- Home /
- Ratchet Clamp for Tubing
Some problems By Scott on 7/15/13Scott would recommend this product to a friend3/4" will not allow full clamp down unless you use a shim of some kind and very hard to separate. Even with all that still safest material to use in my aquarium.
quick and easy! By James on 3/25/13James would recommend this product to a friendThese work for now, but I ordered both 1 and 3/4 inch sizes for my sump, they are holding water with no leaks, but long term I may need to find another style
Does not fit 1/2 tubing By Rob on 3/25/13Rob wouldn't recommend this product to a friendThese clamps were too big to cinch tightly over my 1/2 ID aquarium tube.
seems like they should work well By Brad on 1/23/13Brad would recommend this product to a friendI dont have water in the system yet, but they should work well. The only problem is, is that you need the next size up for whatever hose your using. Either that or BRS sent me the wrong ones. I have a 1" drain and a 3/4" return. So I ordered the 1" and 3/4" braided nylon tubing as well as the 1" and 3/4" clamps. I had to use the supposed 1" clamp for the 3/4" tubing. Im going to contact BRS tomorrow about this as they might already be closed. But i definitely recommend on buying a variety of sizes to be sure you have the right ones. But these should work just fine and not cause leaks like vanisher says he had a problem with. If you cant get them quite tight enough by hand just use some pliers to get a few more clicks on it. Dont squeeze too hard or yes you can break them as they are just plastic. But theres no reason they can make a good seal, or your have pressure thats more than what you should even be having in the lines.
Not that great By vanisher on 9/14/12vanisher wouldn't recommend this product to a friendI love BRS, and their recommendations are 99.999% spot on, but these I have to disagree with.
Yes, I agree plastic (pvc, abs, bla bla) is better than metal for reefing.
However, these couldn't get a tight clamp for the life of them.
I used the screw tighten metal ones, and guess what, the leaks stopped.
I guess I'll be replacing the metal ones every now and then. For now I get to return these.
Great alternative to metal By Nicholas on 8/7/12Nicholas would recommend this product to a friendThese are highly suggested when used around salt water. I couldn't find these locally either.
Hard to find By Nicholas on 8/7/12Nicholas would recommend this product to a friendI couldn't find this product anywhere local to me. They're great clamps when you need to use them in close proximity to saltwater.
Will not fit "two little fishes" ball valve. By David on 7/29/12David wouldn't recommend this product to a friendI purchased these to make a more secure union between my 1/2 inch tubing and the various valves and fittings I would be using. I chose the "two little fishes" brand for my valves. The 1/2" tubing I purchased fit perfect onto the valve, however the 1/2" da her will not close enough to tighten the tubing to the valve, even though it is tightened to the max. It just spins round and round very loose on the tubing. Just to let you know.
nice to have By Tim on 5/31/12Tim would recommend this product to a friendgreat to be able to get these instead of the metal screw drive ones. thanks BRS
Works Perfectly By Arteom on 2/18/12Arteom would recommend this product to a friendJust what I needed. Perfectly safe for a reef tank, no need to worry about rusting metal, and at around a buck a piece (As of 2/2012) its a no brainier! Simply snaps together, and slides apart just as easy! Remember this works on 13/16" - 3/4" OUTER Diameter tubing.
I suggest ordering a few more than you need & in various sizes, you'll find a use for them, trust me!
Not @ Home Depot By Mark on 2/17/12Mark would recommend this product to a friendYet one more of the many unique items you just can't find at the big box store that is absolutely necessary for reefing.
Plastic > Metal By Dustin on 2/13/12Dustin would recommend this product to a friendPlastic is the way to go around saltwater. Not only are these clips sturdy I also don't have to worry about the idea of rust getting in my system. I also don't have to worry about the headache involved in taking it back off!
There are no videos related to this product.
Ask a Question About 'Ratchet Clamp for Tubing'
Previously Asked Questions
by David on November 6, 2013, @9:04 AM
I have 1/2" tubing and wanted to know what size ratchet clamp I would need for that size tubing. Thanks.
Bulk Reef Supply Hey David,
All of our ratchet clamps and plumbing is listed in nominal sizes, so if you have 1/2" nominal tubing you would want the 1/2" ratchet clamp.
Choose from ratchet clamps for the following nylon tube sizes:
- 1/2" Braided Nylon Tubing
- 3/4" Braided Nylon Tubing
- 1" Braided Nylon Tubing
- 1.5" Braided Nylon Tubing
- 2" Braided Nylon Tubing
Deal of the Day!
BRS Bulk Kalkwasser Starter PackageEnds in
Regular Price: $54.99
Special Price: $47.9900:00:00:00
- Bulk Media & Additives
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- BRS Additives
- Red Sea Additives
- Korallen-Zucht Additives
- Two Little Fishies
- Fauna Marin Aquarium Additives
- Auto Top Off Systems
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Medications & Pest Removal
- Monitors & Controllers
- Protein Skimmers
- Sumps, Tanks & Refugiums
- Tank Maintenance & Salt Mix
- UV & Ozone
- Videos & Books
- New Products
Send us your feedback
Let us know.
Hours: 9am - 5pm CST M – F
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427