Solution 1 - Transfer contents into a 1L dosing container and it is ready to go!
Solution 2 - Transfer contents into a 1L dosing container and it is ready to go!
Solution 3A - Add 0.5 Liters of RODI water to a 1L dosing container. Add the contents of 3A and top off the container with RODI water.
Solution 3B - Add 0.5 Liters of RODI water to a 1L dosing container. Add the contents of 3B and top off the container with RODI water.
Dosing Core7 Base Elements
We highly suggest using Triton ICP-OES testing to establish a baseline, and for dosing recommendations. Prior to dosing your aquarium's alkalinity should be adjusted to 8 dKH. As a baseline starting dose, Triton recommends 2mL of each component every day per 26 gallons of system water volume. Alkalinity testing should be done on a daily basis for the first couple weeks so that consumption can be adjusted for accordingly. It is recommended not to exceed 2mL per 26 gallons of system water volume per dose, and if more solution is required then multiple doses per day can be administered.
- Core7 Base Elements uses a 1:1 ratio - for every 1mL of Part 1 you use, you should be using 1mL of Part 2, Part 3A, & Part 3B.
- Periodic testing with Triton Labs is highly encouraged to help fine tune your water chemistry.
- Dosing in smaller tanks can be done by diluting each bottle with RO/DI water but we do recommend using the standard Base Elements Additives since they are diluted and easier to distribute to smaller aquariums.
Use with Dosing Pumps
It is highly recommended to use an accurate dosing pump. Due to the super concentrated nature of the elements, it is required to dose into a high flow area of the sump ideally right before the refugium or display tank with a minimum of 5-minute intervals between solutions being dosed. It is also recommended to not dose more than 2mL per 26 gallons of water volume in a single dose.
Want to learn more about the Triton System?
A Guide to the Triton Method - This guide was made to give you the necessary information on how to use the Triton Method.
Triton Method Beginners Guide - A high-level overview of what the Triton system is and how to implement it.
The Triton Method Full Guide - The full guide for how to set up an aquarium system for the Triton Method with the science and principles behind it.
The Unofficial Triton Method For Dummies - A guide by hobbyist focused on simplifying the Triton Method
|Product Name||Core7 Base Elements 1000mL Set - Triton Method|
|Short name for grouped product||1000mL Core7 Base Elements|