ZT-6600A QMaven Series LED Light
The Zetlight ZT lights are made out of aluminum for a super light and thin design that is attractive to look at. With the moonlight strips even when the main light is off it gives off a beautiful blue accent that will act as a moonlight for your tank.
Smart Fan Technology
With Smart Fan technology the fan will start to turn on as the lights temperature increases and turn off as it decreases keeping your light running at peak performance for a lifetime. The Fan will direct cool air over the aluminum housing while the air intake shroud keeps saltwater and dust out of the cooling fins.
Controlling the Zetlight ZT is very simple with the included on-board interface and infrared remote control, their are well over 999,999 different configurations. If you have a Neptune Apex controller, it is very simple to connect the light to a serial port on a VDM module and program the light.
Flexible Mounting Solutions
Included are easy to install mounting legs that can easily mount onto the rim of any tank up to 1.2" thick. The legs can extend to fit tanks as long as 47" and tuck in as tight as 28.3". A hanging kit can also be used to suspend the fixture from ceilings, wall brackets or inside of a hood. If you are going to mount the light within a canopy we do recommend keeping a few inches between the fan and the top of the canopy to allow proper airflow around the fixture.
- Max Spread - 44" x 24"
- Recommended Spread - 36" x 20"
- Max tank length: 47"
- Min Tank length: 28.3"
- Fixture Dimensions: 27.2" x 10.2" x 1.6" (LxWxH)
- Total Power: 200W
- Lumens: 9600LM
- Tank Thickness: up to 1.2"
Number of LEDs:
2x 40W Dense Group White 12000K
4x Blue 465-485nm
6x Violet 410-420nm
20x Royal Blue 450-465nm
3x Red 620-630nm
3x Green 520-535nm
2x Orange 610-620nm
1x Zetlight ZT-6600A LED fixture
1x Mounting Leg set
1x Power Supply
1x IR Remote Control
Note: Apex to Zetlight Connection Cable required for Apex control, sold separately
|Out of stock message||Discontinued|
These lights are not able to be daisy chained together for function with the apex. Feel free to let us know if you have any further questions!
This will be able to be turned on or off but not controlled.
With the light being 5 feet high there will certainly be some unavoidable light spillage to shine in your eyes. These lights will typically only impact your eyes when sitting next to the tank.
These will work great over a 36 x 1 area. With most Par for high light corals in the center and lower light corals towards the bottom and edges of the tank. Feel free to let us know if you have any further questions!
There will be a slight shadow depending on how high the light is off the tank. This will not be impacting the multi-chip LED and not noticeable in most cases. Feel free to let us know if you have any further questions.
With the average spread being 36" two of the fixtures would work great over a tank of 72" The spread will be not quite 20" deep for SPS growth though to keep in mind the overall depth the lights can penetrate.
Two cannot be controlled as one with the Apex. An individual apex connection will be required for each light.
This light is designed for coral growth and will work well! It is not reef keeper compatible and currently can run alone or with the apex VDM module and adapter. Feel free to let us know if you have any further questions!
This does come with the hanging hardware! Feel free to let us know if you have any further questions!