- 2.0 Torq Modular Media Reactor Body - Nyos
Modular Media Reactors | Fast Media Changes
Nyos Torq Modular Media Reactors are revolutionizing the world of media reactors. With a removable body that can be exchanged from the dock within a second, you no longer need to get your hands wet during media changes. The reactor body can be inserted into the Nyos Torq Dock and then twisted to adjust the flow rate through the reactor. The Torq Reactor system does not need any screws, pumps, or tubing, just the body and the dock is all that is required for a potent and easy to use media reactor.
- Great for Carbon or GFO
- Installs on Dock in Seconds
- Controllable Flow Rate
- Stylish and Functional
- Dual Media Separation Plate
Torq Dock required for use
2.0 Torq Body Specifications:
Max Media Volume - 2000mL
Body and Dock Dimensions - 6.4" L x 6.4" W x 21" H
Body Height - 17"
Body Diameter - 4"
The Nyos Torq Media Reactor System is an innovative high-performance system reactor in a modular design for all types of filter media, such as active carbon, phosphate remover (GFO), zeolite and bio pellets.
Filter media are an essential part of maintaining good water quality in an aquarium. They help remove excess pollutants and raise water quality. Often media are simply placed in filter bags, this leads to channeling where all the media does not come into contact with the water. Leaving its full capacity unused.
Nyos has developed the innovative Torq system reactor as a simple and elegant solution to the problem of aquarium filtration. The Torq produces an even water flow throughout the chamber giving ideal conditions for any choice of filter media.
The Nyos TORQ is an innovative system reactor for all types of filter media. The Torq Dock is equipped with an integrated pump and constitutes the base unit. The Dock is equipped with a universal connector, which allows Torq reactor bodies of all available sizes to be inserted.
With the Nyos Torq, they have deliberately avoided screws, hoses, and valves. Allowing, filter media to be changed in seconds with ease and free of frustration.
The required pump is already included in the Torq Dock. Simply place the body with the medium on the Dock and insert. Done.
One reactor, two media - In the Torq bodies 1.0 and 2.0, it is possible to use two different filter media at the same time by inserting a chamber separator.
By turning the cap it is possible to seamlessly adjust and precisely control the flow with a hand, without reaching into the water. The sophisticated controllability means the flow speed can be optimally set to the type and amount needed by the respective filter medium.
1x Nyos 2.0 Torq Body
Note: Nyos Torq Dock required for use
equipment By jose on 5/1/2020jose wouldn't recommend this product to a frienddo not buy!!!!!!!! i repeat do not buy!!!!!!!!!!!!!!!!! garbage hard to adjust the flow media spilled over inside the sump took me days to get all the carbon and gfo out even my skimmer had media in it had to take it apart save your money brs dual reactor is better than this
Choose your media carefully. By Peter on 1/7/2020Peter wouldn't recommend this product to a friendBeware of using small media in this reactor. I used BRS ROX 0.8 in it at first and the media got through both sponges and pushed the top o-ring off at half flow causing my sump to be flooded with carbon. I now run it in a media bag inside the reactor. This would probably work well for extremely large grain sized media but be warned that the top o-ring seal is not that strong and even on low flow pops off for no reason on occasion.
Horrible Design By Steven on 11/21/2019Steven wouldn't recommend this product to a friendIt’s pretty but the design doesn’t work. Unfortunately I bought without looking at reviews on R2R which day the same thing.
It just doesn’t work. The sponges are too loose to hold media in place and the design causes the carbon to tumble.
I loaded it up with media and the sponges collapsed and all my GFO fell out.