The ReefBreeders Reef Nano LED is designed specifically for growing corals in your Nano reef tank. It is super compact at just 4.25”diameter by 1.25” tall, yet can cover up to 24” square with its 120 degree wide lens angle for even light distribution. Every Reef Nano has a built-in heat sink, silent temperature controlled cooling fan, adjustable gooseneck tank mount, 12 3watt LEDs for increased power, and onboard controls for easy programming.
|
Channel |
Color |
Wattage |
QTY |
|
A |
450nm Royal Blue |
3 |
5 |
|
A |
420nm Violet |
3 |
1 |
|
B |
480nm Cool Blue |
3 |
2 |
|
C |
7500K Cool White |
3 |
4 |
The Reef Nano LED features intuitive built-in controls. Use the 4 touch-sensitive buttons and LCD screen on top of the light for easy programing. The onboard 3 channel controller has 3 timer points and a ramping function, allowing you to simulate full sunrises, sunsets, and moonlight conditions.
The included tank mounting bracket works with any tank with a rim less than 1″ in width. It is adjustable and can be used on tanks up to 24″ front to back. The Angle of the mounting arm sets the light to the ideal height over the water based on the width of your tank. As you slide your light towards the center of your aquarium, it also rises higher above the water level.
Recommended Spread - 12" x 12" for SPS, 18” x 18” for mixed reef, 24” x 24” for soft corals.
LED Specifications
- 5x 450nm Royal Blue
- 2x 480nm Cool Blue
- 1x 420nm Violet
- 4x 7500K Cool White
Light Specifications:
- Light Dimensions: 4.25" D x 1.25" H
- Gooseneck Length: 10.5"
- Total Power Consumption: 30W
- Max Tank Thickness: 1"
- Cord Length: 7ft
- Warranty: 2 Years
What's Included?
- 1x ReefBreeders Reef Nano LED Light
- 1x ReefBreeders LED Gooseneck Tank Mount
| UPC | 705333175271 |
|---|---|
| Lighting Type | LED |
| Number of LEDs | 12 |
| Max. Light Coverage (Length) | 24 in. |
| Max. Light Coverage (Width) | 24 in. |
| Power Consumption | 30 watts |
| Control Type | Onboard Controls |
| Included Mounting | Gooseneck |
| Max Tank Thickness | 1 in. |
| Color | Black |
| Power Cord Length | 7 Feet |
| Bulb Color/Temperature | 6500K, Actinic, Blue, Purple |
| Warranty | 24 months |
Product Questions
You program the light by setting times, 1, 2, and 3 for each of the same channels. Time 1 is the starting time, and all channels should be set to 0. Time 2 is the peak hour, it should be the center of your daily program and have your desired settings for channels A, B, and C. Time 3 is your off time, and all channels should be set to 0. Your light will automatically ramp up from time 1 to time 2, then ramp down from time 2 to time 3. This emulates a full sunrise and sunset.
Login and Registration Form