Probe

SORT:
VIEW: 32/64
213 items found. Showing items 1 to 32 .

    Probe – Lab Grade Start measuring salinity in your tank and get alerts when it is out of range. Replace an old probe Add salinity monitoring to your system via the Salinity Module: PM2 Start measuring salinity in your tank and get alerts when it is out of range. Replace an old probe Add…

    $197.95 Regular Price: $

    Long-life Temperature Probe - replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings.

    $32.95 Regular Price: $

    Lab Grade Dissolved Oxygen Probe for Neptune PM3 Module. The price of the probe isn't all that cheap compared to the traditional probes we use in this hobby, but this probe can easily last you a lifetime because the actual sensing membrane is replaceable. About every 3 months you will need to…

    $749.95 Regular Price: $

    …magnetic probe holder for reef hobbyists! The AquaMaxx Probe Holder is constructed of high quality cell-cast acrylic and utilizes powerful rare-earth magnets that work on aquariums as thick as 1/2". Features two smaller holes for pH/ORP probes and two larger holes for larger-diameter probes; such as…

    $21.24 Regular Price: $24.99

    …designed a Magnetic probe rack that will hold up to 4 probes with one hole being slightly over-sized to hold those larger probes like the Neptune temp probe. By simply placing the MPR in your sump or tank, you can now securely hold all your probes in a single spot. If a probe is left loose their is…

    $44.95 Regular Price: $

    …1x Internal) Whats Included? 1x ProfiLux 4 controller, Black 1x ProfiLux 4 power supply 1x Water temperature sensor 1x pH probe 1x Redox/ORP probe 1x Conductivity probe 1x Powerbar 6E-PAB with PAB-cable 2m 1x pH Calibration Fluids (pH 7 & 9) 1x Conductivity Calibration Fluid 1x Redox/ORP…

    $949.90 Regular Price: $

    …Cord BRS Lab Grade ORP Probe Features: Double Junction Probe: A double junction probe has a second seal and junction found at the center of the probe. The double junction design adds to the cost and complexity of the probe but they are recommended in instances where the probe will come in contact…

    $63.74 Regular Price: $74.99

    Probe Rack Neptune has designed a Magnetic probe rack that will hold up to 4 probes with one hole being slightly over-sized to hold those larger probes like the Neptune temp probe. By simply placing the MPR in your sump or tank, you can now securely hold all your probes in a single spot. If a probe

    $2,846.45 Regular Price: $

    …Cord BRS Lab Grade pH Probe Features: Double Junction Probe: A double junction probe has a second seal and junction found at the center of the probe. The double junction design adds to the cost and complexity of the probe but they are recommended in instances where the probe will come in contact…

    $56.09 Regular Price: $65.99

    …In-Line Probe Holder comes with 4 probe holder ports with compression fittings to ensure a water-tight fit. Also included are plugs for any unused ports. The supplied probe fittings will accept most standard probes, such as pH probes, ORP probes and conductivity probes. The In-Line Probe Holder can…

    $131.99 Regular Price: $

    …pH Probe is compatible with any monitor or controller with a BNC style connection. If you just need to replace your worn out probe or add another you will not be disappointed with the double junction feature of these probes. Most probes have a single chamber to house the actual reference probe and…

    $89.95 Regular Price: $

    …10” This feature is to accommodate for the water height requirements for different protein skimmers. Probe Holder All RUBY sumps come with a probe holder that can hold up to three probes. The holes are 0.63” in diameter. Locking Filter Sock Holder Filter socks snap and lock into the…

    $419.99 Regular Price: $

    …sump, if your water level ever goes that high, an alarm will sound and your PMUP will stop operating. Optional leak detection probes. Insert one of our leak detection probes into port-3 on the FMM and then place it near your sump. Now, if for some reason your sump should ever overflow, your ATK will…

    $224.95 Regular Price: $

    Keep your GHL Profilux controller working in top condition and replace your Conductivity probe if it becomes damaged or fails to hold calibration. Sensors are items that wear out during normal use. The lifespan of a sensor is dependent on the environment and operation conditions, but a life span of…

    $196.90 Regular Price: $

    Add the pH/ORP Probe Expansion Module to your Apex Neptune System. Module has extra Temp Probe port I/O Switch Inputs for ATO, feed buttons, leak alarms, etc. Monitor multiple tanks Galvanic Isolation for accurate and reliable probe readings Features of the Neptune Systems pH/ORP Expansion Module:…

    $89.95 Regular Price: $

    …easiest probe holders to use, and maintain. Thumb screws are a thing of the past with the magnetically coupled, padded probe and dosing tube holder. A single CustomCradle can hold probes, top off tubing, and dosing tubing all in one probe holding device. Probe holders will organize your probes from…

    $42.99 Regular Price: $

    …just seconds. Probe Holder/Hose Inputs Keep your probes and dosing tubings secure. Hold up to 4 probes in the skimmer section of the sump in the preinstalled probe holder. Each hole is countersunk to keep probes from falling through and one is enlarged to fit a Neptune temperature probe. Installing…

    $544.99 Regular Price: $

    A universal, versatile & stylish solution for securely organizing dosing lines and temperature probes Holds 6-12 dosing lines Also accommodates temp probes from Hydros, BRS, & Inkbird Firmly holds soft and rigid tubing without restricting flow Can withstand water hammer effects of high speed…

    $39.98 Regular Price: $

    …in your sump, prefilter or aquarium. 2. Remove the white nylon nut from the threaded probe. 3. Insert the probe through the hole. Be sure to have the silicon ring on outside wall. 4. Tighten the nut onto the inside wall over the probe. Be sure seal is tight. IceProbe Small Aquarium Chiller Manual

    $159.99 Regular Price: $

    …conductivity probe, leading to inconsistent and unreliable results.Vivid Creative Aquatics has tackled this problem head on with theirSalinity Probe Stability Kit. The "SPS" Kit is carefully designed to create just the right amount of water movement and constant pressure around the probe to provide…

    $23.76 Regular Price: $27.95

    …Inbuilt Fleece Roller Mat Skimmer chamber with adjustable baffle Media/Refugium chamber Return pump chamber Silencer chamber with access lid Probe holder Twin Heater Mount Twelve dosing inputs Recessed lids with cable cutouts Quick-connect bulkhead/union inlets and outlets Inbuilt LED lighting…

    $2,499.99 Regular Price: $

    …Slim Temperature Sensor Probe is completely submersible so you can easily place it somewhere discreet, like in the back of an all-in-one aquarium, in the overflow, or tucked away in one of the chambers of your sump. Specifications Probe Dimensions: 1.6 x .32 Probe Connection Type: GX12…

    $24.99 Regular Price: $

    …10 Ft cord BRS Lab Grade pH Probe Features: Single Junction Probe: Single junction probes are used widely for their reliability and economical pricing. In a perfect world we would always recommend double junction probes, but in many cases, single junction probes will last just as long, but they…

    $38.99 Regular Price: $

    …Solenoids to control reverse osmosis systems Probe Port One of the most remarkable ports on the HYDROS Control 4 is the Probe Port. The Control 4 includes two Probe ports which can be connected to an ORP or pH probe, but these are no ordinary probe inputs! The circuitry is based on an…

    $449.99 Regular Price: $

    …Inbuilt Fleece Roller Mat Skimmer chamber with adjustable baffle Media/Refugium chamber Return pump chamber Silencer chamber with access lid Probe holder Twin Heater Mount Twelve dosing inputs Recessed lids with cable cutouts Quick-connect bulkhead/union inlets and outlets Inbuilt LED lighting…

    $2,499.99 Regular Price: $

    …necessary to judge the quality and performance of the system. The meter includes, easy to use, push connect fittings that will let you place each probe in-line with 1/4” RO tubing. Specifications: Range: 0-9990 µS Dual Range – Measures from 0-999 µS, with a resolution of 1…

    $59.95 Regular Price: $

    …is 0.1 °C/F Accuracy: +/- 2% EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user. Probe: Detachable platinum electrodes Housing: IP-67 Waterproof (submersible; floats) What’s Included? COM-100 EC/TDS Meter Pen Translucent Cap…

    $76.95 Regular Price: $

    …Reactor from Reef Octopus. Rated for aquariums up to 150 gallons Reverse flow and CO2 recirculating design Aquatrance 1200 Pump pH probe holder included (probe sold separately) A calcium reactor is used to maintain a balanced amount of calcium and alkalinity in your reef tank. In order to use…

    $369.99 Regular Price: $

    …investing in the PM2 module and salinity probe. Add the Salinity Module: PM2 to your Apex Neptune System. Real-time monitoring of salinity in reef aquarium Module has extra Temp Probe port I/O Switch Inputs for ATO, feed buttons, leak alarms, etc. Probe Sold Separately. Features of the Neptune…

    $89.95 Regular Price: $

    …solution for securely organizing controller probes and water lines Accommodates probes from Apex, Hydros, GHL, Milwaukee, Pinpoint, BRS, & Inkbird Also ideal for Auto Top Off (ATO) and Auto Water Change (AWC) lines Holds up to 4 standard probes and 3 dosing lines Firmly holds soft and rigid…

    $39.98 Regular Price: $

    …pH levels in an aquarium. This pH controller controls pH in an upward and downward direction. With proper care, this Pinpoint pH Controller should last a lifetime. Pinpoint pH Controller Features: Includes probe and calibration fluids Excellent for calcium reactor setups Available for 110 VAC.

    $219.99 Regular Price: $

    …including but not limited to: Temperature probes Optical level sensors (Single & Dual) Capacitive non-contact liquid level sensors Rope leak detectors Point leak detectors Flow rate sensors Magnetic switches Push-button switches 2x Probe Ports -- The Probe Ports have circuitry based on an…

    $659.99 Regular Price: $
    Out of Stock
Sign Up Now