Free Swag with orders over $249 Free Swag with orders over $249
Orphek

Universal Atlantik LED Mounting Kit - Orphek

In stock
SKU
212105
$90.00

Earn 90 Reward Points

$125.00
- +

Tank Mount Your Orphek Atlantik Lights!

Depending on your aquarium, you may need to mount your light off the back of your tank instead of a traditional hanging kit. Orphek now has a tank mounting kit made of thick aluminum. Each mounting arm comes with two mounts to allow for secure holding of the heavy Orphek LEDs but also gives you multiple different mounting configurations too. If you have a 40-gallon breeder or a 210 gallon these mounts can get your lights hanging right where you want them. 

 

Specifically designed to be compatible with Gen 1 or Gen 2 Atlantik V4 LEDs and Atlantik V4 Compact LEDs.

 

Each mount comes with all the hardware and mounting screws to securely mount your light off the back side of your aquarium. The mounts work best with rimless aquariums but can be used with rimmed tanks as well, but are not compatible with euro braced aquariums due to the nature of the mounting kit. You can easily mount your light onto the slide bracket and adjust the positioning right where you want it. If you have multiple lights, you will need one mounting kit per light. 

 

Specifications:

Max LED Mounting Height* - 15.75"

Min LED Mounting Height* - 8"

Max Reach** - 17" 

Min Reach** - 11"

Tank Thickness - 0.39" - 0.78" (10 - 20mm)

 

*Height is measured to the bottom of the Atlantik fixture

**Reach is measured to the center of the Atlantik fixture 

 

What's Included?

2x Aluminum Vertical Brackets

2x Aluminum Light Support Brackets

2x Aluminum Tank Clamps

2x Plastic Tank Protector Sheets

Mounting Screws & Hardware

More Information
Product Name Universal Atlantik LED Mounting Kit - Orphek
SKU 212105
Write Your Own Review
You're reviewing:Universal Atlantik LED Mounting Kit - Orphek
Your Rating
Only registered users can write reviews. Please or

Product Questions

How long are the brackets/clamps? I have 13.5 inches of space on the back of my aquarium before the separated overflows/compartments. The arms have to be 9 inches apart. Will the brackets/clamps fit on the back of my IM Nuvo Abyss Panorama 20g tank?
Question by: Raleigh Sudemir on Jul 1, 2019, 9:25 PM
Hey there,
Thanks for reaching out to us. The clamps are 6" in length and the vertical bracket are in the middle. The kit will work, but all depends on what light you are using for compatibility. Please let us know if you have any further questions. Take care!
Answer by: Mark Schlough on Jul 2, 2019, 9:39 PM
Can this mounting kit be used for an ATI 36 inch T5 LED Powermodule? The model number is ATI2605. Not sure on the weight of that light but I am guessing at least 20 pounds.
Question by: Chris Marmino on Feb 4, 2020, 7:18 PM
Hey there,

I would not consider using those mounts, they secure to the glass and a fixture that heavy would likely crack your glass. I would looks at the A series mounting arm by Kessil and secure it to the stand.

Take care
Answer by: Thomas Billington on Feb 5, 2020, 4:56 PM