Ink Bird’s ITC-306a represents new heights of functionality and safety with multi-layer protection and built-in Wi-Fi communication.
The easy to program temperature controller lets you connect up to two heaters to keep your aquarium's temperature super stable. The dual-screen LCD display lets you easily see the controller's setpoint along with the actual temperature of the aquarium. Programming the controller only takes a minute and doesn't require any special programming knowledge to get it right.
Features
- Dual power relays ensure reliable function
- Dual temp probes for redundant temp verification
- App notifications
- Plug & Play
- Dual Heating element Control
- Works great with BRS Titanium Heating Elements
Redundant Protection Built-In
The temperature controller is equipped with 2 power relays to ensure that the power can be turned off under any circumstances. This means extra peace of mind that your aquarium is safe from your heater failing on. The ITC-306a also includes dual temperature probes, and the controller monitors and compares the probe readings for any disparities. This provides protection against a failed or inaccurate probe, and if the difference between the probes goes over 5°F, the controller will alarm and send an alert to your mobile device.
App Notifications
Pair the aquarium temperature controller with your phone via 2.4GHz Wi-Fi, and the controller will push notifications to the app on your mobile device if the temperature falls outside of your set range by more than 5 degrees Fahrenheit.
Dual Outlets, Redundant Protection
The 306a Aquarium Temperature Controller is rated for a total load of up to 10 amps (1,200 watts at 120 volts) across both outlets combined. The combined power draw of all connected heating elements must stay within this limit. For added safety, it’s recommended to operate at no more than 80% of maximum capacity. If your combined heating elements exceeds 1,000 watts, consider using an additional controller and socket to power you entire system.
The dual outlets are a big advantage because they allow you to run two smaller heaters instead of one large heating element. This approach is highly recommended, as it adds redundancy and reduces the risk of total heater failure. The likelihood of both heaters failing at the same time is significantly lower.
Specifications
- Control Range: 68°F - 95°F
- Display Resolution: .1°F
- Input Power: 120VAC @ 60Hz
- Max Output Power: 10 amps @ 120VAC
- Outlet Dongle Length: 12"
- Power Cord Length: 60"
- Temp Probe Length: 6.56 ft (2m)
- Warranty: 1 Year
What's Included?
- 1x ITC-306a Wi-Fi Aquarium Temperature Controller
- Instructions
| SKU | 213903 |
|---|---|
| UPC | 8756055244938 |
| WiFi | Yes |
| Power Consumption | 1200 watts |
| Controller Type | Single Stage |
| Temperature Range | 68°F - 95°F |
| Power Cord Length | 5 Feet |
| Warranty | 1 Year |
| Aquarium Type | Saltwater, Freshwater |
Product Questions
Thank you for reaching out to us. A lot of the time it comes to where they will fit. I would try to leave them as far away from the heater as possible in the sump. To get the most accurate tank temperature. Please let me know if you need anything further.
https://www.bulkreefsupply.com/replacement-probe-for-itc-308-aquarium-temperature-controller-inkbird.html
Thank you for reaching out to us. Both of the plugs on the heater are controlled at the same time, so if one heater is on, both are on. Let me know if you have any other questions, and have a great day.
Login and Registration Form