FREE Hat with orders over $199 - Learn More

Ro Tubing

SORT:
VIEW: 32/64
130 items found. Showing items 1 to 32 .

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings. Six Sizes Available: Each…

    $1.99 Regular Price: $
    Choose Options

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings. Blue RO Tubing is commonly…

    $1.99 Regular Price: $
    Choose Options

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings. Black Tubing is commonly…

    $1.99 Regular Price: $
    Choose Options

    …systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings. Natural Clear coloration is a semi-translucent white tubing. It allows you to slightly see through the tube but is not 100% clear. It is great…

    $2.49 Regular Price: $2.99
    Choose Options

    …polyethylene RO tubing, but can also be used with some types of dosing pump tubing as well. Each bracket can be individually mounted with the included mounting screws or with alternative methods like double sided tape and other adhesives. Mounts In Seconds Can Hold up to 4 Tubes Compatible with…

    $5.99 Regular Price: $
    Choose Options

    …Aquatec 8800 Power Supply required for installtion. An Auto-Flush Flow Restrictor will assist the RO membrane to perform with maximum efficiency for longer time periods. At BRS, we recommend that an RO system be flushed on a regular basis. The use of this auto-flush flow restrictor can reduce the…

    $54.99 Regular Price: $
    Choose Options

    …the release tool is super simple, just place the properly sized shoe around the tubing and push it down into the fitting, depressing the collet. Then while you are pushing the collet into the fitting, pull the tubing out of the fitting and you are done! Works with: 1/4" Push Connect Fittings 3/8"…

    $3.49 Regular Price: $

    Mur-lok Stem Adapter Tube x Hose Stem Stem side slides into standard push connect fittings. Barb side is designed for flexible tubing like nylon or clear pvc. Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American…

    $1.49 Regular Price: $
    Choose Options

    …for other uses. Mur-Lok EZ Faucet Adapter 3/8" 1/2" Male Thread x 1/2" Female Thread Fits 3/8" RO tubing Polypropylene construction NSF Standard 58 Certified Mur-Lok EZ Faucet Adapter 1/4" 1/2" Male Thread x 1/2" Female Thread Fits 1/4" RO tubing Polypropylene construction NSF Standard 58 Certified

    $5.99 Regular Price: $
    Choose Options

    Polyethylene Tubing for Reverse Osmosis Systems Compatible with all Bulk Reef Supply RODI Systems and other RO(DI) systems that utilize 1/4" Polyethylene Tubing. The 1/4" measurement is the outside diameter of the tubing and will work with all 1/4" Push-Connect fittings. Red RO Tubing is used on…

    $1.99 Regular Price: $
    Choose Options

    Standard 1/2" (OD) tube for RO systems and BRS reactors Made in the USA, Mur-lok Linear Low-Density Polyethylene (LLDPE) tubing is designed for use with all Mur-lok and John Guest push connect fittings. Mur-lok polyethylene tubing offers excellent pressure and temperature ratings and has outstanding…

    $0.89 Regular Price: $
    Choose Options

    …your own resin Stop throwing away good resin Triple TDS Meter already installed Perfect for adding additional DI stages to your RO system Includes 5 Feet of RO Tubing ¼" Push Connect Fittings Why Single Bed Resins? Using single bed resins will give you the ability to use 100% of the resin…

    $89.99 Regular Price: $

    …they meet the standards for drinking water. This certification also ensures that Mur-lok tubing can be easily incorporated into any NSF certified drinking water system with minimal paperwork and minimal, if any, re-testing. Specifications Standard 3/8" (OD) tube for RO systems(Sold by the foot)

    $0.59 Regular Price: $
    Choose Options

    …supply to the RO unit for maintenance simply close the ball valve. John Guest Angle Stop Valve " " Male Thread x " Female Thread " Quick Connect Ball Valve for " RO tubing John Guest Angle Stop Valve ¼" " Male Thread x " Female Thread ¼" Quick Connect Ball Valve for ¼" RO tubing

    $10.49 Regular Price: $
    Choose Options

    …Push connect fittings need the tubing to go in straight or a leak may be possible. Tube clips keep the collet on the fitting locked out to hold the tube into the fitting to help prevent leaks. Anytime you have a tight bend going into a fitting we highly recommend tube clips for safety. Available in…

    $0.19 Regular Price: $
    Choose Options

    Drain Saddle Clamps directly plumb the waste water line from RO systems to a sinks drain pipe. Two Configurations Available 1/4" Push Connect 3/8" Push Connect Specifications 1/4" hole needed for 1/4" drain saddle clamp 3/8" hole needed for 3/8" drain saddle clamp Max pipe diameter 1.5" Sch 40 PVC…

    $4.99 Regular Price: $
    Choose Options

    …filter. Keep sediment out of your Aquatec Booster pump with the DMFit Filter Strainer. 100 Mesh (150 Micron) Compatible with standard-sized tubing Available in 2 Sizes: 3/8" x 3/8" or 1/4" x 1/4" Max Operating Pressure: 170psi Compatible with 1⁄4" Aquatec 8800 Booster Pump & 3⁄8"…

    $8.99 Regular Price: $
    Choose Options

    Keep your RO tubing secure with Tube Mounting Clips! Hold up to two tubes with each mounting clip and secure them to a wall, stud, or any other rigid location. Keeping the plumbing for your RO system clean and tidy looks good, but also makes maintenance much easier and diagnosing issues quicker. The…

    $5.49 Regular Price: $
    Choose Options

    …tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of drinking water R.O. water production, reducing wastewater by up to 80%. In other words, if your current system requires 10 gallons of tap water to produce a gallon of…

    $59.99 Regular Price: $

    …Dimensions:3.15"L x 2.34"W x 3.45"H Input Voltage: 110V Vertical Head Pressure: 18 FT Tubing Connections: 1/4" OD push connect* *Accepts 1/4" RO Tubing. Will also accept 1/4" stem x barb adapter for connection to soft tubing. What's Included? 4x Versa Persistaltic Dosing Pump Versa Base Station…

    $599.99 Regular Price: $
    Out of Stock

    …x " Female Thread " Quick Connect Ball Valve for " RO tubing Polypropylene construction NSF Standard 58 Certified Mur-lok EZ Angle Stop Adapter Kit ¼" " Male Thread x "Female Thread ¼" Quick Connect Ball Valve for ¼" RO tubing Polypropylene construction NSF Standard 58 Certified

    $13.99 Regular Price: $
    Choose Options

    …recommend this? RO Tube Cutters are one of the secrets to working with RO tubing and making it much easier. They give a perfect cut every time and we won’t even attempt cutting RO tubing with a razor blade because they always leave a deformation in the tubing. A single RO tube cutter is good…

    $5.99 Regular Price: $

    …for quick and easy dispensing of the tube. Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most reverse osmosis systems the blue tubing will start immediately after the membrane. Make sure to pick up an RO Tubing Cutter for easy and clean cuts every time!…

    $99.99 Regular Price: $

    …x 14" 10" x 6.25" x 14" 10" x 6.25"x 14" Recommended Minimum Water Pressure 50-80 psi 50-80 psi 65-80psi 65-80psi Tubing Size 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing 1/4" RO Tubing Water pressure can be increased by adding a booster pump before your RO/DI system. Low pressure may cause the RODI…

    $289.99 Regular Price: $
    Choose Options

    …saltwater aquarium line of RO systems. Diverter valves are great when you want to leave your RO unit plumbed in. They fit most standard faucets and can be adapted using an adapter ring (not included) if an oddball faucet is encountered. Faucet Connection - 55/64 - 27 RO Tube Connection - 1/4"…

    $10.99 Regular Price: $

    …Restrictor for 75 GPD RO Systems - 550mL/min Recommended Flow Restrictor for 100 GPD RO Systems -800mL/min What's Included? Dow RO Membrane 2x 2.5" x 2.5" membrane clips 2x 1/8" x ¼" 90-degree elbows 1/8" x ¼" 90° check valve RO membrane housing ¼" tube splitter 5 Feet of…

    $59.99 Regular Price: $
    Choose Options

    …1/4" 3/8" Male Thread x 3/8" Female Thread 1/4" Quick Connect for 1/4" RO tubing Polypropylene construction NSF Standard 58 Certified Mur-lok EZ Angle Stop Adapter 3/8" 3/8" Male Thread x 3/8" Female Thread 3/8" Quick Connect for 3/8" RO tubing Polypropylene construction NSF Standard 58 Certified

    $4.99 Regular Price: $
    Choose Options

    …cartridge and resin. Compatible with: BRS 4 Stage Value RO/DI Systems BRS 4 Stage Value Plus RO/DI Systems Uses 1/4" Mur-lok Polyethylene RO Tubing Whats Included? 2x Single Add-On Canister 1x 6 Stage Deluxe Filter Kit 1x Refillable Cartridge for Deionization Resin 2x Single Cartridge Refill…

    $99.99 Regular Price: $
    Choose Options

    …for 1-300 mL Dimensions:3.15"L x 2.34"W x 3.45"H Input Voltage: 110V Vertical Head Pressure: 18 FT Tubing Connections: 1/4" OD push connect* *Accepts 1/4" RO Tubing. Will also accept 1/4" stem x barb adapter for connection to soft tubing. What's Included? Versa Persistaltic Dosing Pump Power Supply

    $149.99 Regular Price: $
    Out of Stock

    …items that use 1/4" tubing. The solenoid valves uses the 24V accessory port found on 1Link modules and the EnergyBar 832. Solenoid Valve (SV-1) This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical…

    $29.95 Regular Price: $

    Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. We believe GA Murdock Mur-lok fittings to be the best so strongly that we use them virtually exclusively on each of our BulkReefSupply.com reverse osmosis and BRS media reactors. These…

    $3.49 Regular Price: $

    …out of your system. The 3/8” fittings provide less back pressure if you require long runs of tubing. This booster pumps requires a transformer which is sold separately. If your RO system has an auto shut off kit or you are planning on installing one the Aquatec PSW Pressure Switches…

    $109.99 Regular Price: $
    Choose Options