Pressure

  • PRODUCTS (121)
SORT:
VIEW: 32/64
121 items found. Showing items 1 to 32 .

    …Conditions: Minimum Water Pressure - 50 PSI Max Water Pressure - 90 PSI Recommended Water Temperature - 77°F Recommended Max TDS - <300ppm Water pressure can be increased by adding abooster pumpbefore your RO/DI system if a pressure increase is required. Low pressure will cause slow production…

    $254.99 Regular Price: $299.99
    Choose Options

    The Aquatec pressure switch is used to shut down the pump when the switch detects pressure build up caused from your holding container becoming full. Most often triggered with a float valve Your system must have a working auto shut off kit for this switch to work properly. ¼” Push…

    $16.99 Regular Price: $19.99

    …system to make on demand water when filling up a glass for drinking. A Pressure tank will store the filtered water under pressure and allow it to come out at a much greater speed saving you time. Reverse Osmosis Pressurized Tank 4 Gallon tank Holds approxamately 3.2 gallons of water. Reverse Osmosis…

    $42.49 Regular Price: $49.99

    Useful if your homes water pressure is dangerously high. Series P60 Miniature Plastic Water Pressure Regulators are used in general purpose and OEM applications to regulate the pressure in systems that require a constant downstream and accurate flow performance. It consists of a thermoplastic body…

    $76.49 Regular Price: $89.99

    pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops apparent which can tell you that sediment and carbon blocks need to be changed. Glycerin filled pressure gauges absorb vibration and pressure

    $17.42 Regular Price: $20.49

    …reverse osmosis package include our 5 Stage RO unit complete with a pressurized water tank, drinking water faucet, inline carbon filter and all the necessary fittings to install. Drinking Water Features: 3.2 gallon pressurized water tank Includes Silver drinking air gap water faucet All necessary…

    $220.99 Regular Price: $259.99
    Choose Options

    …system! Features The high & low pressure safety cutoff switch Improved rejection and production rates Built-in internal automatic flush valve Built-in check valve Buddie Fit press-fittings Sealed pressure pump Fast & Easy installation Increase water pressure up to 90 PSI Rated for systems up…

    $116.44 Regular Price: $136.99

    …If your RO system has an auto shut off kit or you are planning on installing one the Aquatec PSW Pressure Switches (sold separately) is also required. Benefits of maintaining higher water pressures Improved waste water ratio Improved membrane rejection performance Reduced DI resin consumption…

    $84.99 Regular Price: $99.99
    Choose Options

    …unit. Low water pressure is a leading cause of poor RO system performance. A pressure gauge assures that proper pressure is being supplied. It will also make pressure drops apparent which can tell you that sediment and carbon blocks need to be changed. This air filled pressure gauge comes assembled…

    $11.04 Regular Price: $12.99

    …a long cylindrical shape. 3. Locate your product water line and place the pressure switch anywhere after the system's auto shut off valve (ASOV), we suggest placing it directly after the ASOV. 4. Connect the Pressure Switch Molexconnectors into the Power Supply and also the auto flush flow…

    $91.37 Regular Price: $107.49
    Choose Options

    …makes it the most commonly used 100 GPD membrane used in the aquarium industry. If you require slightly faster water production and have good water pressure this is one of the better options. TIP -Brand new membranes will have a slight coating on them to help preserve the membrane until it is ready…

    $44.19 Regular Price: $51.99

    …8800 Booster Pump - all in one kit. It also includes the pressure switch so it will work with reverse osmosis units that are set-up to shut off automatically. ¼” Push Connect fittings. Benefits of maintaining higher water pressures Improved waste water ratio Improved membrane rejection…

    $130.47 Regular Price: $153.49
    Choose Options

    …the pressure tank. Almost all drinking water pressure tanks will have a standard male threaded nipple on the tank which allows water to enter and exit the tank. The RO Tank Shut Off Valve will let you turn the water feed on and off from the pressure tank. By simply screwing onto the pressure tank…

    $8.49 Regular Price: $9.99
    Choose Options

    Installation Instructions 1/4" Automatic shut off valves are used with float valves or pressurized tanks to shut off an RO system. It utilizes the back pressure created by the float valve or pressurized tank to shut off the water supply to the membrane. Without an automatic shut off valve waste…

    $8.49 Regular Price: $9.99

    …Conditions: Minimum Water Pressure - 65 PSI Max Water Pressure - 90 PSI Recommended Water Temperature - 77F Recommended Max TDS - <300ppm Water pressure can be increased by adding abooster pumpbefore your RO/DI system if a pressure increase is required. Low pressure will cause slow production…

    $55.24 Regular Price: $64.99
    Choose Options

    …Two year manufacturer’s warranty 1/4" Push Connect hose connections Includes Mounting Clip In situations with high back pressure (like those with a pressurized storage tank used for drinking water), these pumps dramatically improve the efficiency of R.O. water production, reducing wastewater…

    $54.39 Regular Price: $63.99
    Choose Options

    Check valves only allow water to flow one direction. 1/8" Male NPT x 1/4" Push Connect elbow check valves are typically used on the product water output of RO membrane housings to protect from back pressure and allow auto shut off valves to operate correctly.

    $3.56 Regular Price: $4.19

    …drain (i.e. no electricity required), the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of drinking water R.O. water production, reducing wastewater by up to 80%. In…

    $50.99 Regular Price: $59.99

    …If you require faster water production and have good water pressure this is one of the better options.BRS generally recommends the use of the 75 GPD DOW membranes because it offers 98% rejection at easier to obtain water pressures. The higher rejection will result in better quality water and…

    $54.39 Regular Price: $63.99

    …Rate: 230 GPH Circulation Flow Rate: 1000 GPH Max Head Pressure: 4 Ft 10 Watts Inlet: fits 3/4" ID tube Outlet: fits 1/2 tube Pump Dimensions: 3.25" x 3.5" x 2" NOTE:This pump is not intended for use with a reactor or other back pressure situations as it will be significantly louder than in other…

    $27.19 Regular Price: $31.99

    …with fast release and re-attachment Built-in hex allen wrench Capable of exherting more pressure than a thumbscrew Swivels around ball joint for easy positioning Repeatable clamping pressure Wide head for pressure disbursement Eliminates shear force on gaskets Perfect for cramped spaces Adjustable…

    $9.98 Regular Price: $

    …acrylic can handle in most cases. By placing a single sheet of Neoprene Foam in-between the tanks glass/acrylic and stand, that will dampen any pressure points to make a level and even surface for the tank to rest on. 1/8 inch thick Closed Cell Neoprene Foam Easily cuts with razor blade for a…

    $28.04 Regular Price: $32.99
    Choose Options

    …Conditions: Minimum Water Pressure - 50 PSI Max Water Pressure - 90 PSI Recommended Water Temperature - 77F Recommended Max TDS - <300ppm Water pressure can be increased by adding a booster pump before your RO/DI system if a pressure increase is required. Low pressure will cause slow production…

    $229.49 Regular Price: $269.99

    …Conditions: Minimum Water Pressure - 65 PSI Max Water Pressure - 90 PSI Recommended Water Temperature - 77F Recommended Max TDS - <200ppm Water pressure can be increased by adding a booster pump before your RO/DI system if a pressure increase is required. Low pressure will cause slow production…

    $263.49 Regular Price: $309.99

    …balloon as pressure built up in the tubing until the crack pressure was overcome. When pressure builds in the tubing because of a high crp rating of the valve, this can often cause a larger release of CO2 than intended. Then it releases, builds up again, and continues this cycle of pressure buildup.…

    $18.99 Regular Price: $21.99

    …is displayed on the LDC monitor. Glycerin Filled Pressure Gauge- Reverse Osmosis membranes require a particular amount of pressure to operate efficiently, and using a pressure gauge will help ensure your system is performing correctly. Pressure Gauges also work as a great indicator of when sediment…

    $237.99 Regular Price: $279.99
    Choose Options

    …Conditions: Minimum Water Pressure - 50 PSI Max Water Pressure - 90 PSI Recommended Water Temperature - 77F Recommended Max TDS - <300ppm Water pressure can be increased by adding a booster pump before your RO/DI system if a pressure increase is required. Low pressure will cause slow production…

    $147.04 Regular Price: $172.99

    …Conditions: Minimum Water Pressure - 50 PSI Max Water Pressure - 90 PSI Recommended Water Temperature - 77F Recommended Max TDS - <500ppm Waste to Product Water Ratio - 3:1 Water pressure can be increased by adding abooster pumpbefore your RO/DI system. Low pressure may cause the RODI system to…

    $237.99 Regular Price: $279.99

    …are super strong and include pre-drilled wall mounting holes (screws not included). Works with 2.5" x 10" RO Canisters Compatible With Many Different Brands Pre-Drilled for a Pressure Gauge Durable White Finish Strong & Sturdy What's Included? 1x Triple RODI Bracket for 10" Canisters (U-Style)

    $9.77 Regular Price: $11.49

    …Replacement filters for BRS 3 Stage Space Saver RO System (legacy model) Omnipure Inline Carbon Block Specs: Micron Rating - 1 micron Flow Rate - 0.5 GPM Max Temperature - 100 F Max Pressure - 125 PSI Max Service Life - 1 Year Dimensions - 10" x 2" Connections - 1/4" Push connect Owners Manual

    $15.72 Regular Price: $18.49

    …filter is sometimes used as a prefilter on RO booster pump installations Omnipure Inline Sediment Filter Specs: Micron Rating - 5 micron Flow Rate - 0.5 GPM Max Temperature - 100 F Max Pressure - 125 PSI Max Service Life - 1 Year Dimensions - 10" x 2" Connections - 1/4" Push connect Owners Manual

    $15.29 Regular Price: $17.99

    The Eheim air diffuser mixes the supplied air flow with return water which is injected under the surface of the water by the pressure of the filter pump. The Eheim diffuser is mounted at the end of the outlet hose close to the surface of the water and is fixed on the tank wall to create an injection…

    $5.94 Regular Price: $6.99
    Out of Stock
Sign Up Now