Neptune Apex Controller

  • PRODUCTS (17)
SORT:
VIEW: 32/64
17 items found. Showing items 1 to 17 .
  • 1

    The Apex and Apex EL Controllers from Neptune Systems are modular systems that allow you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect the Apex controller, modules, and Energy Bars together. Available in 3 Ft., 6 Ft., 15 Ft.…

    $10.95 Regular Price: $
    Choose Options

    Use the Kessil A360/A160 Neptune Apex Control Cable to connect your Kessil 360 (A360N/360W) or A160 LED lights to your Neptune Systems Apex controller. Specifications Type 1 - compatible with Neptune Systems Apex controllers Length: 6 Ft. (1800mm) without connectors Color: Black One End: 1/8"…

    $20.00 Regular Price: $

    Connect your Apex Controller from Neptune to up to two Tunze Stream pumps. It has 1 RJ45 connector which plugs into the Apex base unit and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.

    $20.95 Regular Price: $

    …a Neptune Systems Apex aquarium controller (rather than using an outlet) so you can remotely control the WaveEngine from Apex Fusion. This remote control capability is not limited to only Neptune Systems aquarium controllers. You can connect the WaveEngine to any third-party aquarium controller with…

    $12.99 Regular Price: $

    2 Channel Cable to connect two separate LED color channels from your 0-10V dimmable LED light to the Apex System or the Advanced LED Dimming Module – VDM. This cable has a RJ45 plug on one end and bare wires on the other that must be connected in the manner recommended by your LED…

    $15.95 Regular Price: $

    …Interface Modules, VarioS Controllers, and more. The 6.5 foot Y Module cable lets you connect two VarioS pump controllers or Gyre Interface Modules directly to a 0-10v controller like the Neptune Apex Controller. Connect your VarioS or Gyre pumps directly to any controller with a 0-10v port that…

    $15.59 Regular Price: $

    12v Power Supply for Neptune Apex Controllers applies power to the head unit If you have an Apex Controller, more than likely you are trying to protect against equipment failure, along with monitoring, and alarm capabilities that can notify you in the event when something is going wrong. The 12V…

    $15.95 Regular Price: $

    …your Apex to connect two 0-10v signals to a single IceCap Gyre Interface Module. When using the Neptune Apex with the Gyre Interface module it allows complete control over the pumps at any point throughout the day. With simple visible graphing through the Apex Fusion interface, controlling Gyre…

    $15.59 Regular Price: $

    …that is where you will need these extension cables. Available in two lengths: 15 Foot 30 Foot Note: AquaBus Cables are USB-type cables but Apex Systems does not have a USB interface. DO NOT plug into any computer or other USB device - severe damage may occur to your Apex or the device you connect.

    $21.95 Regular Price: $
    Choose Options

    …Supply lets you power up your PMUP pump without the need for a 24V port on an Apex Controller. This will let you use the PMUP with any other type of controller, timer, or manually control. This will also power the Neptune SV-1 For use with PMUP and other DC24v accessories Direct Replacement Part The…

    $22.95 Regular Price: $

    …10 Feet Long 4 Pin Male x Male Connection Now you no longer need the power supply or Aquabus cable for your DS Fluid Metering System. By having the Male x Male 4 pin cable you can now fully control the DS pump through your apex with just a single cable through the 1Link module or the EnergyBar 832.

    $21.95 Regular Price: $

    …Module from Neptune. The FS-25 will work with flow rates from 3-12 gph, and will connect to any standard 1/4" push connect tubing. Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate…

    $20.95 Regular Price: $
    Out of Stock

    …maintenance. Third Party Integration The HYDROS WaveEngine is compatible with 3rd party controllers such as the Neptune Systems APEX, the Reef Angel, GHL Profilux and others via the 0-10V control port. Control Pump Speeds Trigger Flow Mode Changes Splash Proof Enclosure The HYDROS WaveEngine is…

    $12.99 Regular Price: $

    …work on aquariums as thick as 1/2". Features two smaller holes for pH/ORP probes and two larger holes for larger-diameter probes; such as the Neptune Apex Temperature Probe. The unique box design with 3 contact points also ensure that the probes are ultra secure and upright when installed. Features…

    $21.24 Regular Price: $24.99

    …clean up any rough edges giving your board a custom look. Strong and Durable Easily Installation and Removal Clean Up Rough Saw Cuts Matches Neptune Apex Colors Custom Look Without The Cost 1.25" Cord Grommet Specifications: Hole Size Requirement - 1.25" or 32mm Inside Diameter - 1.1" Overall Flange…

    $11.99 Regular Price: $
    Choose Options

    …clean up any rough edges giving your board a custom look. Strong and Durable Easily Installation and Removal Clean Up Rough Saw Cuts Matches Neptune Apex Colors Custom Look Without The Cost 1.25" Cord Grommet Specifications: Hole Size Requirement - 1.25" or 32mm Inside Diameter - 1.1" Overall Flange…

    $11.99 Regular Price: $
    Choose Options

    …of space. CustomCradle Nano: Holds up to 3 probes and 2 dosing tubes Compatible with all temp, pH, conductivity and ORP probes including Neptune Apex Temperature Probe Magnetically mounts to Glass or Acrylic up to 8mm (0.30") The magnetic coupled, padded holder will allow you to easily maintain…

    $24.99 Regular Price: $
  • 1
Sign Up Now