Triton CO3 is a concentrated alkalinity solution that is designed to increase your aquarium's alkalinity level without increasing the demand for the Triton Base Elementz. Some reef tanks may need a boost in alkalinity because their calcium and magnesium levels are too high already but the alkalinity level is still below 8dKH. We highly suggest keeping a bottle of Triton CO3 on hand for periodic boosts in alkalinity.
Instructions: 100mL will increase 25 gal of water by 3dKH.
Shake well before use. Measure out the desired amount of Triton CO3 and slowly add the solution to a high flow area of your aquarium. Adding the solution too fast may cause it to precipitate out of solution. It is also very important to monitor the pH of the aquarium when CO3 is being added.
We do not recommend raising your alkalinity more than 1.4dKH per day.
Want to learn more about the Triton System?
A Guide to the Triton Method - This guide was made to give you the necessary information on how to use the Triton Method.
Triton Method Beginners Guide - A high-level overview of what the Triton system is and how to implement it.
The Triton Method Full Guide - The full guide for how to set up an aquarium system for the Triton Method with the science and principles behind it.
The Unofficial Triton Method For Dummies - A guide by hobbyist focused on simplifying the Triton Method
The Triton System is based on accurate ICP-OES Testing that tells you exactly how much of any element may be in your aquarium allowing you to keep a healthy, sustainable reef ecosystem. Using the Triton method relies on keeping your reef tank as stable as possible while mimicking natural sea water conditions by following three simple steps;
- Test - Just sign up on triton-lab.de and create your own aquarium profile. After purchasing a test kit, register the barcode number to your tanks profile, fill the sample tube, and send it in.
- Review - After the test is complete log-in to your tanks profile and review the concentrations compared to Triton's recommended set points.
- Fix - Any issues in the report will be Red indicating a problem. By clicking on the Help and Dose tabs, they will advise how to correct the problem along with the solution and volume needed to be dosed.