- Home /
- Pan World 250PS
-
Schedule 80 Union Thread x Thread
Starting at: $5.99
-
Cepex Ball Valve
Starting at: $20.99
-
Spears Gate Valve Thread x Thread
Starting at: $24.99
-
Braided Vinyl Tubing Sold by the Foot
Starting at: $1.29
-
Awesome Pump By Brian S on 12/10/12
Brian S would recommend this product to a friendI've had the 250 ps pump for 6 months and have it pumping a 200 gal system where the display tank is a floor upstairs, about a 20 foot rise. I have to close a ball valve to limit it's output to about 1/2 cause this thing moves some water. I have my sump in the basement and the 200 ps would have been enough. In fact I'm getting a 200 ps as this pump's backup. Love it and would recommend to a friend. Do yourself a favor and use tapcons to mount a piece of wood like a 2 x 6 to the concrete floor. Then a piece of rubber to dampen vibration and mount the pump to the block of wood sandwiching the rubber. We can't hear this at all once mounted correctly. -
Excellent pump ! By Bryan on 9/23/12
Bryan would recommend this product to a friendI have this pump currently in use at my mixing station. I have it set up to move water from container to container to mix my salt and move water from the basement to the display tank. I can do a 40 gallong water change in about 5 minutes with this pump. Eventually I will use it as a return when I move my sump to the basement. -
lots of pressure at a price By hartin461 on 5/10/12
hartin461 would recommend this product to a friendHad the 250 for about 10 months now and am very happy with it.I have a basement sump feeding a 180 tank and 2 breeders along with a 100 gallon sump. Plenty of pressure and noise is nothing but a hum. Does cost me about $35 a month at 16 cents a kilo watt though.Very pleased... -
Definitely Powerful By dtawahn on 5/7/12
dtawahn would recommend this product to a friendYes, this was more than enough pump for our tank. We placed small fans around the pump to promote cooling, because the pump does create a lot of heat. Once the temperature is controlled, we have an awesome pump that is pretty quiet. We might end up running pipe under the house to store the pump down there for extra cooling and noise control. -
Powerful yet quiet By Tina on 2/19/11
Tina would recommend this product to a friendthis pump puts out the FULL 1900 gph. Not for the little tank. I was running text to an Iwaki MD70RLT and it was quieter. I know run 2 of these. I have one running my undergravel jets which are split into 2 outputs and those split into 8 output jets each and I still have good flow.
The other runs my sump return and is split into 2 returns with locline. The flow output is awesome. In fact I will probably put a y on the ends of each and split it again just for more circulation. -
More pump than I expected By TK on 1/6/11
TK would recommend this product to a friendI was planning on buying the 200 to drive dual Kent 3/4" venturi valves on my 4' homemade skimmer. I figured for the extra $30 I would just get the bigger 250. Should have stuck with my original plan, I need to add a ball valve to "bleed off" some pressure. This is a BIG & POWERFUL pump. B+ on the noisy scale.
-
Iwaki and Panworld External Pumps
In this demo we are going to explain the differenc ...
More16231 Views
Ask a Question About 'Pan World 250PS'
Previously Asked Questions
No questions have been asked yet.
Pan World makes a good quality, low to medium flow, seal-free centrifugal pump engineered for high performance and trouble-free operation. All Pan World pumps feature magnetic drives, seal free bearings and come with a two year parts and labor guarantee.
ATTENTION: Maintain the life of your pump.
99% of all pump failures and broken impellers are caused by foreign objects (snails, sand, gravel, hermit crabs, etc.) entering the pump housing. Pumps damaged by foreign objects are NOT covered under any warranty and are expensive to fix or replace. To prevent damage to your pump, we suggest using a bulkhead strainer on the intake bulkhead to reduce the possibility of a foreign object entering the pump. A variety of strainers from 1/2” to 2” are available at BulkReefSupply.com.
Quick Compare - Pan World |
|||||||||
Model | Power Usage |
Maximum Flow |
Maximum Head |
Connections |
|||||
|---|---|---|---|---|---|---|---|---|---|
PanWorld 30PX |
30W |
258 GPH |
10.1 Ft. |
MNPT In/Out ¾” |
|||||
PanWorld 40PX |
45W |
480 GPH |
13.5 Ft. |
MNPT In/Out ¾” |
|||||
PanWorld 50PX |
90W |
590 GPH |
16.5 Ft. |
MNPT In/Out ¾” |
|||||
PanWorld 100PX |
120W |
790 GPH |
21 Ft. |
MNPT In/Out ¾” |
|||||
PanWorld 50PXX |
90W |
1110 GPH |
13 Ft. |
MNPT In/Out 1” |
|||||
PanWorld 100PXX |
130W |
1270 GPH |
13 Ft. |
MNPT In/Out 1” |
|||||
PanWorld 150PS |
180W |
1100 GPH |
28 Ft. |
MNPT In/Out 1” |
|||||
PanWorld 200PS |
150W |
1750 GPH |
39 Ft. |
MNPT In/Out 1” |
|||||
PanWorld 250PS |
390W |
1900 GPH |
45 Ft. |
MNPT In/Out 1” |
|||||
-
Deal of the Day!
BRS Bulk Premium ROX 0.8 Aquarium Carbon
Ends in00:00:00:00
-
FREE PRIZE$
-
Bulk Media & Additives
-
Bulk Reverse Osmosis Filters & Systems
-
Bulk Dry Live Rock & Live Sand
-
Aquarium Additives
-
Auto Top Off Systems
-
Filter Media
-
Fish & Coral Foods
-
Fragging Supplies
-
Heaters & Chillers
-
Lighting
-
Medications & Pest Removal
-
Monitors & Controllers
-
Plumbing
-
Protein Skimmers
-
Pumps
-
Reactors
-
Sumps, Tanks & Refugiums
-
Tank Maintenance & Salt Mix
-
Testing
-
UV & Ozone
-
Videos & Books
-
Specials
-
Clearance
-
New Products
Send us your feedback
Let us know.
Company Info
Phone: 763-432-9691
Fax: 763-546-1720
Hours: 9am -5pm CST M – F

Email: support@bulkreefsupply.com
672 Mendelssohn Ave N, MN 55427 Map

