- CWT 35 - 30" Algae Scrubber Ready Sump (OPEN BOX) - CWT Aquatics
The CWT sumps are the first sumps specifically designed to accept an algae scrubber, filter roller and DC return pump without complicated plumbing or unsightly tubing!
These high-quality sumps are MADE IN THE USA using 1/4" cell cast acrylic. The side and bottom panels are clear and opaque black acrylic is used for the top and interior baffles which creates a clean, contemporary look that compliments any color scheme.
The included bracket and PVC rail system located in the center chamber supports compatible Clear Water Algae Scrubbers above the water level while still allowing enough space for a protein skimmer or additional filtration equipment.
The intake or drain chamber accepts standard 4" filter socks but is also specifically formatted to work with the Klir Fleece Filter Roller for maximum mechanical filtration and pristine water clarity. A 1" slip bulkhead located on the return chamber is aligned to fit directly onto the EcoTech Marine Vectra M2 DC Return Pump but will also work with a wide range of additional pumps.
All models feature a probe holder with 4 ports, JG fittings for dosing lines located in the return pump chamber, the adjustable water level in the center chamber, black colored lids to prevent salt creep and bulkheads for both the drain and return pump connections.
Compatible Algae Scrubber:
With scrubber installed, there is a remaining footprint of 17.5" x 6" for a protein skimmer or additional equipment of your choice. When using a protein skimmer alongside an algae scrubber, we recommend downsizing your skimmer because of the reduced nutrient levels as a result of the scrubber.
Compatible Filter Socks/Fleece Rollers:
Total Volume - 34.4 Gallons
Overall Dimensions - 31" L x 16" W x 16" H
Intake/Drain Chamber Dimensions - 5" L x 15.5" W x 16" H
Center Chamber Dimensions: 17.9" L x 15.5" W x 16" H
Return Chamber Dimensions - 7.25" L x 15" W x 16" H
Bubble Trap Dimensions: 2" L x 15.5" W
Drain Bulkhead - 1" Slip x Slip
Return Bulkhead - 1" Slip x Slip (dual)
Filter Sock Holder - 4" Diameter
Lid/Splash Guard(s) - 8.9" x 4.5" (return) and 5.75" x 10" (drain)
Adjustable Water Level - 6" - 10" Reversible Weir (Flat or Toothed)
Probe Holders - 4 (3x 1/2" diameter and 1x 3/4" diameter)
Cable Grommet - 2"
1x CWT 35 Long Sump
3x 1" Slip x Slip Bulkheads
1x Reversible Weir
1x Cord Grommet
5x Push-Connect Dosing Tube Bulkheads
2x Splash Guards/Lids
1x Perforated Removable Drip Tray
1x Removable Drip Tray Stand
1x Algae Scrubber Support Bracket System
Note: Filter sock & algae scrubber not included.