Expand Your N-Clear M Filtration System
- Requires an N-Clear M Main Unit to Operate (Sold Separately)
- Add One Extension for 60-120 Gallon Systems or Two for 120-180 Gallon Systems
- Fits Most Standard 4-Inch Filter Sock Holders and Select AIO Aquariums
- Adds up to 800 GPH of Filtration Capacity per Extension Unit
- Includes a Connection Cable for Synchronized Operation
Expand your automatic fleece filtration with the Nature Dimensions N-Clear M Extension Unit. Designed for aquariums with multiple filter sock openings or filtration chambers, each Extension Unit adds another motorized fleece roller without requiring a separate controller or sensor. Connect it to your N-Clear M Main Unit, and all linked filters advance fresh fleece together when the Main Unit's sensor triggers.
The Extension Unit cannot operate independently. It requires an N-Clear M Main Unit, sold separately, and does not include a controller, optical sensor, or power adapter. One Main Unit supports up to two Extension Units for a three-filter setup.
N-Clear M drops directly into most standard 4-inch filter sock holders and fits select AIO aquariums with the appropriate mounting adapter. Compatible systems include popular models from Innovative Marine, UNS, Red Sea, and others. Before buying, review the compatibility chart below to select the correct adapter for your tank. N-Clear M Fleece Roller Filter Adapters are sold separately.
Compatibility Chart
| Adapter Part # | Compatible Tank Models |
|---|---|
| No Adapter Needed |
Most sumps with standard 4-inch filter sock holders, including:
*Innovative Marine SR 60 / 80 / 120 AIO aquariums do not require an adapter when the original mounting holder is present. |
| M1012 | Innovative Marine 30 / 40 / 50 AIO. Use the adapter without the two front water blockers. |
Frequently Asked Questions
Can the Extension Unit operate on its own?
No. The Extension Unit must connect to an N-Clear M Main Unit controller. It includes a connection cable but does not include its own controller, optical sensor, or power adapter.
How many Extension Units can I connect?
One N-Clear M Main Unit supports up to two Extension Units. All connected filters operate in Sync mode, advancing together when the Main Unit's sensor triggers.
How long does a roll of fleece last?
Nature Dimensions estimates 3-6 weeks per roll. Actual lifespan depends on your tank size, bioload, flow rate, and sensor height.
How does an automatic fleece roller filter work?
Water passes through a high-density fleece sheet that traps suspended particles. As the fleece becomes clogged, the water level inside the Main Unit rises and triggers all connected filters to advance fresh fleece. The used fleece collects on each filter's take-up roll, removing trapped waste from the water flow.
Why would someone choose a fleece roller over filter socks or pads?
A fleece roller automatically moves dirty filter material out of the water flow, reducing the time trapped waste has to break down. It also cuts down on the frequent cleaning and replacement required with filter socks or pads.
Specifications
- Required Equipment: N-Clear M Main Unit (sold separately)
- Configurations:
- Main + Extension: 60-120 gal (227-454 L); up to 1,600 GPH (6,057 L/h)
- Main + 2 Extensions: 120-180 gal (454-681 L); up to 2,400 GPH (9,085 L/h)
- Flow Capacity per Filter: Up to 800 GPH (3,028 L/h)
- Choosing a Configuration: Choose the number of filters using actual flow, bioload, and the number of active sock openings. All linked motors advance together from the Main Unit's controller and sensor.
- Unused Sock Openings: Cover with an N-Fit 4-inch Sock Opening Cover (sold separately).
- Filter Footprint: 3.55" x 2.9" (90 x 73 mm)
- Height, Excluding Fleece: 15.75" (40 cm)
- Installed Clearance: Approximately 10.6" (27 cm) above the sock plate to the upper roller section, plus room for installation and roll changes
- Chamber Clearance: 4.3" x 4.3" x 7" (109 x 109 x 180 mm) for the supported nonstandard chamber path
- Fleece Roll: 2.4" (61 mm) wide x 82 ft (25 m) long
- Typical Roll Life: 3-6 weeks, depending on bioload, flow, tank size, and sensor height
- Fleece Material: Food-grade material, independently tested to meet U.S. FDA food-contact standards (21 CFR 177.1630)
- Control: Sync mode through the N-Clear M Main Unit's controller and sensor
What's Included?
- N-Clear M Fleece Roller Filter (Extension Unit)
- Motorized Filter Roller
- Connection Cable
- One Fleece Roll
Note: Controller, optical sensor, and power adapter are not included. An N-Clear M Main Unit is required and sold separately.
| SKU | 257507 |
|---|---|
| UPC | 5065025142062 |
| Backorder ETA | 2026-10-23 00:00:00 |
| Dimensions | 3.55" × 2.9" (Footprint), 15.75" (Height, excluding fleece) |
| Aquarium Type | Saltwater, Freshwater |
| Apex Compatible | No |
| Placement | In Sump |
| Filtration Stage | Mechanical |
| WiFi | No |
| Self Priming | No |
| Flow Rate | Main Unit + 1 Extension: up to 1,600 GPH, Main Unit + 2 Extensions: up to 2,400 GPH |
| Power Type | DC |
| Power Cord Length | 5 Feet |
| Warranty | 1-Year Manufacturer Limited Warranty |
| Additional Notes | The Extension Unit cannot operate independently. An N-Clear M Main Unit is required and sold separately. |

















Login and Registration Form