Clear Water

CW-200 Algae Scrubber - Ready-2-Run Bundle - Clear Water (DISCONTINUED)

In stock


Earn 3,245 Reward Points Earn 9,735 Reward Points

1 x CW-200 External Algae Scrubber - Clear Water (DISCONTINUED)   + $0.00
3 x White Soft Silicone Tubing 1/2" ID   + $0.00
1 x 1/2” Two Little Fishies Ball Valve   + $0.00
1 x Syncra Silent 3.0 Pump (714 GPH) - Sicce   + $0.00
1 x Schedule 80 Reducing Bushing 3/4” Thread x 1/2” Thread   + $0.00
1 x 1/2” Schedule 80 Straight Barb x Male Thread   + $0.00
Discontinued   + $0.00

* Required Fields

- +


Earn 3,245 Reward Points Earn 9,735 Reward Points

    Start Controlling Nutrients in your Aquarium the Natural Way!

    Pair the Clear Water Algae Scrubbers with a powerful Sicce Syncra Silent water pump and you get a potent combination that can manage your reef tanks nitrates and phosphates. Algae scrubbers are designed to grow turf algae on a special screen, which gives the algae ideal conditions allowing it to grow on the scrubber's screen instead of your aquarium's display. 


    Ready-2-Run Algae Scrubber Bundle

    No guessing is needed with the BRS Ready-2-Run Clear Water Algae Scrubber Bundles. The kits include a high-quality Clear Water Algae Scrubber paired up with 3 feet of flexible silicone tubing and a Sicce Syncra Silent water pump that can feed the scrubber at the proper flow rates. Since every system is different, we included a Two Little Fishies Ball Valve that will let you dial in the perfect flow rate to grow algae as fast as possible. In most cases, the scrubber can drain right into the sump without any additional plumbing out of the bulkheads, but we do highly suggest using a small piece of PVC and an elbow for the drains to keep any potential splashing to a minimum. 


    CW-200 External Algae Scrubber

    • Easy to harvest
    • Safe design
    • Simple to plumb
    • Quality acrylic construction
    • Multi-directional input barb


    Sicce Syncra Silent 3.0 Pump

    • Powerful and efficient
    • Fully submersible
    • Adjustable flow rate
    • Synchronous motor 
    • 3-year manufacturer warranty


    Algae Scrubber Specifications:

    Max Recommended Tank Size - 250 Gallon

    Dimensions - 16" L x 10" W x 11 3/4" H

    Screen Dimensions - 9 3/4" x 8 1/4"

    Recommended Flow Rate - 450 GPH

    Input Barb Size - 1/2"

    Main Drain Bulkhead - 1"

    Emergency Drain Bulkhead - 1/2"

    LED Power Consumption - 60W @ 120VAC


    Sicce Syncra Silent 3.0 Water Pump Specifications:

    Dimensions - 4.84" L x 3.35" W x 4.13" H

    Max Flow - 714 GPH

    Max Head Height - 9.9 Feet

    Power Consumption - 48W @ 120VAC

    Input Size - 1" Female NPT or 1" Barb or 1 1/4" Barb

    Output Size -  3/4" Female NPT or 3/4" Barb or 1" Barb


    What's Included?

    1x CW-200 External Algae Scrubber

    1x Sicce Syncra Silent 3.0 Pump

    3ft 1/2" Silicone Tubing

    1x 1/2" Two Little Fishies Ball Valve

    1x 1/2" Schedule 80 NPT x Barb Adapter

    1x 3/4" x 1/2" Reducing Bushing



    How to Properly Size an Algae Scrubber

    While we can provide tank sizing recommendations based on typical feeding habits, the best and most accurate way of sizing for an ATS is based on the amount of food fed each day, measured for ease here as cubes of food, regardless of the size of your aquarium. There should be 12 square inches of growing screen per cube or equivalent amount of food fed to the tank each day. Oversizing an algae scrubber does not necessarily mean that it will grow algae faster or be more efficient, and in some cases, we have found oversizing the scrubber too large, can lead to poor results.


    Model Screen Size Cubes Per Day
    CW-50 6" x 6" up to 3
    CW-100 7" x 7" 2 to 4
    CW-200 10" x 8" 4 to 7
    CW-300 11.5" x 10.5" 7 to 10


    Installation Instructions:

    1. Find a suitable place for the scrubber to be placed that allows it to freely drain into your aquariums sump. 

    2. For best results remove the main and emergency drain bulkheads and install them in reverse (flange and gasket inside of the scrubber body).

    3. Using 1" soft tubing or PVC plumb the drain into your sump. 

    4. Plumb the emergency drain with 1/2" PVC or soft tubing allowing it to drain into your sump. We prefer to keep the emergency drain a few inches over the water level making the water crash into the sump that produces an audible noise, letting you know when something is not correct with the main drain.

    5. Attach 1/2" soft tubing to the included feed barb fitting. We really like using soft silicone tubing for this application. 

    6. Adjust the flow over the algae screen so that an even sheet of water flows down the screen. Flow adjustments can be made with either a ball valve on the feed line or with a DC style pump. 

    7. Plug the LED light power cord into a timer or aquarium controller and program it for a 12-hour daily photoperiod. We suggest illuminating the algae scrubber in an opposite lighting cycle than your display tank to help stabilize your aquarium pH. 

    8. Monitor the algae growth and after a few weeks, algae will be ready to harvest!


    Note - For feeding the scrubber we prefer to use a stand-alone feed pump since they can be fine-tuned to the algae scrubbers needs. We really like to use DC pumps that let us control the flow rate through a controller or an AC pump with a ball valve. 

    More Information
    Product Name CW-200 Algae Scrubber - Ready-2-Run Bundle - Clear Water (DISCONTINUED)
    SKU 212507B
    Out of stock message DISCONTINUED
    Write Your Own Review
    You're reviewing:CW-200 Algae Scrubber - Ready-2-Run Bundle - Clear Water (DISCONTINUED)
    Your Rating
    Only registered users can write reviews. Please or

    Product Questions

    No questions yet. Be the first to ask the question!
    Sign Up Now