- Dosing Pump Hose Connector & Holder - DVH Aquatics
Get the Perfect Drip
Dosing liquids using a traditional tube holder allows the tube to curl which is less than ideal, the Dosing Pump Hose Connector & Holder uses acrylic tubes that securely attach to the holder. Angled bottom cuts allow liquids to flow out without ending up on your aquarium walls. Just push any standard dosing pump tubing over the acrylic stems, attach the holder to your aquarium wall or sump baffle and insert the tubes for a sturdy liquid delivery system.
- Made From 100% PMMA Acrylics
- Set Screw Keeps Tubes Away From Walls
- Angled Outlet Keeps Splashes Down
- Large Diameter Connections Do Not Hinder Flow
Dimensions - 2.4" L x 2" W x 1.1" H
Max Tank Thickness - 1/2" (14mm)
Acrylic Tube OD - 5mm
Acrylic Tube ID - 3mm
4x Acrylic Tubes
1x Mounting Bracket
1x Mounting Bracket Set Screw
Note - Tubing not included
Thread is Terrible By Young on 7/23/2019Young wouldn't recommend this product to a friendAs everyone else stated in the review, the main screw to hold the item in place just keeps popping out. It wont hold it in place. I ended up just using double sided tape to hold this in place. It gets 2 stars because overall its cheap, and it does hold the lines.
it is $8? By Dayton on 3/16/2019Dayton would recommend this product to a friendI do not understand what people are thinking calling this thing cheep or poorly made its a solid piece of acrylic. It is made to hold dosing lines. If you are going to call it cheep then maybe go spend $30 on a different one. It is great for $8; you can not get much in this hobby for this price. Do not let incompetence sleep on this dosing holder it does the job. Or you know you can cry about it in a review because it is not ridiculously over engineered.
Rim-less tanks only also doesn't fit together By LORI on 2/27/2019LORI wouldn't recommend this product to a friendI don't have a rim-less tank. This won't fit over any rimmed tank. The hard pipe won't go into the holder. My hose won't fit over the hard pipe. Bracket won't fit over the rim on my tank not even a 10 gallon. Just tested with one in the garage. Should not sell something that is not versatile. I don't want to read all the fine print like 1 inch max … just want to see something I want and order it and have it be versatile enough to work.
cheap and flimsy By Phil on 1/29/2019Phil wouldn't recommend this product to a friendThreaded plastic bolt just slips and won't actually hold it on. I could barely get the dosing tubing to fit on it, it feels like it could pop off at any time. Im summary its bad at holding dosing tubes and bad at security itself to the side of the tank.
Don't buy, this is poorly designed and built By Brian on 1/4/2019Brian wouldn't recommend this product to a friendI got this because my new sump didn't have one built in. But this item is too flimsy and the threaded bolt to secure it just slips through the threaded holder and it keeps popping off the rim. Not sure what size the ferrules are but I could not get my dosing hoses to slide over the ends. One of the holes cracked and broke off when I was trying to connect the tubing. Ended up in the trash.
Perfect dosing tube holder By Nonemos on 1/4/2019Nonemos would recommend this product to a friendI don't know why the previous reviewer dinged this thing for not working on a rimmed tank when the product description clearly states the tank thickness limitation. Assuming you pay attention and this is suitable for your tank, it works great. I really like the tube connections. They make sure the fluid goes where you want, and they prevent annoying build-up on the tube. Ingenious!
Ehhhhh By sam on 1/2/2019sam wouldn't recommend this product to a friendThe nylon screws stripped the threads on the bracket when I tightened them, making the product very easy to, "bump off" the tank edge. The plastic is too thin, the screws do not "Settle" into the threads properly, and you begin tightening the screws only to find they are now stripped. I am buying a different product.
Will not fit over top frames By George on 11/2/2018George wouldn't recommend this product to a friendIt appears that this holder is designed for rimless tanks; I purchased two holder for separate aquariums, both with rims, and the flange spacing on the holder is too narrow to fit over the frame. Great price and product if you have a rimless aquarium.
Simple but effective By Cameron on 10/19/2018Cameron would recommend this product to a friendThis is a very simple tube holder that does exactly what you need it to do. I will say that getting the hoses over the acrylic spouts can be a bit challenging but, the end result is worth it.