- Abyzz to Apex Interface Cable - Abyzz
Connect your Abyzz pump through the 0-10VDC variable speed ports with Apex Controllers. Coupling the Abyzz pump with an Apex Controller you can use Apex Fusion to do all your programming for 24-hour cycles, enable feed modes, and apply warnings and alarms.
- Serial to RJ45
- 0% - 100% speed control
- Simple secure connections
Connecting the Abyzz to Apex Interface cable is very simply. All that is required is an open variable speed port on an Apex System or expansion module. The RJ45 connector will plug directly into the variable speed port on the Apex system and then the serial port should be connected to the master socket of the Abyzz pump driver.
Rated Input -1w max
Operating Volatage - 5VDC
RJ45 to Serial Cable Length - 60 inches
Serial to Serial Extension Cable Length - 72 inches
1x Serial to RJ45 Cable
1x Serial to Serial Extension Cable
Note: Depending on your model of pump, a driver software update may be required. In this rare instance Abyzz is more than happy to assist with the upgrade.
Absolutely Brilliant product By Evan on 7/5/2018Evan would recommend this product to a friendThis may look like a $.50 VGA cable and a VGA over Ethernet cable that you could pick up on amazon for $5.99 but this one is special it deserves the $180 because of the sticker on the back that says Abyzz.
There are no videos related to this product.