- Home /
- Kessil A Series Gooseneck
Starting at: $224.99
Starting at: $399.00
Starting at: $299.00
Not perfect, but does the job. By javier on 7/30/2014javier would recommend this product to a friendAlthough the light it supports is pretty impressive and of high quality, the gooseneck fails to fall into the same high regards as the light. The only reassuring thing about it is that it is built by the same company, so it must support it for years, but only time will tell.
However, it does have a very sturdy neck, but the plastic screws could be ...well, not plastic. However all around it is perfectly made for what it is intended to do and it does it perfectly.
Not 5 Stars for the plastic screws.
it's ok but ugly By Dan on 5/30/2014Dan would recommend this product to a friendThe product itself is of great quality - from what I can tell. Sturdy, just the right length, fits perfectly, however... I think it's a bit ugly, especially with the wires wrapped around. I really think Kessil should have ether made a hollow tube or made the gooseneck be the connector itself some way. I just got it so will give more of detailed opinion if I end up using em.
this is the best mount on the market By james on 5/19/2014james would recommend this product to a friendBest mount for the kessil light I have used.
Great product! By Jerry on 4/26/2014Jerry would recommend this product to a friendNice design. Good quality. Simple and easy setup. This is all you need to get the work done!
great and durable By Jordan on 3/15/2014Jordan would recommend this product to a friendWhen looking at the Goosneck by Kessil, I was wondering about it's ability to hold up after a long period of time. meaning the rod losing it's rigidness after some time due to use. However, the Goosneck is very strong and you know it will last a long time. Great product
works great By reef geek on 3/14/2014reef geek would recommend this product to a friendthese goosenecks work great for my new kessil 360s they are very well built and are nice and flexible to adjust light to certain area of the tank! just need a conduit to channel the wires and the would be really classy!
Best option available By Ryan on 3/10/2014Ryan would recommend this product to a friendThe mount is simple and secure.
You get a few black tie wraps for cable management - I would like to have seen a more engineered solution.
My only other complaint is that it doesn't quite bend over far enough to point straight down at the center of a 12" wide tank when mounted on the tank's back wall. An 18" wide tank would be no problem. I'm using a chain of tie-wraps to hold the gooseneck in its fully doubled-over position.
This easily beats hanging from the ceiling, though. I'm satisfied.
Looks Great By TremontReefer on 1/13/2014TremontReefer would recommend this product to a friendThis gooseneck looks great on my tank. Holds Kessil light in perfect position.
Worth the price By Robert on 12/18/2013Robert would recommend this product to a friendGooseneck is easy to mount on many tanks. Screws into kessil (and mount) tight.very flexible but firm enough to hold at any angle. Seems quite sealed to prevent corrosion.
Excellent fit function and value By Z on 12/6/2013Z would recommend this product to a friendOf the three different brands of lights I have used so far, this is by far the most cost-effective and 'slick' mount I have used. Simple install, simple clean functionality and for the price, you can't beat it. I'd recommend this to any Kessil owner!
Good By StevieB on 11/17/2013StevieB would recommend this product to a friendGreat product! Nice construction and very strong. Beats hanging the lights from the ceiling and it looks great!
Ask a Question About 'Kessil A Series Gooseneck'
Previously Asked Questions
by Michael on February 3, 2014, @10:17 AM
I know you said these will work on the "lip" of a tank. I have 3/4" euro bracing with a small lip. I am wondering if this will still work?
Bulk Reef Supply Hi Michael,
The bracket on the goose neck will open up to about 1.25" at its widest. Its hard to say without seeing your tank but it sounds like that would work.
by Steve on November 27, 2013, @5:52 PM
Will it work on tanks with a lip?
Bulk Reef Supply Hey Steve,
It sure will. The bracket is large enough to accommodate the lip on your typical tank.
by Joseph on January 20, 2014, @1:04 PM
This light suspension system looks great. Is it bendable? I have a 54gallon corner reef tank I'm building and it's difficult to find a light to adequately illuminate the tank. That being said, I'd need it to be flexible so I can position it in the optimal location.
Bulk Reef Supply HI Joseph,
The gooseneck bends quiet easily and is a great option if your looking for a flexible way to hang your Kessil.
by Ryan on June 16, 2014, @5:57 AM
What is the total length of the gooseneck?
Bulk Reef Supply The length of the flexible part of the gooseneck is about 24" if laid out straight. From there you can bend it to your liking.
- Kessil A360N / A360W LED
- Kessil A350 / A350W LED
- Kessil A150 Led Models
Deal of the Day!
EcoTech Radion XR30w G3 PRO LED Light FixtureEnds in00:00:00:00
- Bulk Reverse Osmosis Filters & Systems
- Bulk Dry Live Rock & Live Sand
- Aquarium Lighting
- Auto Top Off Systems
- Calcium, Alkalinity & Trace Elements
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
- Monitors, Testing & Controllers
- Pumps & Plumbing
Skimmers & Reactors
- Internal Protein Skimmers
- External Protein Skimmers
- Hang On Skimmers
- Ozone Equipment
- Nano Skimmers & Accessories
- UV Sterilizers
- Sumps, Tanks & Refugiums
- Tank Maintenance & Salt Mix
- Specials, New & BRS Gear
Send us your feedback
Let us know.
Phone Hours: 7am - 7pm CST M-Th
10am-4pm CST Friday
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427