- Home /
- Glass Drill Bit Guide THK
Easy to use By QOTD on 8/20/2014QOTD would recommend this product to a friendUsed this the first time I ever drilled holes in glass. Worked great keeping the drill from sliding on the glass.
Works great! By Doug on 3/9/2014Doug would recommend this product to a friendI have used this many times and it works great! I used to use a piece of plywood, drilling thru that first, then into the glass. It works but this is better. The suction cup holds solid and the drill does not slide around. Use no pressure, just let the bit do the work and hold a wet sponge against it to keep it cool. Works every time!
Works great! By Doug on 1/30/2014Doug would recommend this product to a friendI used this along with the diamond coated drill bit and it works great. I know you only need it to start but I just left it on for the entire hole. Just hold a wet sponge against the drill bit to keep it wet and cool and don't push, let the drill do the work. I've seen people start holes with a piece of wood and I tried that too but this works nice! Good product.
Must have By Big kel on 5/2/2013Big kel would recommend this product to a friendGave me confidence that the bit wouldn't jump and it made it easy!
works great By flipper on 12/3/2012flipper would recommend this product to a friendI only used it a couple time when making a custom sump out of a couple 10g aquariums. It works well to keep the bit in place when you start to drill the hole.
Like butter By Corbin on 3/29/2012Corbin would recommend this product to a friendI had never drilled a tank before. This guide is all you need to start your hole. Once it's started the drill will guide itself and as long as you don't punch the glass you'll have a perfect cut.
Very good for a guide By Daniel on 3/8/2012Daniel would recommend this product to a friendI have been working on new project that need holes drilled and before using this guilde was hard to keep glass saw from slipping or marking the glass. Great for a guide for fussy people like me
Great product to get your hole lined up properly By Dennis on 2/20/2012Dennis would recommend this product to a friendI'm in the process of setting my system back up after a two year hiatis. I've drilled four holes with it from a 1/2" bulkhead to a 1 1/2" bulkhead. The product is great for putting the hole right where you want it. Use it to get the hole started then pull it off to finish the cut.
Great Product By Joel on 4/21/2011Joel would recommend this product to a friendI have used this four times now and love it. I like this because it is cheaper than the drill guide and keeps the hole saw from floating. I have not had any problems drilling glass with it. Awesome for the price.
There are no videos related to this product.
Drill guide is used to eliminate bit wobble and ensure the beginning of your cut is straight. Once the cut is started it is a piece of cake. The bracket includes a level actuated suction cup to hold it securely in place both vertically and horizontally.
The drill guide is adjustable up to 83mm bits.
Deal of the Day!
BRS Biopellet Reactor Combo KitEnds in$74.9900:00:00:00
- Rock & Sand
- Auto Top Off
- Cal, Alk & Trace
- Controllers & Testing
- Filter Media
- Fish & Coral Foods
- Fragging Supplies
- Heaters & Chillers
Pumps & Plumbing
- Submersible Pumps
- External Pumps
- Dosing Pumps
- Air Pumps & Accessories
- Salt & Maintenance
- Skimmers, Reactors & Filtration
- Sumps, Tanks & Refugiums
- Specials, New & BRS Gear
Send us your feedback
Let us know.
Phone Hours: 7am - 7pm CST M-Th
10am-4pm CST Friday
6325 Sandburg Road, Suite 400
Golden Valley, MN 55427 Map
View Larger Map 6325 Sandburg Road, Suite 400, Golden Valley, MN 55427