Ask a question
It is designed to be used for attaching corals to frag mounts and live rock, under water or out. Simple to use and is safe for all fish, corals and invertebrates in freshwater or marine aquariums. Purple color appears as natural coralline inside the aquarium.
- Easy to use
- Great for aquascaping live or dry rock
- Hardens in 5 minutes and fully cures in 45 minutes
- Cures purple to blend in
- 100% reef safe
Great By Dillion on 3/2/2016Dillion would recommend this product to a friendWorks great, dries strong. Probably works best with lightweight rocks. Smells awful so make sure you use it in a ventilated space. Also use gloves because the smell sticks on your fingers. Color is natural and looks nice in reef tank.
Works Great By Lukas on 2/1/2016Lukas would recommend this product to a friendTube is a little on the small side and can go very quickly. It looked quite purple when I first used it. However, once it had a chance to age in the tank a bit, I can honestly say it's the least intrusive epoxy I've used.
As for it foaming the skimmer over, this is an understatement. Because of the way my sump is set up I was able to use this to my advantage to perform a wet skim water change. I figured that whatever was causing the skimmer to overflow would likely be removed in the overflowing skimmate. I hooked a drain line up to my skimmer, ran it into one bucket, plopped my ATO pump in a bucket of fresh saltwater and dumped/topped off buckets as it went. Once it stopped I returned my setup to normal and everyone and everything was happy. Took probably about 45 minutes to an hour to settle out for me.
works great By Jason on 1/29/2016Jason would recommend this product to a friendNice looking and doesn't fall apart.
Its decent but your skimmer will hate you By Zak on 1/3/2016Zak wouldn't recommend this product to a friendThe color is great and the strength once cured is great, but I used not even 1/4 of a stick in one sitting and my skimmer was constantly overflowing for more than a week. Ended up doing a 20 gallon WC on my 65 to get it to calm down. Will be using IC gel next time and hopefully give away the rest of this epoxy to a friend.
Liked it By Aquacap on 12/17/2015Aquacap would recommend this product to a friendForms very nicely. Sticks well. Color and form looked great under water after cured.
Sticky Epoxy By Gene on 11/10/2015Gene would recommend this product to a friendOceans Wonder Coralline Epoxy is just what you need for attaching coral to vertical surfaces.
Works Great / STINKS! By Jessica on 9/4/2015Jessica would recommend this product to a friendI used this produce to help secure some BRS Reef Saver Rock combined with the Super Gel and it worked really well. My application was used dry not underwater and I used it for support, not expecting it to hold large heavy pieces together under force. It works fantastic to help support pieces from moving around once in place.
The smell is awful and gives me a headache.. but it goes away. Definitely use latex gloves are your hands will stain. Do not mix all at once it will turn to rock before you can use it. Cut it into small pieces and remove the plastic and mix together. Once it has a solid purple color you have a few minutes maximum to apply before it hardens.
Great product and love the color.
Great epoxy By Andrew on 8/29/2015Andrew would recommend this product to a friendTried different brand of epoxy and this by far is the best. Harden quick. The only complain is that it smell like burnt paper. so far the epoxy is doing it's job, holding the frag in place.
great By hans24hrs on 12/15/2014hans24hrs would recommend this product to a friendBy far the best puddy I have used. Great color. Ad hears to rock work with no problems.
Good epoxy, but there is a caveat By madmanhiker on 12/11/2014madmanhiker would recommend this product to a friendThis epoxy does work, and yes, it sticks to high heaven. Some tips, use latex gloves when preparing, don't use a ton to get the job done either. Some advice: This WILL cause your protein skimmer to overproduce bubbles - in a big way. I have a 90 with 3 small areas where this epoxy was used to create perches for future frag growth. My Reef Octopus NWB-150 SSS started producing crazy bubbles...... still is in fact. Need to run carbon and a LOT of it to suck up the "reef safe" toxins this is producing to get the skimmer back to normal. Also, I used this on clean, dry base rock. During reef scaping, the tank was dry and empty and I built the entire reefscape on a PVC backbone. This epoxy had 3 full weeks to dry and cure out of water - and it still leeches today. Just sayin............................... good luck.
The best epoxy ever By Isaac on 4/21/2014Isaac would recommend this product to a friendIt stinks! But really! So does all Reef Epoxy. This stuff bonds quickly, looks alright, and works magic combined with super glue. I don't stick anything in my tank without it! Very mailable, and a quick dry time.
Best Reef Epoxy I have used to date By Chuck on 3/14/2014Chuck would recommend this product to a friendI just used some of this to prop up some rockwork, and I am very impressed. It is much more sticky underwater than any other epoxy I have used. In general, reef epoxies seem to take on a slimy and slippery texture when under water, but this epoxy remains firm and rubbery.
Based on my experiences, I'm going to order some more. This will be my go-to reef epoxy going forward.