- Reverse Osmosis Tank Shut Off Valve - Bulk Reef Supply
The Reverse Osmosis Tank Shut Off Valve is used to turn off the water supply to your pressure tank. Critical if you ever want to remove the tubing from the pressure tank.
The Tank Shut Off Valve will thread directly onto any standard drinking water pressure tank allowing you to isolate the tank for service, or simply just remove the tubing from the tank without having to fully drain the tank first.
We have two sizes available depending on the RO tubing you need to connect to your pressure tank:
- ¼" RO Tubing Tank Shut Off Valve
- ⅜" RO Tubing Tank Shut Off Valve
Almost all drinking water pressure tanks will have a standard male threaded nipple on the tank which allows water to enter and exit the tank. The RO Tank Shut Off Valve will let you turn the water feed on and off from the pressure tank. By simply screwing onto the pressure tank you now have full control over the flow in and out of the tank. If you do not have this shut off valve you would need to drain all the water out of the tank before unhooking the tubing from the tank which can waste a lot of water.
Most standard RO units will use 1/4" RO tubing however in some rare instances you may need a shut off valve that accommodates 3/8" tubing which we carry as well. Simply just measure the outside diameter of your tubing if you are not sure what size you are working with.
Perfect By JC on 6/16/2016JC would recommend this product to a friendJust what I needed. Best price!
Good valve By Brock on 2/6/2015Brock would recommend this product to a friendAll I can say is that I'm glad that I ordered this valve.
Works Great By ww_big_al on 4/13/2013ww_big_al would recommend this product to a friendNeed a quick shut off valve for my RO tank and these appear to be high quality. I gave it 4 stars instead of 5 because the description is confusing. They are identified a 1/4" inch or 3/8" fittings. They are refer to the ploy tube size. Both have 1/4" FNPT for the RO tank. The descriptions need to ID that fact. I ordered the 1/4" fist but of course they didn't fit me 3/8" tubing.
Perfect replacement! By Oscar on 8/7/2012Oscar would recommend this product to a friendMy old connection to the RO tank had no valve. This is perfect. Very solidly built and works perfectly without any leaks!
Is the thread to the tank 3/4"?
Our RO tanks will connect via 1/4" shut off valves. Feel free to let us know if you have any further questions!
What is on the inlet side of the valve? 1/2 pipe female thread?
The inlet side (Threaded side) accepts 1/4" threaded fittings. Feel free to let us know if you have any further questions!