Max Flow 1000 GPH
- Magnetic Mount
- 5 different flow modes
- Alternate flow modes
- Customizable flow cycles
- 24 hour program cycle
- Linear flow
- Controller with mounting cradle
- 1 year warranty
The 1K Gyre Generation pump from IceCap uses the same technology and water movement theory as the Maxspect Gyre but at a much better value. The 1K Gyre pump pushes a "sheet" of water across your tank virtually eliminating any dead spots with minimal amounts of flow. Compared to other traditional propeller style powerheads, the Gyre produces an even, linear flow that doesn't create any direct hot spots or dead spots.
The Gyre controller gives you 5 different modes of flow throughout a 24-hour programming cycle that you can tailor to your tanks needs, including a pre-set 10-minute feed mode. Included is a mounting bracket for the controller that secures the head unit anywhere you desire. The low profile of the 1K Gyre pump allows it to fit in tight spaces, and the magnetic mounting system makes installation a snap.
Flow Modes
- Constant
- Pulsing
- Gradual Pulsing
- Random
- Alternating Gyre
Specifications:
- Dimension - 8.8" L x 2.8" W x 1.5" H
- Flow Rate - up to 1000 GPH
- Power Consumption - 4w - 18w
- Cable Length - 6.5 ft (controller to pump) 5 ft (power supply to controller)
- Min Aquarium Volume - 20 Gallons
- Max Aquarium Volume - 100+ Gallons
- Max Aquarium Thickness - 1/2"
What's Included
1x 1K Gyre Pump
1x 1k Gyre Controller
1x 1K Controller Cradle
1x 1K Side Cap
1x Magnetic Mounting System
1x Power Supply
1x Instruction Manual
Note: Not compatible with Maxspect Gyre pumps or controllers.
Product Questions
Unforutanely there is not an extension for the IceCap Gyre. However, the Maxspect Gyre does have extensions.
Thank you for reaching out to us! The Icecap Gyre 1K would be great as you are generally aiming for around 30-50x tank turnover (960gph-1,600gph), If you have any other questions let us know.
Happy reefing! :)
Thank you for reaching out.
The controller on the 1K Gyre can only control an single pump and is not capable of controlling dual pumps.
Please let us know if you have any other questions.
Have a great day!
Thank you for reaching out with your question.
The magnet on the 1k Gyre is 1.8" x 2.8" x .56".
Please let us know if you have any other questions.
Have a great day!
Thank you for reaching out. Sorry for the delay in getting back to you.
I reached out to CoralVue for info and here is the info they provided:
The pump runs in 10 levels with level one starting at about 500gph to level 10 at 1000gph. That is with twin blades. So if you run theGyre 1K with a single propeller level one could be 250gph max output on level one and max at level 10 of 500gph single propeller.
Please let us know if you have any other questions.
Have a great day!
Login and Registration Form