Innovative Marine has designed a low voltage, high performance air lift pump specifically for auto top off controllers. The Auqa Gadget HydroFill ATO Pump System works with the HydroFill ATO Controller System or ATO of your choice.
- Complete with Lift pump, return pipe and acrylic
- Max output of 15 GPH
- Max Head: 5 Ft
- Self-priming pump
- Built-in check valve prevents back siphoning
- Thermally protected
HydroFill ATO Pump Specifications
- Pump Dimensions: 3.38" x 2.75" x 5.59"
- Voltage: 12V
- Power Consumption: 10W
- GPH: Up to 15 GPH
- Up to 5ft head pressure
- 1/4" barb fitting
- 2 Year Warranty
HydroFill ATO Controller System Manufacturer's Manual
HydroFill ATO Controller System Manufacturer's Specs
What's included?
- Hydrofill ATO Pump
- Hanging Mount & Hardware
- 12V Power Supply
Tubing not included - We recommend using 1/4" Flexeline Tubing
-
not reliable By Thomas on 6/3/2020
Thomas wouldn't recommend this product to a friendAfter having it 3 months I had to start hitting it for it to come on. not sure whats stuck but it shouldnt have this issue. Its hard to use my apex to top off when the pump doesnt pump when its called for. -
Steady slow stream, works well. possible duds By tom on 11/4/2018
tom would recommend this product to a friendI bought 2 of these for 2 different ato's. 1 went within the first 6 months but the second is still holding strong almost 2 years later. so, its possible to get a "dud", or "bad" pump, but if you get a good one, you wont be disappointed. -
Takes a beating By Ted on 4/7/2018
Ted would recommend this product to a friendThis pump is a bit louder than most but you should keep in mind that it does not get submerged like most other pumps. Space to hook the line in and the line out... Mine has ran for unknown times as a result of empty ato container but no issues.. Have had for well over a year with zero issues.. -
pump siphons through By Dan on 9/1/2017
Dan wouldn't recommend this product to a friendI have other innovative marine products including tanks and I have been impressed with their quality and value. This ATO pump was a dud. Installed the pump and "IM' controller on my 320 gallon reef and the pump does not shut off, just siphons through. It would empty my 15 gallon RODI reservoir if I wasn't watching after the installation. -
Does the Job. Bit Noisy.... By Alex on 1/7/2017
Alex would recommend this product to a friendI purchased this, after my Tom Aqualifter pump quit. I always had trouble with the aqualifter pump, as it didn't have the power to pump ATO water past 26". The system is an all in one system, so I kept the container of ATO under the cabinet. I had to position it just right, to get just enough drops out to keep the system running. But not very reliable.
Anyway, this pump has more than enough power to the job. One thing to note... the barbed fittings are 1/4 inch OD. Meaning the outside is 1/4 inch. So standard 1/4 inch RO tubing will not work. I had to go my nearest hardware store to get the tubing I needed. Other than that, it's a Great Vacum Pump. -
Very well built By Lei on 5/7/2016
Lei would recommend this product to a friendVery well built
Does this pump alert you if. The reservoir runs dry
Question posted on May 27, 2017 12:51:00 PM
This ATO does not have a timeout feature and does rely on the sensor inputs inside of the system to detect water level and shut the pump off.
Regards
Regards
Answer by: Zack (Admin) on Jun 5, 2017 1:46:00 PM
Is it quieter than the Tunze ATO pump? Similar flow rate?
Question posted on Apr 14, 2016 2:16:00 PM
Great question!
This pump will be quieter than the tunze and has a much slower flow rate. The rate on this pump is only 15 GPH. Feel free to let us know if you have any further questions!
This pump will be quieter than the tunze and has a much slower flow rate. The rate on this pump is only 15 GPH. Feel free to let us know if you have any further questions!
Answer by: Connor (Admin) on Apr 19, 2016 11:09:00 AM
