Apex Neptune Power

SORT:
VIEW: 32/64
65 items found. Showing items 1 to 32 .

    …additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless. Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in…

    $289.95 Regular Price: $

    …with just a single skinny wire for all power and control (1LINK interface makes it a snap!) WAV Pump Requires: EnergyBar 832 or 1LINK Module with free 1LINK source port (not included) Apex, Apex Lite, or Apex Jr. (not included) Now with the WAV pump from Neptune, even more control is at the tip of…

    $184.95 Regular Price: $

    Power Supply for Neptune Apex Controllers applies power to the head unit If you have an Apex Controller, more than likely you are trying to protect against equipment failure, along with monitoring, and alarm capabilities that can notify you in the event when something is going wrong. The 12V Power

    $15.95 Regular Price: $

    …and a one-click-connection of a wire that carries not only the power for the device but two-way communication from it to your Apex. Setup is simple, click and go. Less wires, fewer configuration headaches, and best of all, less cost to you as a consumer! What's Included? 2x Neptune WAV Pumps

    $369.90 Regular Price: $
    Choose Options

    …SPECIFICATIONS Size (Approx.): 9.5 x 5 x 5 Weight (Approx.): 4 pounds Lift Height: 24 feet (minimum at MSL) Suction Height: 24 feet Flow Rate: Variable (0.1mL 250mL/min) Power Requirement: 110/120V or 220/24oV Requires: Apex, ApexEL, Apex Lite, or Apex Jr. Instructions: Neptune DOS Instructions

    $329.95 Regular Price: $

    …with your Apex in less than 15 minutes Empties used reagents and sample into an external vessel (not included) Up to one month of testing before reagents needchanging; based on 4-Alk, 2-Ca,2-Mg tests per day Note: Requires Neptune Apex or ApexELwith an open 1Link OR a 24V Power and Aquabus…

    $639.95 Regular Price: $
    Out of Stock

    …monitoring and much more! Set reminders, log testing and dosing information, and access your tank from anywhere with Apex Fusion! Just as powerful as the flagship Neptune Systems Apex Controller but at a much more affordable price. The ApexEL is a great entry into gaining full control over your…

    $559.95 Regular Price: $

    Do you need to add just a few more outlets? The Neptune Systems Energy Bar 4 is the perfect addition to any Apex Control System! Add additional control to your Apex Neptune Systems with the Energy Bar 4. This is NOT just a power strip. 4 Independently Controlled Outlets 3 rated at 8A@120V AC, 1…

    $119.95 Regular Price: $

    …additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless. Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in…

    $879.95 Regular Price: $

    …Multi-purpose Utility Pump (PMUP) Power Supply lets you power up your PMUP pump without the need for a 24V port on an Apex Controller. This will let you use the PMUP with any other type of controller, timer, or manually control. This will also power the Neptune SV-1 For use with PMUP and other DC24v…

    $22.95 Regular Price: $

    …Customize your Neptune Apex Controller with the I/O Breakout Box. Add float switches,magnet switches, or any other open/closed device. The Breakout box does not power any accessories, but lets you monitor the signal of the switch connected to it, and then you can program your Apex controller to…

    $44.95 Regular Price: $

    …will monitor the power being consumed by each pump along with its shaft RPM and will notify you if the pumps performance is suffering and may require maintenance. Third Party Integration The HYDROS WaveEngine is compatible with 3rd party controllers such as the Neptune Systems APEX, the Reef Angel,…

    $349.99 Regular Price: $
    Out of Stock

    power. Included WiFi lets you now connect to the internet even easier. With the Fusion Cloud interface, everything is easier from calibrating probes to customizing outlets. Fusion gives you the ability to monitor and control your Apex from anywhere in the world. Apex Control System The new Apex's

    $399.95 Regular Price: $

    …additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless. Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in…

    $1,519.90 Regular Price: $
    Choose Options

    …your Apex from anywhere in the world. The new apex controller lets you directly connect your WAV pumps to the EnergyBar 832. The WAV pumps don't take up any additional outlets on the EB832 and plug into the 1Link ports built into the power bar letting you control more equipment through the Apex for…

    $1,249.85 Regular Price: $
    Choose Options

    …of the problem, Neptune's answer is the 1LINK. It is called 1LINK because there is one power supply, one module (for up to three 1LINK devices), and a one-click-connection of a wire that carries not only the power for the device but two-way communication from it to your Apex. Setup is simply click…

    $159.95 Regular Price: $

    Use With or Without an Apex Controller! The intelligent Neptune COR-20 Return Pump is easily the smartest pump available. Directly connect to any Apex controller through an Aquabus Port, but if you do not have a controller, don't worry, you don't need one! The COR-20 is capable of stand-alone…

    $374.95 Regular Price: $

    …additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless. Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in…

    $2,129.60 Regular Price: $
    Choose Options

    …additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless. Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in…

    $2,846.45 Regular Price: $
    Choose Options

    …Bar 832 power module! Almost every aquarium we set up has an Apex Controller as the brain behind the tank, and always requires more than 8 outlets for full control. Now with the extra EB832 you get 16 total controllable outlets along with the full features of the Neptune Systems Apex Controller!…

    $1,169.90 Regular Price: $
    Choose Options

    …Cord Rails: 7 Internal Shelf: 1x 7L x 2.5W Whats Included? Custom Neptune Systems Controller Board Neptune Systems LED Logo Board Power Supply Remote Control French Cleat Wall Mount 2x Cord Cutout Plugs 2x Velcro Mount Sets for LED Logo Board *Note: Neptune Systems Apex Controller sold separately.

    $379.99 Regular Price: $
    Choose Options

    …Pairing an Apex Controller with the LDK lets you monitor and control your aquarium in the event of a leak or an overflow. With Neptune Fusion, you can easily set up alarms that will notify you if a sensor ever detects moisture, and also control any equipment that is powered by an EnergyBar.…

    $594.85 Regular Price: $
    Choose Options

    …an Apex at all yet no worries with the optionally available 24v Power Supply, the GRO can be used on any aquarium as a standalone refugium light. Specifications Recommended Coverage: 24 x 18 Dimensions: 8.7" L x 6.1" W x 1.4" H Voltage: 24v Power Consumption: 20 Watts Whats Included? Neptune Systems…

    $144.95 Regular Price: $

    …such as excessively high ambient air temperature, it will throttle the power to the LED to keep them safely cool. Multiple Mounting Options Many lights on the market force you into purchasing their mounting solution. Neptune decided to broaden your options by adopting a standard already widely used…

    $869.95 Regular Price: $

    …an Apex at all yet no worries with the optionally available 24v Power Supply, the GRO can be used on any aquarium as a standalone refugium light. Specifications Recommended Coverage: 24 x 18 Dimensions: 8.7" L x 6.1" W x 1.4" H Voltage: 24v Power Consumption: 20 Watts Whats Included? Neptune Systems…

    $144.95 Regular Price: $

    Add leak detection to your Neptune Apex Controller Neptune's LDK (Leak Detection Kit) includes everything you will need to add leak sensors to your Apex Controller within minutes. Includes two leak sensors Compatible with all Apex models Powered through Aquabus connection Add up to four total leak…

    $154.95 Regular Price: $

    …1Link Power Connection Temperature Monitoring Up to 1500 GPH Internal or External No Power Bricks COR-15 Requires Apex Controller. Don't have an Apex? Check out the Neptune SystemsCOR-20. Advanced Control The COR pumps were built from the ground up with control in mind. Have power over everything…

    $314.95 Regular Price: $

    …gives you the ability to monitor and control your Apex from anywhere in the world. The Neptune Systems EnergyBar 832 is 100% compatible with the ApexEL, with more robust outlets, individual LEDs show the status of each outlet, per outlet power consumption monitoring. An added bonus to the EB832…

    $849.90 Regular Price: $
    Choose Options

    The Neptune Systems 1Link Male x Male 4 pin cable lets you directly connect your DS Fluid Metering System to a 1Link module or EnergyBar 832. By having your DS system connected through a 1Link port will let you remove the bulky power supply brick saving room and removing clutter. Features Less…

    $21.95 Regular Price: $

    …it delivers WHAT'S IN THE BOX 1x DOS Fluid Metering System DOS pump Aquabus cable 4 meters of tubing Power supply 1x DDR DOS Dual Reservoir DDR with sensors and cable 4 meters of tubing Getting Started Guide Requires: Apex, Apex Classic, ApexEL, Apex Jr., or Apex Light Neptune DOS Instructions

    $479.95 Regular Price: $
    Choose Options

    …gives you the ability to monitor and control your Apex from anywhere in the world. The Neptune Systems EnergyBar 832 is 100% compatible with the ApexEL, with more robust outlets, individual LEDs show the status of each outlet, per outlet power consumption monitoring. An added bonus to the EB832…

    $1,199.90 Regular Price: $
    Choose Options

    …enables your Apex to do: Flow Monitoring Leak Detection Water Level Detection Power 24VDC accessories Future sensors Return pumps Measuring the flow of your aquarium’s main return pump is an incredibly useful piece of information. The key benefit would be to have the Apex notify you the…

    $209.95 Regular Price: $
Sign Up Now