Pressure

  • PRODUCTS (27)
SORT:
VIEW: 32/64
27 items found. Showing items 1 to 27 .
  • 1

    …system to make on demand water when filling up a glass for drinking. A Pressure tank will store the filtered water under pressure and allow it to come out at a much greater speed saving you time. Reverse Osmosis Pressurized Tank 4 Gallon tank Holds approxamately 3.2 gallons of water. Reverse Osmosis…

    $42.49 Regular Price: $49.99

    …makes it the most commonly used 100 GPD membrane used in the aquarium industry. If you require slightly faster water production and have good water pressure this is one of the better options. TIP -Brand new membranes will have a slight coating on them to help preserve the membrane until it is ready…

    $44.19 Regular Price: $51.99

    …Rate: 230 GPH Circulation Flow Rate: 1000 GPH Max Head Pressure: 4 Ft 10 Watts Inlet: fits 3/4" ID tube Outlet: fits 1/2 tube Pump Dimensions: 3.25" x 3.5" x 2" NOTE:This pump is not intended for use with a reactor or other back pressure situations as it will be significantly louder than in other…

    $27.19 Regular Price: $31.99

    …acrylic can handle in most cases. By placing a single sheet of Neoprene Foam in-between the tanks glass/acrylic and stand, that will dampen any pressure points to make a level and even surface for the tank to rest on. 1/8 inch thick Closed Cell Neoprene Foam Easily cuts with razor blade for a…

    $28.04 Regular Price: $32.99
    Choose Options

    …socket, and then your pump into the Smart AC Socket. This is the perfect accessory for any aquarium that may need a pump that produces higher head pressure or a faster flow rate. Compatible with: AutoAqua Smart ATO AutoAqua Smart ATO Micro AutoAqua AWC Specifications: Power Input/Output - 110V AC @…

    $33.00 Regular Price: $

    …Rate: 295 GPH Circulation Flow Rate: 1300 GPH Max Head Pressure: 6 Ft 20 Watts Inlet: fits 3/4" ID tube Outlet: fits 1/2 tube Pump Dimensions: 3.25" x 3.5" x 2" NOTE:This pump is not intended for use with a reactor or other back pressure situations as it will be significantly louder than in other…

    $29.74 Regular Price: $34.99

    …rejection rate Extended membrane life 1/4" hose push connections Hermetically protected electronics for long life Installation Note: Aquatec 8800 Pressure Switch & Aquatec 8800 Power Supply required for installtion. An Auto-Flush Flow Restrictor will assist the RO membrane to perform with…

    $46.74 Regular Price: $54.99
    Choose Options

    …75 GPD Membranes have a 96% - 99% typical stabilized salt rejection rate that can be reproduced through the following conditions; Source Water Pressure - 50 PSI / Membrane Source Water Temperature - 77F Source Water TDS - 250ppm Softened Tap Water Recovery - 15% Minimum Salt Rejection - 96% For…

    $34.42 Regular Price: $40.49

    …among the highest quality check valves to be found. Relative to other types and manufacturers of check valves, these valves create minimal pressure loss. They are commonly used on return pump outputs to prevent water overflowing the sump in the event of a power outage, pump failure or maintenance.…

    $31.02 Regular Price: $36.49
    Choose Options

    …for buckets, siphons, or mess with the Python No Spill Clean & Fill Gravel Cleaner. With just turning on your faucet, your household water pressure to pull water out of aquariums through a venturi effect. Features: Metal connection to faucet Saves time No siphon needed or buckets to empty…

    $46.74 Regular Price: $54.99
    Choose Options

    …Freshwater Auto-Top-Off (ATO) ATO will likely be the most popular use for this pump. And unlike many wimpy pumps out there, the PMUP has enough pressure to push water up 14 feet vertically, it can even move the water up from one floor below. This means you could put your RO water storage in your…

    $44.95 Regular Price: $

    …tubing High quality ball valve for precise tuning Ability to run carbon and GFO at the same time 1/2" fittings and ports throughout reduce head pressure and provide ample flow rates Holds three cups of carbon (Approx. 300g) or two cups of GFO (Approx 290g) Dimensions: 14"H x 8.5"W x 5.5" Sicce…

    $46.74 Regular Price: $54.99
    Choose Options

    …tubing High quality ball valve for precise tuning Ability to run carbon and GFO at the same time 1/2" fittings and ports throughout reduce head pressure and provide ample flow rates Holds 1/2 cup of carbon (Approx. 50g) and 1/4 cup of GFO (Approx. 35g) mix or 3/4 cup of only carbon (Approx 105g)…

    $38.24 Regular Price: $44.99
    Choose Options

    …architecturally sound aquascape. The natural rock top-side lets you place traditionalrocks on top of the foundation pieces without creating excess pressure points or strain on the base of the tank. If you are going to with a bare bottom tank the look the foundation rock gives is awesome and even if…

    $32.29 Regular Price: $37.99

    …reverse osmosis pretreatment applications and other filtered water applications. Up to twice the life of conventional depth filters Up to 50% lower pressure drop Up to 100% greater dirt holding capacity Superior SDI reduction Melt-bonded exterior ensures no media migration Provides lower total cost…

    $44.19 Regular Price: $51.99
    Choose Options

    …Filter Omnipure Inline Carbon Block We recommend changing sediment filters when they become visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three years…

    $28.04 Regular Price: $32.99
    Choose Options

    …Manufactured using FDA-compliant materials. We recommend changing sediment filters when they become visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three…

    $28.04 Regular Price: $32.99
    Choose Options

    …calcium and other elements in your aquarium water. Sensor Specifications Solenoid Type: Normally Closed Tubing Connection: Push-Connect Max Pressure: 0-0.7 MPA Plug Style: GX12 aviation-style connector Power Source: HYDROS Drive Port (No additional power cord is required) Whats Included? 1x…

    $29.99 Regular Price: $

    …Manufactured using FDA-compliant materials. We recommend changing sediment filters when they become visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three…

    $35.69 Regular Price: $41.99
    Choose Options

    …Manufactured using FDA-compliant materials. We recommend changing sediment filters when they become visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three…

    $43.34 Regular Price: $50.99
    Choose Options

    …Block Filter Omnipure Inline Carbon Block We recommend changing sediment filters when they become visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three years…

    $41.64 Regular Price: $48.99
    Choose Options

    …Block 1.25 lbs DI Resin - Color Changing We recommend changing sediment filters when they become visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three years…

    $49.29 Regular Price: $57.99
    Choose Options

    …Manufactured using FDA-compliant materials. We recommend changing sediment filters when they become visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three…

    $32.29 Regular Price: $37.99
    Choose Options

    …Carbon Block Filters We recommend changing sediment filters when they become visually dirty, or especially if there is a noticeable drop in pressure. Change carbon blocks should be replaced every 6-12 months depending on the volume of water being produced This kit does not include an RO membrane…

    $31.44 Regular Price: $36.99
    Choose Options

    …Block Last Stages - DI Resin Refills We recommend changing sediment filters when they become visually dirty or there is a noticeable drop in pressure. Change carbon blocks every 6-12 months depending on use. This kit does not include a membrane filter as they need replacement every three years…

    $48.44 Regular Price: $56.99
    Choose Options

    …string-wound or resin-bonded filters. We recommend changing sediment filters when they become visually dirty, or if there is a noticeable drop in pressure. Carbon Block BRS Universal Carbon Blocks are manufactured using high performance catalytic active carbon combined with a new binder system…

    $38.24 Regular Price: $44.99
    Choose Options

    …string-wound or resin-bonded filters. We recommend changing sediment filters when they become visually dirty, or if there is a noticeable drop in pressure. Carbon Block BRS Universal Carbon Blocks are manufactured using high performance catalytic active carbon combined with a new binder system…

    $37.39 Regular Price: $43.99
    Choose Options
  • 1
Sign Up Now