-
+
$98.76
The Bulk Reef Supply Titanium Aquarium Heater System is a complete temperature control system that includes a virtually unbreakable titanium heating element paired with an Inkbird ITC-306a Wi-Fi Aquarium Temperaturere Controller which sets new standards in safety and reliability. The heater controller includes two large LCD displays for an instant readout of your tank's temp, and features an App that can push Wi-Fi notifications should anything be amiss. The controller also features dual power relays and dual temperature probes to prevent failures. The outlet dongle has two outlets, allowing for control of two heating elements, which can create another level of redundancy in your system.
Features
- Precise Digital Readout
- Dual Heater Control
- Easy to Calibrate
- Robust Titanium Heating Element
- Fully Submersible Elements
- Simple Suction Cup Mounting System
- 3-Year Heater Element Warranty
- Dual power relays ensure reliable function
- Dual temp probes for redundant temp verification
- App notifications
- Plug & Play
| Heater Wattage | Power Consumption | Heating Elements | Length/Diameter | Suggested Tank Size | Power Cord Length |
| 100W | 0.83A @ 120VAC | One | 10.25" / 1" | up to 40 Gallons | 72" |
| 200W | 1.6A @ 120VAC | One | 10.25" / 1" | up to 75 Gallons | 72" |
| 300W | 2.5A @ 120VAC | One | 10.25" / 1" | up to 100 Gallons | 72" |
| 600W | 5A @ 120VAC | One | 14.0" / 1" | up to 200 Gallons | 72" |
Why Titanium?
Compared to glass heaters, titanium heaters are virtually unbreakable and will never shatter in your aquarium and can conduct heat through the body much quicker, ultimately making them more efficient. In most cases when a glass heater fails, the failure-prone seals will go bad allowing water into the heater body and can start to corrode the contents inside the heater causing water contamination and possible electric shock, or the body will just shatter leaving glass particles throughout your aquarium. Titanium heating elements take both of those risks and virtually eliminate them by having a shatterproof body along with welded end caps for a life-time of operation.
Controller Specifications
- Control Range: 68°F - 95°F
- Display Resolution: 1°F
- Input Power: 120VAC @ 60Hz
- Max Output Power: 10 amps @ 120VAC
- Outlet Dongle Length: 12"
- Power Cord Length: 60"
- Temp Probe Length: 6.56 ft (2m)
- Warranty: 1 Year
What's Included?
- 1x Inkbird ITC-306a Wi-Fi Aquarium Temperature Controller
- 1x BRS Titanium Aquarium Heater Element
- 1x BRS Heater Suction Cup Mounting Kit
- 1-Year Heater Controller Warranty
- 3-Year Heater Element Warranty
| Manuals | BRS Titanium Aquarium Heater Element Manual |
|---|---|
| Dimensions | 10.25" Length |
| Diameter | 1" |
| Included Mounting | Suction Cup |
| WiFi | Yes |
| Power Consumption | 100 watts |
| Temperature Range | 68°F - 95°F |
| Power Cord Length | 6 Feet |
| Warranty | 1 Year (Controller), 3 Year (Heating Element) |
| Temperature Control | Controller (Included) |
| Alarms | Audible, Visual, Mobile Alert |
Write Your Own Review
Product Questions
Can I use this for freshwater aquarium?
Question by: Andrea on Nov 24, 2022, 7:42 PM
This can be used in freshwater aquariums.
Answer by: Tyler Schafer (BRS Staff) on Nov 26, 2022, 11:53 AM
Hi, if the product fails within the warranty date, do i contact you or the manufacturer? or are you the manufacturer?
Question by: Michael Brameyer on Aug 13, 2022, 9:20 AM
Thanks for the question! You would reach out to us within the warranty date on this. If the issue is with the heater we will get you taken care of and if the issue is the controller we will work with you and InkBird for warranty support. Let us know if you have any other questions!
Answer by: Kyle Thomas (BRS Staff) on Aug 17, 2022, 10:54 AM
The heater manual indicates when mounting vertically to be sure the water line is above the marked minimum water line level, but makes no mention what that minimum is. For the smallest 100w heater, what would the minimum be when used vertically?
If unable to place in a sump, is there a guard/sleeve product available to protect snails and serpent stars from getting fried if using directly in the tank space?
If unable to place in a sump, is there a guard/sleeve product available to protect snails and serpent stars from getting fried if using directly in the tank space?
Question by: Steve Simons on Apr 6, 2022, 11:32 AM
Hey there,
Thank you for reaching out to us. There should be a line right about Bulk Reef Supply on the heater. That is the minimum water level. There is not a sleeve or guard for the heater.
Please let me know if you need anything further and take care!
Thank you for reaching out to us. There should be a line right about Bulk Reef Supply on the heater. That is the minimum water level. There is not a sleeve or guard for the heater.
Please let me know if you need anything further and take care!
Answer by: Matt Lucero (BRS Staff) on Apr 7, 2022, 7:54 AM
Can the temperature probes be replaced if one fails? Wondering about longevity of the unit. Thanks.
Question by: Kevin Thurman on Dec 3, 2021, 12:45 PM
Yes, the temperature probe is replaceable. Here is a link to the replacement probe:
https://www.bulkreefsupply.com/replacement-probe-for-itc-308-aquarium-temperature-controller-inkbird.html
https://www.bulkreefsupply.com/replacement-probe-for-itc-308-aquarium-temperature-controller-inkbird.html
Answer by: William Glenn (BRS Staff) on Dec 14, 2021, 12:26 PM
Can this heater be attached horizontally? I have a shallow tank, so it won't fit vertically. But I could attach it horizontally at the bottom of my tank under my filter intake which seems like the perfect spot if the heater can function that way.
Question by: Shane on Nov 6, 2021, 12:36 AM
Yes, the heater can be run horizontally.
Answer by: Matt Lucero (BRS Staff) on Nov 8, 2021, 12:38 PM
Login and Registration Form