- SmartController 7000 (OPEN BOX) - Tunze
Control your Tunze pumps, lights, heaters, CO2 system and many other accessories, all through WiFi with The Tunze SmartController 7000. The new controller lets you connect and sync all of your accessories together through a single controller giving you maximum control through individual channels.
- Includes Temp Probe
- Tunze Light Control
- Tunze Pump Control
- Heater Control
- pH Control
- CO2 Control
- Compatible with Tunze Safety Connector 6105.500
Using the SmartController 7000 can be done through the head unit but additional features will be unlocked when it is connected to the internet and controlled through a smartphone or PC. Connecting to the internet is very simple and you can connect to the SmartController through its own access point or connect it to an existing network letting you control it from anywhere in the world.
The Tunze SmartController 7000 is the ultimate pump and lighting controller for Tunze Turbelle Controllable Pumps. Individually control your stream pumps through 4 separate channels that allow you to customize the overall flow and intervals and wave generator settings. Select channels can be set to sync or anti-sync for standing waves, and increased flow characteristics.
- Wave Generator
- Feed Mode
- Night Mode
- Storm Mode
- Interval Mode
Directly drag on a graph or use the controllers head unit interface to customize your Tunze LED lights daily schedule, moonlight settings, and run real-time test and daily cycles.
- Moonlight Simulation
- Individual Channel Control
- Daily Cycle Simulator
- Seasonal Brightness
- Sync Multiple Lights
Set up controllable outlets using the Controlled Power Socket (7070.120) to monitor your heater or chiller and to take action if they ever fall outside of your designated ranges. The outlets can be used for many other applications that can be controlled by the temperature probe.
CO2 and pH Control
The Tunze SmartController 7000 is the perfect calcium reactor controller. With the CO2 Valve Set (7070.00) you can control the flow of CO2 into your reactor with a pH probe that you can customize and set the exact pH you wish to achieve in your reactor.
Scale - °C or °F
Control Range - 41-122°F
Hysteresis - 0 - 0.3°C
History - 22 Hours (PC or Smartphone Required)
pH Range - 1.5 - 12
Hysteresis - +0.02 and -0.05 mV
Temp Compensated - Yes
Dimensions - 5.625" L x 1.5" W x 5.25" H
Controllable Channels - 4
pH Probe Connection - BNC (works with most aquarium based pH probes)
Control In/Out Ports - Four 6-pin ports (can use the Tunze Y Adapter for additional ports)
1x SmartController 7000 with Temp Probe
1x Power Adapter
1x Wall Mount Bracket
4x Control Cables
Note: pH Probe not included.
There are no videos related to this product.