Exo Auto Top Off - ReefBreeders
Maintain a consistent salinity in your aquarium without relying on failure-prone float switches. Arguably the most time-saving addition to any tank, never worry about your aquarium running dry again. With all internal components built into the optical sensor housing, there are no additional controllers to mount giving a clean and easy to install system. The Exo Mounts easily to clear sump and aquarium walls with internal magnets that securely hold on glass up to 5mm thick. The Reef Breeders Exo ATO system is an ultra-intelligent and compact bundle at an affordable price sure to make your tank more enjoyable.
- Frequency Alert: The system will beep to notify you that your aquarium has not been topped off for an unusual amount of time, at least 24 hours, and double the average time between Top Off. Ex: if the Avg. time between topping off is 12 hours, the system will notify you after 24 hours of not topping off.
- Overfill Alert: The system develops and average time that the pump is running each time the system is activated. If the system detects that liquid has been dispensed for more than 3x that average baseline time, it will shut the pump off and create an audible alarm.
- Empty Reservoir Alert: The system can detect when the top off pump is drawing excess air/running dry and automatically shut the pump off and create an audible alarm.
- Sensor Obstruction Alert: The system will detect if the in-tank sensor needs to be cleaned, is being obstructed or is out of alignment. This is denoted by a flashing blue light.
- Power Input - 120V AC, 60Hz
- DC Pump Max Head - 8 feet
- Max Mounting/Tank Thickness - 0.2" or 5mm - must be used on clear glass only
- Internal Dimensions - 1.4"L x 1.4"W x .6"H
- External Dimensions - 1.75"L" x 1.25"W
- Warranty - 12 Months
- Water level detection - Optical
1x Power Supply
1x Tubing Holder
|Product Name||Exo Auto Top Off - ReefBreeders|
Thank you for reaching out to us. Yes, it can, but if you have a black film on the glass, it will need a small portion to be cut off. It should be in the return pump chamber.