Turn any 1" PVC into a random flow generator
Vivid Aquatics 3D printed random flow generators easily slips onto PVC for a custom flow pattern through their patent pending randomized design. Each RFG is made of reef-safe PETG plastic and made to outlast your aquarium. Just slip the 1" PVC fitting onto any pieice of 1" PVC for a customized random flow device in seconds.
One Size Available:
1" PVC Slip Fitting
Randomizer
Vivid Creative Aquatics revolutionary design uses a set of 5 fins in a spiraling design that channels the water in from one direction at the base of the eductor and then out of the nozzle a different direction. The small amount of interference at the base of the eductor helps create a random change in the intake affecting the flows path exiting the nozzle.
Specifications:
Dimensions - 3.45" L x 1.9" OD
Min Flow Rate - 320 GPH
Optimal Flow Rate - 720 - 1000 GPH
What's Included?
1x Random Flow Generator Nozzle
| UPC | 852464008104 |
|---|
Product Questions
Thanks for reaching out to us. The Red Sea aquariums would require the adapter first before you can attach the RFG nozzle and provided links below. If you have any further questions please let us know. Take care!
https://www.bulkreefsupply.com/red-sea-reefer-return-nozzle-to-loc-line-drop-adapter-vivid-creative-aquatics.html
https://www.bulkreefsupply.com/red-sea-reefer-return-nozzle-to-loc-line-adapter-vivid-creative-aquatics.html
https://www.bulkreefsupply.com/random-flow-generators-for-loc-line-vivid-creative-aquatics.html
Thank you for reaching out to us! Unfortunately this will not fit with the Red Sea 250, but you can use this adapter: https://www.bulkreefsupply.com/red-sea-reefer-return-nozzle-to-loc-line-adapter-vivid-creative-aquatics.html paired with the smaller RFG: https://www.bulkreefsupply.com/random-flow-generators-for-loc-line-vivid-creative-aquatics.html which should work for your system.
It will not, you need to use this adapter https://www.bulkreefsupply.com/red-sea-reefer-return-nozzle-to-loc-line-adapter-vivid-creative-aquatics.html and then either 1/2" or 3/4" https://www.bulkreefsupply.com/random-flow-generators-for-loc-line-vivid-creative-aquatics.html
Take care
Thank you for reaching out.
Yes, that nozzle is printed on an FDM 3d printer using PETG filament.
Please let us know if you have any other questions.
Have a great day!
Login and Registration Form