Probe Holder

SORT:
VIEW: 32/64
60 items found. Showing items 1 to 32 .

    …easiest probe holders to use, and maintain. Thumb screws are a thing of the past with the magnetically coupled, padded probe and dosing tube holder. A single CustomCradle can hold probes, top off tubing, and dosing tubing all in one probe holding device. Probe holders will organize your probes from…

    $33.14 Regular Price: $38.99

    …easiest probe holders to use, and maintain. Thumb screws are a thing of the past with the magnetically coupled, padded probe and dosing tube holder. A single CustomCradle can hold probes, top off tubing, and dosing tubing all in one probe holding device. Probe holders will organize your probes from…

    $18.69 Regular Price: $21.99

    …designed a Magnetic probe rack that will hold up to 4 probes with one hole being slightly over-sized to hold those larger probes like the Neptune temp probe. By simply placing the MPR in your sump or tank, you can now securely hold all your probes in a single spot. If a probe is left loose their is…

    $39.95 Regular Price: $

    …In-Line Probe Holder comes with 4 probe holder ports with compression fittings to ensure a water-tight fit. Also included are plugs for any unused ports. The supplied probe fittings will accept most standard probes, such as pH probes, ORP probes and conductivity probes. The In-Line Probe Holder can…

    $119.99 Regular Price: $

    …magnetic probe holder for reef hobbyists! The AquaMaxx Probe Holder is constructed of high quality cell-cast acrylic and utilizes powerful rare-earth magnets that work on aquariums as thick as 1/2". Features two smaller holes for pH/ORP probes and two larger holes for larger-diameter probes; such as…

    $16.99 Regular Price: $

    probe holders you can have the water that is going to feed your tank run through probes right before it enters the tank. The probe holder fitting it will screw directly into 1/2" Female NPT threads for a leak-free connection. Note: Neptune Apex temperature probes will not work with the probe holder

    $25.99 Regular Price: $

    …requirements for different protein skimmers. Probe Holder All RUBY sumps come with a probe holder that can hold up to three probes. The holes are 0.63” in diameter. Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the filter sock from falling out…

    $378.99 Regular Price: $

    …water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and…

    $529.99 Regular Price: $
    Out of Stock

    …brace design also features test probe and dosing tube holders to make the aquarium system complete. Features Compact and robust hang-on design Full top brace support Spacious chamber design for refugium, segregation or acclimation purposes Probe and dosing tube holders Full cast acrylic for extra…

    $144.99 Regular Price: $

    …location of the foam block sponge filter with respect to the sump water height. Probe Holder All Sapphire sumps come with a probe holder that can hold up to four probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.

    $619.99 Regular Price: $

    …filter sock with a clear removable lid. The Alpha-Fuge Refugium Sump features a large protein skimmer compartment with dosing tube and a probe holder cradles. In addition, Alpha-Fuge sumps feature a large return pump compartment with built in water level ATO float valve and a hang on multi-purpose…

    $549.98 Regular Price: $

    …refugium for additional nutrient reduction and to culture live foods for your reef aquarium.The HF-M also features a built-in probe holder (for up to 3 probes), a dosing tube holder and cut-outs on the lid to run your cords and tubes though. The well-throughout design eliminates all the clutter and…

    $229.99 Regular Price: $
    Out of Stock

    …Helio 500 1 85-125 gal 15.25 inches 700W Helio 700 2 100-170 gal 11.25 inches 1000W Helio 1000 2 170-250 gal 15.25 inches IM Helio Owner's Manual Whats Included? Helio PTC Smart Heater Controller Helio PTC Heating Element Helio Remote Temperature Probe Magnetic Probe & Heating Element Holders

    $186.99 Regular Price: $219.99
    Choose Options

    Probe Rack Neptune has designed a Magnetic probe rack that will hold up to 4 probes with one hole being slightly over-sized to hold those larger probes like the Neptune temp probe. By simply placing the MPR in your sump or tank, you can now securely hold all your probes in a single spot. If a probe

    $1,969.64 Regular Price: $
    Choose Options

    …filter sock with a clear removable lid. The Alpha-Fuge Refugium Sump features a large protein skimmer compartment with dosing tube and a probe holder cradles. In addition, Alpha-Fuge sumps feature a large return pump compartment with built in water level ATO float valve and a hang on multi-purpose…

    $599.98 Regular Price: $

    …The differences when compared to the equivalent RUBY sump: Same or slightly smaller dimensions All clear material instead of the RUBY red No probe holder Dual Platforms CRYSTAL SUMP models come with dual platforms in the space before the return section. The top platform comes with a foam block…

    $339.99 Regular Price: $

    …water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and…

    $279.99 Regular Price: $

    …Simplified inlet and outlet designs also improve efficiency. The unique pump baffle enclosure helps to minimize noise. With a built-in a pH probe holder, you can easily keep an eye on the pH inside the calcium reactor with a pH monitor or control the CO2 with a pH controller. A CO2 recovery system…

    $349.99 Regular Price: $

    …as adjustable baffles with holders and a built-in ATO reservoir, Ice Cap sumps have the features you need with nothing you don’t. Features Solid acrylic construction Dedicated protein skimmer (and/or reactor) chamber Adjustable baffles with built-in probe holders Dedicated return pump chamber…

    $335.99 Regular Price: $
    Out of Stock

    …Slip x Slip (dual) Return Bulkhead: 1" Slip x Slip Filter Sock Holder: 4" Diameter Lid/Splash Guard(s): 5.75" x 10" (return) and 8.9" x 4.5" (drain) Adjustable Water Level: 6" - 10" Reversible Weir (Flat or Toothed) Probe Holders: 4 (3x 1/2" diameter and 1x 3/4" diameter) Cable Grommet: 1.5" What's…

    $1,604.98 Regular Price: $
    Choose Options

    …water flow operation design Interchangeable floss filter box and filter sock holder (filter sock included) Removable heater holder, test probe holder and dosing holes included Removable auto-top-off float valve holder Water level adjustable (5”-12”) in protein skimmer, refugium and…

    $339.99 Regular Price: $

    …Slip x Slip (dual) Return Bulkhead: 1" Slip x Slip Filter Sock Holder: 4" Diameter Lid/Splash Guard(s): 5.75" x 10" (return) and 8.9" x 4.5" (drain) Adjustable Water Level: 6" - 10" Reversible Weir (Flat or Toothed) Probe Holders: 4 (3x 1/2" diameter and 1x 3/4" diameter) Cable Grommet: 1.5" What's…

    $864.99 Regular Price: $

    …brace design also features test probe and dosing tube holders to make the aquarium system complete. Features Compact and robust hang-on design Full top brace support Spacious chamber design for refugium, segregation or acclimation purposes Probe and dosing tube holders Full cast acrylic for extra…

    $164.99 Regular Price: $

    …respect to the sump water height. Probe Holder All Sapphire sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes. Hose Holder All Sapphire sumps also come with 4…

    $470.99 Regular Price: $

    …as adjustable baffles with holders and a built-in ATO reservoir, Ice Cap sumps have the features you need with nothing you don’t. Features Solid acrylic construction Dedicated protein skimmer (and/or reactor) chamber Adjustable baffles with built-in probe holders Dedicated return pump chamber…

    $230.99 Regular Price: $

    …requirements for different protein skimmers. Probe Holder All RUBY sumps come with a probe holder that can hold up to three probes. The holes are 0.63” in diameter. Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the filter sock from falling out…

    $358.99 Regular Price: $

    …hole sizes. Probe Holder/Hose Inputs Keep your probes and dosing tubings secure. Hold up to 4 probes in the skimmer section of the sump in the preinstalled probe holder. Each hole is countersunk to keep probes from falling through and one is enlarged to fit a Neptune temperature probe. Installing an…

    $599.99 Regular Price: $

    …filter sock with a clear removable lid. The Alpha-Fuge Refugium Sump features a large protein skimmer compartment with dosing tube and a probe holder cradles. In addition, Alpha-Fuge sumps feature a large return pump compartment with built in water level ATO float valve and a hang on multi-purpose…

    $419.98 Regular Price: $

    …Reactor from Reef Octopus. Rated for aquariums up to 150 gallons Reverse flow and CO2 recirculating design Aquatrance 1200 Pump pH probe holder included (probe sold separately) A calcium reactor is used to maintain a balanced amount of calcium and alkalinity in your reef tank. In order to use…

    $314.99 Regular Price: $

    …Rated for aquariums up to 1000 gallons Reverse flow and CO2 recirculating design Water Blaster Blaster 5000 Recirculation Pump pH probe holder included (probe sold separately) A calcium reactor is used to maintain a balanced amount of calcium and alkalinity in your reef tank. In order to use…

    $839.99 Regular Price: $
    Out of Stock

    Probe Rack Neptune has designed a Magnetic probe rack that will hold up to 4 probes with one hole being slightly over-sized to hold those larger probes like the Neptune temp probe. By simply placing the MPR in your sump or tank, you can now securely hold all your probes in a single spot. If a probe

    $2,569.55 Regular Price: $
    Choose Options

    …Dimensions - 15.2" L x 10.6" W x 23" H Controllable DC Powered VarioS 4 Pump Reverse Flow and CO2 Recirculation Design Auto Fill Bubble Counter Probe Holder Easy to Remove Lid Effluent Control Valve 1/4" Push Connect Fittings Internal or External Application Neptune Apex Ready Perfectly dial in your…

    $629.99 Regular Price: $
    Out of Stock