- MightyJet Desktop AIO DC Return Pump (326 GPH) - Innovative Marine
Fits almost all All In One Aquariums!
Innovative Marine MightyJet DC Pumps are perfect for any AIO or in-sump application. Set the perfect flow rate for your tank with the included DC controller. The tiny pump fits into most back compartments of all in one aquarium and is a perfect upgrade from your stock pump. Just put on the proper barbed adapter, drop the pump into the chamber and connect it to the stock tubing. Ultra quiet DC technology allows the pump to flow copious amounts of water while staying whisper quiet making the Innovative Marine MightyJet perfect for any room of the house.
- Small Form Factor
- Ultra-Quiet DC Powered
- Run Dry Protection
- One-Touch Feed Mode
- Includes Barbed Adapters
- Easy To Use Controller
Stream & Sine Modes
Two different preset modes, a constant stream or a pulsing sine wave mode. Each setting gives 9 different flow rates and can be easily seen on the controller's LCD screen along with the power usage. Push the middle button on the controller for a 10-minute feed mode to be enabled, and if you have kids or friends with curious fingers, the settings can be locked to keep your settings from being changed.
Max Flow - 326 GPH
Max Head - 5 FT
Dimensions - 3.7" L x 2.5" W x 3.4" H
Output Size - 1/2", 5/8", 3/4" barbed
Input Size - 1/2", 5/8", 3/4" barbed
Power Consumption - 15w @ 24VDC
1x MightyJet 326 GPH DC Pump
1x MightyJet Controller
1x Power Adapter
2x 1/2" Barbed Adapters
2x 5/8" Barbed Adapters
2x 3/4" Barbed Adapters
Perfect for Nuvo 10 By Tim on 1/29/2019Tim would recommend this product to a friendI installed one of these on a Nuvo 10 in my office. Set at 2.6 it provides enough pulsing flow (along with an RFG) that I don't need an additional powerhead. Very quiet, easy to control; feed mode holds long enough for me to do a quick water change. A big improvement over the stock pump or the Sicce 1.0.
Mighty jet 326 By Ralph on 12/19/2018Ralph would recommend this product to a friendPut this little guy in a biocube and it moves much more water than the pump that came with it , controllable make it even better with the pause mode for feeding
Nice Little Pump, but... By Murlin on 12/9/2018Murlin would recommend this product to a friendMy recommendation to a friend would be "maybe" This is a solid looking pump that looks solid, and installs and works like a charm. One BIG problem:
The wall wart power supply is not safety certified (i.e. UL Listed). I just happened to have a listed power supply from a defunct Jabao wave maker that was UL listed and had the same rating (Output 24 vdc, 1 amp) and worked fine. I can't believe that IM would save a few cents on a power supply that wasn't safety certified. Makes you wonder about other components.
Nice little pump By Patrick on 9/8/2018Patrick would recommend this product to a friendThis pump was placed on my daughter 10 gallon IM nuvo fusion. You have to remove the screen to get it to fit in the back chamber but it runs great. love the feed mode on the controller hook it up to a spin stream and it's great. ( side note it pushes a lot of water which was causing the water to hit the lid brackets and slowly spill over u can solve this by taking some air tubing and cutting pieces to raise the bracket up slightly)
Very impressed By VitoD on 8/22/2018VitoD would recommend this product to a friendFirst product I've purchased from IM. Very nice pump. Well built, quiet and really like the Sine Wave feature. Works great in combo with RFG nozzle in my 20 gallon Red sea Max Nano.