Skimz QuietPro Pumps are full feature pumps that use a brushless 6-pole synchronous motor allowing you to have full control over the flow of the pump from 100% down to 5% while remaining completely silent. The included controller has a LED display that will show you the speed mode you are on, and also the wattage being consumed.
Skimz gives you control of the pump from 5%-100% through the DC pump controller making it the perfect pump for aquarium equipment ranging from small reactors, closed loop systems and even dedicated return pumps.
Each Skimz QuietPro Pump has a slow start feature that gently ramps the pumps flow up to the desired setting over the course of a few seconds.
The pump will automatically shut off when the temperature either gets too hot, or too cold removing the possibility of the pump damaging itself.
Enter or exit feed mode with a single push of a button on the controller. QuietPro pumps have a 10-minute feed mode and will revert to the same power settings that were being used before feed mode was engaged.
Dimensions - 8.30" L x 4.15" W x 7.1" H
Max Flow - 2377 GPH
Max Head - 15.4 Feet
Speed Variable - 5% - 100%
Input Fitting - 40mm BSPP
Output Fitting - 40mm BSPP (pump includes 3/4" 1" & 1 1/4" barbed adapters)
Voltage - 24V DC
Max Power Consumption - 70W @ 120V AC
Liquid Temperature Range - 36°F - 104°F
Ambient Temperature Range - 32°F - 122°F
1x QuietPro 9.0 DC Pump
1x QuietPro 9.0 DC Controller
1x Intake Screen Guard
1x Power Supply
1x 3/4" Barbed Adapter
1x 1" Barbed Adapter
1x 1 1/4" Barbed Adapter
Great product By anthony on 10/3/2017anthony would recommend this product to a friendawesome pump works great kept shutting off at beginning . maybe it was breaking in . now runs flawless
Bad pumps By Ezequiel on 8/13/2017Ezequiel wouldn't recommend this product to a friendBrs sent me a new one after the first one stopped working after 1 month. The replacement stopped working after the first day.
2 failed pumps By Joseph on 7/21/2017Joseph wouldn't recommend this product to a friendI don't write many or any reviews but I purchased one of these a few weeks ago for my 220g tank. The first one would only kick over not even able to function. BRS sent me a replacement and that one failed after 15 minutes. BRS gave me a full refund...great customer service faulty product
Good value By Dan on 7/13/2017Dan would recommend this product to a friendJust replaced a failing Vectra M1 with the 9.0. This pump at full power is putting out about the same flow as my M1 was @ ~80%. It does have slightly more restriction because I had to add a bard>slip fitting.
Which brings me to my biggest complaint - there are no included adapters to allow hard plumbing. If it came with the correct hard plumbing adapter this would be a 5 star product.
There are no videos related to this product.