Carbon Mesh Bag
- PRODUCTS (8)
…Remove Xport-NO3 from pail and pour water into the aquarium system, then place Xport-NO3 into canister filter, media reactor, or 800µm mesh filter bag; a flow-through rate of 1 - 3x the total aquarium volume per hour is recommended. Do not fluidize. In systems with an initial [NO3] of <40 ppm,…
…carbon. Passive filtration: Place Carbont-P loosely in an 800μm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage will serve to shift the carbon particles and increases effectivness of this method. Technical Background“Activated carbon”…
…require that the media be housed inside a mesh bag, within the housing. Use a 150-micron mesh filter bag (included) in this case. Passive filtration:Place Puritloosely in a 150-micron mesh filter bag and locate in an area of low-to-medium flow. Turning bag over once weekly will serve to shift the…
…filtration: Load carbon into filter cartridge as directed by filter manufacturer. Passive filtration: Place CARBONT-X3 loosely in an 800μm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage will serve to shift the carbon particles and increases…
…Remove Xport-NO3 from pail and pour water into the aquarium system, then place Xport-NO3 into canister filter, media reactor, or 800µm mesh filter bag; a flow-through rate of 1 - 3x the total aquarium volume per hour is recommended. Do not fluidize. In systems with an initial [NO3] of <40 ppm,…
…Remove Xport-NO3 from pail and pour water into the aquarium system, then place Xport-NO3 into canister filter, media reactor, or 800µm mesh filter bag; a flow-through rate of 1 - 3x the total aquarium volume per hour is recommended. Do not fluidize. In systems with an initial [NO3] of <40 ppm,…
…NoCarbont-Z loosely in an 800µm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage increases effectiveness of this method. Shipping Bag Use Use 1/4 - 1/2 teaspoon NoCarbont-Z per quart shipping water in bag. When shipping multiple specimens…
…the PhosphtR resin. The ideal set-up for regeneration is to place resin inside a mesh bag (if not already in one) and place the bag inside the mouth of a large funnel; funnel size must be large enough to contain entire bag and contents. Alternately, an empty ½ gallon LDPE plastic milk jug can…