Loading...
Triton

Original Base Elements 1000mL Set Method

In stock
Out of stock
SKU
210843
$69.00

$78.00
Discontinued by Bulk Reef Supply
- +

The backbone of the Triton Method

Designed to maintain proper carbonate hardness, calcium, and trace elements in reef aquariums. Base Elements is a balanced 4 part system that helps increase coloration, polyp extension, and overall coral health. Base Elements is intended to be a stand-alone product and not recommend to be used with other two-part dosing systems.

Kit Includes:

1000mL Base Elements 1

1000mL Base Elements 2

1000mL Base Elements 3A

1000mL Base Elements 3B

 

Triton Base Elements is a concentrated system that has been developed for reef tank dosing. The concentrated solutions are diluted by you and create a simple 1:1 dosing system that follows your aquariums alkalinity levels. The system was created to provide an essential macro and trace elements that are consumed by corals and other animals in the reef aquarium. 

 

Mixing Base Elements (required)

Part 1 - This part comes in a granular form and should be mixed with 9.66L of RODI water in a dosing container.

Part 2 - Mix the entire contents of Part 2 with 9L of RODI water in a dosing container. 

Part 3A - Mix the entire contents of Part 3A with 9L of RODI water in a dosing container. 

Part 3B - Mix the entire contents of Part 3B with 9L of RODI water in a dosing container. 

Mixing notes - It is important to create the same dilution of each component. After mixing, keep each component separate and do not further mix parts together. 

If you do not want do any mixing or diluting check out Triton Core7 Base Elements. 

 

Dosing Base Elements

We highly suggest using Triton ICP-OES testing to establish a baseline, and for dosing recommendations. Prior to dosing your aquariums alkalinity should be adjusted to 8 dKH. As a baseline starting dose, Triton recommends 10mL of each component every day per 100L of system volume. Alkalinity testing should be done on a daily basis for the first couple weeks so that consumption can be adjusted for accordingly. 

Base Elements uses a 1:1 ratio - for every 1mL of Part 1 you use, you should be using 1mL of Part 2, Part 3A, & Part 3B.

Periodic testing with Triton Labs is highly encouraged to help fine tune your water chemistry.

 

Want to learn more about the Triton System?

A Guide to the Triton Method - This guide was made to give you the necessary information on how to use the Triton Method. 

Triton Method Beginners Guide - A high-level overview of what the Triton system is and how to implement it. 

The Triton Method Full Guide - The full guide for how to set up an aquarium system for the Triton Method with the science and principles behind it.

The Unofficial Triton Method For Dummies - A guide by hobbyist focused on simplifying the Triton Method

Write Your Own Review
You're reviewing:Original Base Elements 1000mL Set Method
Your Rating
Only registered users can write reviews. Please or

Product Questions

Is the recommended dosage 10ml per 100 liter tank volume after it is diluted?
Question by: Tinus on Nov 20, 2017, 5:23 AM
Yes, you will want to follow the dilution directions, and then proceed to the dosing directions. : )
Answer by: Charlie on Nov 20, 2017, 1:10 PM
Once mixed, is this the same as the triton core7?
Question by: Kevin on Nov 16, 2017, 2:54 PM
The Core7 is slightly different in its chemical makeup, but not enough to make a huge difference.
Answer by: Charlie on Nov 18, 2017, 8:14 PM
After I mix this to make 10 liters, is it then basically the same as the core7?
Question by: Kevin on Nov 8, 2017, 12:50 PM
The Original base elements is almost the same as the Core7 but the formula is slightly different with the newer Core7 Base Elements.
Answer by: Charlie on Nov 26, 2017, 8:49 AM