UPC | 4025167903366 |
---|---|
Dimensions | 3.75" Height x 2" Diameter |
Control Type | Controller Required (Sold Separately) |
Flow Rate | 15 GPH |
Power Type | DC |
Additional Notes | *Designed for use with Tunze Osmolator Controller |
Max Head Height | 5 -10 Feet |
Product Questions
When I look at the dimensions for the pumps under 3155 and 3152 I see a different pump size.
If not, is there a replacement pump available for 3152?
Thank you for reaching out to us! The base is 1 7/8" in diameter.
Please let me know if you need anything further and take care!
This replacement metering pump is compatible with both Tunze Osmolator ATOs. Have a great day!
Link:
https://www.bulkreefsupply.com/tunze-osmolator-nano-3152-auto-top-off.html
I'm afraid that this is the pump only. The tubing supplied is a special, extra thick tubing that Tunze only provides in the ATO units. It does have a standard OD of 1/4" though, and we do carry a number of other 1/4" OD tubing options that would be compatible, such as the DOS tubing and 3/16" ID air line tubing.
https://www.bulkreefsupply.com/500-152m-air-line-tubing.html
https://www.bulkreefsupply.com/3-16-air-line-tubing-sold-by-the-foot.html
Happy reefing!
The Tunze devices are great! I'm afraid in this case the Tunze pump is specifically meant to work with the 9v power supply on the osmolators, and the accessory cable and 1link and PMUP type accessories are designed to run at 24v.
Regards,
the Diameter of the pump is 2"
A small check valve could help in addition to increasing the speed of the pump if possible. You will want to look into adjusting the pump settings to increase the dosage. Feel free to let us know if you have any further questions!
(fresh water discus setup) this unit will be set up in a sump
Great question, The Tunze replacement pump is only currently designed for use with the Osmolator controller. For alternative pumps we recommend looking into standard small return pumps such as the Sicce 1.5 which has a head height of 6' and could just push the water over the side of a 5' tank. Feel free to let us know if you have any further questions!
https://www.bulkreefsupply.com/sicce-syncra-silent-1-5-pump-357-gph.html
The Pump has a varying GPH rating depending on the head height. Its maximum head height is around 8 feet. and it has a GPH rating of up to 15 GPH.
This should work with any of Tunze's ATO systems. The 5017 is just one component of the Osmolator 3155 system so it is a direct replacement to the pump included.
Hope this helps!
Have a great day :)
Its smaller then a pop can. A 6" hole will be no issue at all :-)
Login and Registration Form