- A100 DC Controllable Pump (2,200 GPH) - Abyzz
Quality controllable DC pumps are hard to find, we did a bit of searching around and found Abyzz. A German company that is only using the best parts to make reliable, efficient controllable DC pumps. The easy to use driver boasts a full menu that has a LCD display allowing you to know the status of the pump, power usage, RPM, overall percentage of flow, temperature, and more. Abyzz pumps are fully controllable from 0-100% allowing you to set the flow exactly where you need it.
Max Flow - 2,200 GPH
Max Head - 19.5 feet
- Internal or External application
- Super silent operation
- Fully Controllable from 0-100% in 1% increments
- MCFS (Menu Controlled Flow Sequencer) for random, waves etc
- Integrated BoostMode
- Soft Start enabled
- Lockable cables and connections
- Rotating head
- Removable stand
- Enabled interface for peripheral devices
From titanium impeller shafts to the sinusoidal three-phase synchronous motor, the materials used in the Abyzz pumps have been carefully selected for harmonious compatibility and integration. Calcium deposits are easily the biggest avoidable issue with pumps used in saltwater aquariums. Abyzz has gone a step above the competition by including a pre-installed flush bearing, and silicon carbide bearings that will help protect against calcium deposits forming in the first place allowing a lifetime of operation.
One of the concerns when choosing a large pump should be power consumption and efficiency. Abyzz motors operate at an efficiency factor of over 90% making them the perfect energy saving solution. The driver and motor run off 12v allowing them to be used with an uncounted amount of applications. Each controller also has a 0-10v port for external control from aquarium controllers like the Neptune Apex system. Abyzz does make dedicated connections for different brands of aquariums controllers like GHL and Neptune that should be available very shortly.
- BOOSTMODE max flow: 2,200 gph
- Normal mode max flow: 1880 gph
- Head height max: 19.5 ft
- Rated input: 5-100W
- Input voltage: 90V-240V~ @ 50-60Hz
- Operating Voltage: 12V
- Ambient temperature: 35.6°F - 104°F
- Maximum operating pressure: 17.4 PSI
- Maximum immersion depth: 6.5 ft
- Pump cable length: 6.5 ft
- Inlet Size: 40mm / 1.5 in
- Outlet Size: 25mm / 1 in
- Internal or External application
- Dimensions: 6.11" L x 4.3" W x 4.32" H
- Abyzz A100 pump
- 90V/240V driver
- Power cable: 5 ft
- Driver/Controller connecting cable: 6.5 ft
- Operating manual
- 10 year limited lifetime warranty
This product was developed and is manufactured in Germany by Venotec.
A dream with unicorns By Ryan on 7/31/2019Ryan would recommend this product to a friendIt swirls and pushes water effortlessly and quite as a morning without children.
Put this on a closed loop, 300gal deep dimension tank powering one side with the random flow nozzles.
Typically runs about 75% on the high end of random mode for sps. Would like to put at 100% but I need more outlets to spread the flow around the tank.
Easy to maintain and has earned the reputation of number one.
Insurance By Jeffrey on 1/18/2019Jeffrey would recommend this product to a friendWhy would you pay that kind of money for a return pump? Simple put I looked at it like a business decision. The fish in my tank cost more than the pump then through in the mature colonies of coral. I can't afford to have a return pump fail. To me this is insurance against that. These pumps are over built and built proof. I am replacing a Eco Tech Vectra L1 because the inside of the magnetic impeller housing looks like it is melting. It's just a matter of time before it fails and when it does Murphy's Law will make sure it happens when I'm not home.
amazingly quiet By medtoad on 12/7/2017medtoad would recommend this product to a friendBought this pump to replace a Panworld as my return. It is so incredibly quiet its hard to believe it is even running! Now i notice the noise of my skimmer and overflow instead as I literally can't hear this thing running. Its so tiny as well that it's amazing it can produce so much flow. Pricey, but definitely worth it.
Awesome!!!! By ReeferXL on 7/31/2016ReeferXL would recommend this product to a friendI was very apprehensive about buying this pump because of the price. I had several break downs with my Ecotech Vectra M1. I had down a lot of research on the M1 and was super disappointed(M1 also runs very hot). I got the Abyzz overnighted to me by BRS. Hats off to BRS! I took their recommendation and this pump is just amazing! My chiller runs 1/5 the time. Pump runs super cool. At 60% i'm getting better head pressure as I got with my M1 at 100%. Power supply is only warm to touch. My M1's power supply was to hot to touch. This pump is just awesome!!!!!!!